F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NSWC INDIAN HEAD DIVISION
Contract Value
Not provided
Codes & Classification
Solicitation Number
N00174-26-RFPREQ-W72-0007
NAICS
334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
Classification Code
1270
Additional Details
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), under the Department of the Navy, has issued a Sources Sought notice (Procurement Identifier: N00174-26-RFPREQ-W72-0007) to conduct market research for an F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System (RDAS). This notice is strictly for information gathering and planning purposes in accordance with FAR Part 10; it does not constitute a Request for Proposal (RFP) and does not obligate the government to award a contract.
Purpose and Scope:
NSWC IHD seeks to identify qualified vendors capable of supplying a comprehensive RDAS designed to support the testing and monitoring of gun systems used in F-35 and F/A-18 aircraft. The system must facilitate the acquisition, control, and logging of performance data during gun acceptance and operational testing, replicating instrumentation standards found at production gun test facilities. The intended outcome is to enhance the Navy’s ability to safely and accurately test and validate gun systems, ensuring operational readiness and compliance with technical requirements.
Key Requirements and Objectives:
The RDAS must be an integrated solution comprising a test and control console, computer workstation, and junction box. It should be capable of controlling and monitoring performance data for F/A-18 A/A49A-1, A/A49A-2, and F-35 GPU-8/A, GPU-9/A gun pods. Specific technical requirements include:
- Interface and control of the 20mm M61A1/A2 gun in F/A-18 configurations, with an integrated lane-capable Gun Control Unit (GCU).
- Direct interface with GPU-8/A and GPU-9/A Gun Systems Control Unit (GSCU) for 25mm gun pods.
- Manual swapping of control and telemetry cables between platforms is acceptable, provided all connectors and bulkheads are military or industrial grade and rated for high-cycle use.
- Replication of baseline gun acceptance output, logging, and monitoring instrumentation, with data points including gun rate, trigger/arm/safing signals, steady state rate, acceleration/deceleration time, hydraulic flow and pressure, fluid temperature, rounds fired, and rounds cleared.
- Operation using existing test range utility power supplies: 115 VAC (1-Phase, 60 Hz), 300 VDC (2.0 A), and 28 VDC (30.0 A).
- Incorporation of a hardwired, fail-safe “dead-man switch” accessible to the Range Safety Officer, which immediately disarms the weapon drive and inhibits fire control commands upon release.
- Delivery of a complete Operational and Maintenance Manual covering console, software, cabling, calibration, safety interlocks, and troubleshooting.
- Provision of system drawings, factory calibration data, wiring schematics, and interconnection drawings with final hardware delivery.
- Hands-on operational training, integration, and dry-fire range demonstration at Picatinny Arsenal following installation.
- Live fire testing of the system with applicable gun systems prior to government delivery, as government test facilities are not available for live fire testing.
Expected Deliverables:
Contractors are expected to deliver a fully integrated RDAS, complete documentation (manuals, schematics, calibration records), and provide operational training and demonstrations. Live fire verification testing must be conducted at contractor facilities, which must be appropriately licensed and compliant with relevant regulations (ATF licensing, Net Explosive Weight storage, DoD 4145.26-M).
Contracting Entity and Location:
The contracting entity is NSWC Indian Head Division, a federal office under the Department of Defense and Department of the Navy. The primary location for installation and demonstration is Picatinny Arsenal, NJ 07806.
Classification Codes:
- NAICS Code: 334515 (Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals)
- Product Service Code: 1270
Procurement Type and Special Considerations:
This is a Sources Sought notice for market research; no set-aside requirements or procurement type (e.g., full and open, small business) are specified at this stage. Contractors must demonstrate capability to meet all requirements, provide a rough order of magnitude price estimate, outline their live fire testing plan, and confirm facility compliance with relevant safety and licensing standards.
Submission Instructions and Contact Information:
Interested vendors must submit responses in PDF format (maximum 15 pages) by 16:00 Eastern Time on November 13, 2026. Submissions should include company information (name, address, point of contact, phone, email, business size, Unique Entity ID, CAGE Code), a summary of capabilities, and delivery timeframe. Responses should be sent to:
- David Harvey, NSWC IHD, Picatinny Arsenal, NJ 07806, [email protected]
- Sean McAvoy, NSWC IHD, Picatinny Arsenal, NJ 07806-5000, [email protected]
For further details, contractors may refer to the official notice at https://sam.gov/opp/32c0878f808e460396b0a025e5902528/view.
This opportunity is best suited for firms with proven experience in manufacturing and integrating advanced instrumentation for military gun systems, and with the capability to conduct live fire testing in compliance with federal regulations. The requirements outlined are expected to remain constant throughout the contract lifecycle, focusing on system integration, safety, data acquisition, and operational support.