PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNE97

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of a Parts Kit for a 3-inch Ball Valve, under solicitation number N0010426QNE97. This requirement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered). The solicitation is active and open for responses until November 27, 2026. **Purpose and Scope** The primary purpose of this procurement is to supply a Parts Kit for a 3-inch Ball Valve, which is a critical component used in vital shipboard systems. The kit consists of one Ball (Find No. 12) and two mating Seats (Find No. 9), manufactured in accordance with Naval Sea Systems Command drawings and specifications. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to ship safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, including serious injury, loss of life, or loss of shipboard systems. **Key Requirements and Objectives** - **Material and Certification:** The Ball must be made from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified. The Seats must be manufactured from Torlon 4503 per Electric Boat Specification 4147, requiring a Certificate of Compliance. - **Testing and Inspection:** Non-destructive tests (NDT) and hydrostatic tests are required, with certifications for weld repairs and production welds. Hydrostatic testing must be performed at 150% of the specified item pressure, with strict acceptance criteria. Dye penetrant inspection may substitute hydrostatic testing if necessary. - **Traceability and Quality Assurance:** Rigorous traceability is required for all materials, with permanent marking and certification data linking each component to its test reports. The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), including calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. - **Configuration Control:** The contractor must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Welding and Brazing:** All welding and brazing must comply with NAVSEA standards, with procedures and qualification data submitted for approval prior to execution. Certificates of Compliance for weld filler metals are required. - **Packaging and Marking:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. - **Security and Classified Information:** Access to certain drawings and documents requires a valid U.S. Security Clearance at the Confidential level. All classified material must be handled per the National Industrial Security Program Operating Manual (NISPOM). - **Government Source Inspection:** The contract provides for government quality assurance at source, and the place of performance may not be changed without authorization. - **Subcontractor Management:** The prime contractor must ensure all sub-tier suppliers meet quality and traceability requirements, with periodic audits and reviews. **Expected Deliverables** - Complete Parts Kit for 3-inch Ball Valve (one Ball and two Seats) manufactured and tested per specified drawings and standards. - Certificates of Compliance and test certifications for all materials and processes. - Documentation of traceability, quality system procedures, and configuration control. - Packaging and marking per contract requirements. - Submission of certification data to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Heather R. Jones, Telephone: 717-605-4866, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/b19996f5b2a5497cbf3e69f875dcb54d/view) **Procurement Type and Set-Aside** This solicitation is a total small business set-aside, in accordance with applicable Department of Defense regulations. The resultant award will be issued bilaterally, requiring written acceptance by the contractor prior to execution. The order is DO certified for national defense under the Defense Priorities and Allocations System (DPAS), reflecting its priority for emergency preparedness and energy program use. **Special Considerations** - Emergency Acquisition Flexibilities (EAF) apply to this requirement. - Past performance will be considered in the evaluation of offers. - Offerors must have a valid U.S. Security Clearance (Confidential or higher) to access classified annexes. - No material may be shipped prior to receipt of acceptance from Portsmouth Naval Shipyard. - All contractual documents are considered "issued" when transmitted by mail, facsimile, or electronic methods. **Constant Elements Over Contract Lifecycle** Throughout the contract lifecycle, the requirements for material traceability, quality assurance, configuration control, and compliance with security protocols will remain unchanged. The critical nature of the material, the need for rigorous testing and certification, and the obligation to maintain government source inspection and approval are fundamental to this procurement. **Summary for Contractors** Contractors specializing in metal valve and pipe fitting manufacturing, with experience in producing critical safety items for naval applications, and possessing robust quality assurance systems and security clearances, are well-positioned to respond to this solicitation. The opportunity requires strict adherence to technical specifications, traceability, and certification requirements, as well as compliance with government inspection and acceptance procedures. Interested parties should review the full solicitation and associated documents on SAM.gov and contact the primary contracting officer for further information.