31--BEARING,BALL,ANNULA
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QYAHD
NAICS
332991 - Ball and Roller Bearing Manufacturing
Classification Code
3110
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of BEARING, BALL, ANNULA, under procurement identifier N0010426QYAHD. This requirement is classified under NAICS code 332991 (Ball and Roller Bearing Manufacturing) and Product Service Code 3110, and is intended to support national defense priorities, specifically for use in submarine and surface ship applications.
**Purpose and Scope**
The primary objective of this procurement is to acquire precision ball bearings, specifically part number M17931-C006, manufactured in accordance with MIL-DTL-17931F, "Bearings, Ball, Annular, For Quiet Operation," and other referenced military and industry standards. The bearings must be suitable for quiet operation and meet stringent quality and performance requirements, as they are intended for critical naval applications. The contract encompasses manufacturing, quality assurance, testing, packaging, and delivery of these bearings, with a focus on maintaining operational readiness and preventing work stoppages within the Navy’s supply chain.
**Key Requirements and Deliverables**
- **Qualified Products List (QPL):** Only suppliers currently approved by the Government and listed on the QPL for this item will be considered. Prospective contractors must be pre-qualified by the engineering activity prior to offer submission; the qualification process is extensive and cannot delay award.
- **Manufacturing Standards:** Bearings must adhere to MIL-DTL-17931F and associated documents, including but not limited to MIL-STD-12, ANSI/ABMA standards, MIL-STD-105, MIL-STD-129, SAE J418, AMS 6444, ASTM standards, and MIL-STD-973 for configuration management.
- **Quality Assurance:** Contractors are responsible for quality conformance inspection and testing per MIL-DTL-17931F, with sample sizes determined by MIL-STD-105. A quality conformance inspection report must be submitted using DD Form 1423. Government verification inspection (production lot testing) will be conducted at the Naval Surface Warfare Center, Carderock Division, Bethesda, MD, and consists of nondestructive testing. If testing is nondestructive, samples will be returned to the contractor.
- **Configuration Control:** Engineering change proposals, deviations, and waivers must be processed in accordance with MIL-STD-973 and submitted to the Contracting Officer at NAVICP-MECH.
- **Mercury-Free Requirement:** Bearings must be free from metallic mercury and mercury contamination, given their application in environments sensitive to mercury exposure. Any use of mercury must be pre-approved in writing by the Contracting Officer.
- **Marking and Packaging:** Physical identification and marking must comply with MIL-DTL-17931F and MIL-STD-129. Preservation, packaging, and packing must follow MIL-STD-2073 and contract schedule requirements.
- **Shelf Life:** Bearings are classified as shelf life code X (type 2, extendable, 60 months), with MIL-B-17931E bearings labeled for a 10-year (120 month) shelf life. Extension of shelf life requires program management approval and/or engineering evaluation.
- **Warranty:** A one-year warranty from the date of delivery is required for supplies of a noncomplex nature.
- **Data Deliverables:** Certification Data Reports must be submitted for each lot shipped, including objective evidence per DI-MISC-80678 and quality assurance provisions of MIL-DTL-17931F.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy.
- **Primary Contact:** Abigail R. Hurlbut, Telephone: 717-605-6805, Email: [email protected]
- **Location for Government Testing:** Naval Surface Warfare Center, Carderock Division, Building 60, Room 150, Code 617, West Bethesda, MD 20817-5700.
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a formal solicitation, and the resultant award will be issued bilaterally, requiring written acceptance by the contractor.
- **Emergency Acquisition Flexibilities (EAF):** The requirement is issued under EAF, indicating expedited processes due to national defense priorities.
- **Defense Priorities and Allocations System (DPAS):** The contract will be DO certified, signifying a rated order for national defense, emergency preparedness, and energy program use.
- **Production Lot Testing:** Mandatory production lot testing is required; details are provided in the local NAVSUP clause WWSTERMEZ02.
- **Option Provision:** The contract includes an option for increased quantity within 180 days post-award, allowing the Government to add additional units without re-solicitation.
- **Small Business Considerations:** Small business program representations are included, and subcontracting plans may be required for DoD contracts.
- **Past Performance:** NAVSUP WSS Mechanicsburg will evaluate past performance in accordance with FAR 13.106(a)(2).
**Constant Elements Throughout Contract Lifecycle**
- Adherence to MIL-DTL-17931F and referenced standards for manufacturing and quality.
- QPL supplier requirement and pre-qualification.
- Mercury-free material stipulation.
- Government and contractor quality assurance and inspection protocols.
- Configuration management and change control procedures.
- Warranty and shelf life requirements.
- DPAS priority rating and emergency acquisition context.
- Data deliverables and reporting requirements.
**Summary for Contractors**
This solicitation represents a critical supply requirement for precision ball bearings used in naval applications, with rigorous quality, testing, and configuration management standards. Only pre-qualified QPL suppliers are eligible, and contractors must demonstrate compliance with all referenced military and industry standards. The contract includes mandatory production lot testing, a one-year warranty, and strict mercury-free requirements. Contractors should be prepared to submit detailed certification and inspection reports, manage configuration changes, and support potential quantity increases post-award. Interested parties should review the full specifications and ensure their capabilities align with the technical, quality, and administrative requirements outlined by NAVSUP WSS MECH.
For further information or to request access to solicitation documents, contact Abigail R. Hurlbut at [email protected] or 717-605-6805. The solicitation is active and responses are due by December 8, 2026. Additional details and updates can be found at the official SAM.gov opportunity page: https://sam.gov/opp/a98c21a17409454a9307a97860826870/view.