Dispersive Mirror

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

SLAC Natl Accel Lab -DOE Contractor

Contract Value

Not provided

Codes & Classification
Solicitation Number

SLAC_368931_DispersiveMirror

NAICS

-

Classification Code

AJ12

Additional Details
Set Aside

None

Place of Performance

Menlo Park, California, UNITED STATES

SourceSAM
SLAC National Accelerator Laboratory, operated by Stanford University for the U.S. Department of Energy, has issued a solicitation (Procurement Identifier: SLAC_368931_DispersiveMirror) for the supply of specialized optical components—specifically, highly dispersive mirrors and chirped mirrors. This procurement supports SLAC’s advanced research initiatives and is managed under a DOE-approved purchasing system, though it is not directly subject to the Federal Acquisition Regulations (FAR). Certain federal laws, executive orders, and regulations may still apply as required by statute or contract. **Purpose, Scope, and Intended Outcomes:** The primary objective of this procurement is to acquire two types of precision optical mirrors—HD120+AR Ultra Precision Highly Dispersive Mirrors and CM2699 Chirped Mirrors—for use in SLAC’s scientific instrumentation. These components are critical for manipulating laser pulses in high-precision experiments, supporting SLAC’s mission in cutting-edge accelerator and photon science. The procurement seeks to ensure timely delivery of high-quality, technically compliant optics that meet stringent performance and dimensional specifications. **Key Requirements, Objectives, and Deliverables:** The solicitation requests quotations for the following items: - **HD120+AR Ultra Precision Highly Dispersive Mirrors** (FS 38.1mm diameter x 12.7mm thickness, Pl (192)), Quantity: 150 - **CM2699 Chirped Mirrors** (FS 38.1mm diameter x 12.7mm thickness, Pl (192)), Quantity: 80 Both mirror types must adhere to detailed technical specifications, including: - Substrate: Corning 7980 0F fused silica - Dimensions: 38.1mm diameter, 12.7mm thickness, with tight tolerances (+0/-0.1mm diameter, ±0.1mm thickness) - Surface quality: S1 (5/3x0.04), S2 (commercial polish) - Flatness: S1 PV 80% - Parallelism: <10 arcmin - Chamfer: Break sharp edges - Marking: UFI logo, arrow to S1, and a 6-digit serial number for traceability - Compliance with ISO 10110 standards **Performance Parameters:** - **HD120+AR Highly Dispersive Mirror:** Central wavelength 1030nm, wavelength range 935–1125nm, GDD -200 fs², reflectance ≥99.9% (p-polarization), AOI 5°, AR stress compensation on S2. - **CM2699 Chirped Mirror:** Central wavelength 1035nm, wavelength range 950–1120nm, GDD -50 fs², average reflectance ≥99.9% (p-polarization), AOI 5°, AR stress compensation on S2. **Technical Acceptability:** - Brand name or equivalent products are acceptable, provided all performance and dimensional requirements are met. - The primary HR/GDD coating may be on S2 if S1 surface quality and flatness are maintained. - AOI range of 5–6° is acceptable for the 5° AOI requirement. **Evaluation Criteria:** - **Lowest Price Technically Acceptable (LPTA):** Source selection will be based on the lowest price among technically acceptable offers. - **Technical Evaluation:** Includes compliance with mirror specifications, past performance (successful delivery of similar parts in the last four years), and demonstrated manufacturing capabilities and capacity (including lower-tier subcontractors). - **Past Performance:** Offerors must provide documentation of prior manufacturing and test plans for similar components, with consideration given to historical reliability and integration into SLAC systems. - **Manufacturing Plan:** Offerors must submit a plan demonstrating adequate resources, project management, quality control, procurement, fabrication, and testing facilities. **Contracting Entity and Contact Information:** - **Contracting Entity:** SLAC National Accelerator Laboratory (DOE Contractor) - **Location:** 2575 Sand Hill Road, Menlo Park, California 94025, USA - **Product Service Code:** AJ12 - **Primary Contact:** Marissa Tanomrat, Procurement Commodities Team, [email protected] - **Alternate Contact:** Katherine Jill A. Coh, [email protected], 650-926-2770 **Procurement Type and Special Considerations:** - **Solicitation Type:** Request for Quotation (RFQ) for product supply only; no on-site services are permitted. - **Contract Type:** Fixed Price Purchase Order - **Terms and Conditions:** SLAC’s Fixed Price Commercial Supplies and Services Terms (August 2023) and General Terms and Conditions Supplemental Rider (August 2026) apply. Offerors must confirm acceptance or mark up terms for negotiation. - **Payment Terms:** NET-30 (NET-15 for small businesses); no advance or prepayments. - **Freight Terms:** FOB Destination Prepaid and Add; foreign shipments CIP SLAC, Menlo Park, Duty Unpaid. - **Buy American Act Certification:** Applies to items with a unit price over $15,000. - **Representations & Certifications:** Required; valid for one year. - **SAM Registration:** All subcontractors must be registered in SAM.gov. - **Proposal Requirements:** Include price, lead time, Harmonized Tariff Schedule (HTS) code, and ECCN if applicable. Academic, ICPT, GSA, or government discounts are encouraged if available. A published price list link is requested for price substantiation. - **Confidentiality:** Proprietary or confidential information must be clearly marked in proposals. **Response Instructions:** - **Quotation Deadline:** Close of Business, November 9, 2026 - **Submission:** Email proposals to [email protected] - **Addenda:** Acknowledge all amendments to the RFQ; failure to do so may render a proposal non-responsive. **Constant Elements Over Contract Lifecycle:** - The technical specifications, quality standards, and compliance requirements for the mirrors will remain unchanged throughout the contract. - The fixed price nature of the contract, payment terms, and SLAC’s standard terms and conditions will apply for the duration of the agreement. - All deliverables must meet the stated performance, dimensional, and marking requirements, and be delivered to SLAC’s Menlo Park facility. This opportunity is well-suited for manufacturers with proven experience in producing high-precision optical components for scientific applications, robust quality control systems, and the capacity to deliver large quantities within specified lead times. Interested contractors should carefully review the technical requirements and ensure their proposal addresses all evaluation criteria and submission instructions. For further details and to access solicitation documents, visit the official notice at [SAM.gov](https://sam.gov/opp/bc80a813c079459b9ff7e85b4ae04273/view).
Documents6