PARTS KIT BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNF00

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QNF00) for the supply of a "Parts Kit Ball Valve." This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its focus on specialized shipboard valve components. **Purpose and Scope** The primary objective of this solicitation is to acquire parts kits for 2 1/2" ball valves, which are critical components used in essential shipboard systems. The kits must include one ball (Find No. 167) and two mating seats (Find No. 168), manufactured in strict accordance with Naval Sea Systems Command Drawing 801-6408784 and any additional specifications or modifications outlined in the solicitation. The intended outcome is to ensure the reliable operation of vital shipboard systems, where component failure could result in severe personnel injury, loss of life, or catastrophic damage to the ship. **Key Requirements and Deliverables** - **Materials and Certification:** - The ball must be fabricated from SAE-AMS-6931 or centrifugally cast 6AL-4V titanium (ASTM-B367, Grade C-5), with mechanical properties as specified in the applicable drawing or standard. - The seats must be made from DuPont AF DE588 (Teflon-filled Acetal/Delrin), meeting detailed ASTM property requirements. - All materials require full traceability and certification, including quantitative chemical and mechanical analysis, with certifications referencing the specific standards and acceptance criteria. - **Testing and Inspection:** - Ultrasonic inspection is required for the ball material, with performance and acceptance per SAE-AMS-6931 and SAE-AMS-2631. - Non-destructive testing is required for weld repairs and production welds, as applicable. - Visual and dimensional inspections are mandated for finished seats, with acceptance criteria specified in the contract support documentation. - All critical surfaces must meet stringent waviness and roughness requirements, verified prior to Teflon coating. - **Quality Assurance and Compliance:** - The contractor must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. - Higher-level contract quality requirements apply, and government source inspection (GSI) at the contractor’s facility is required. - Certificates of Compliance (C of C) must be provided, demonstrating full compliance with all specifications, traceability to individual items, and positive, unqualified statements of conformity. - All welding and brazing must comply with NAVSEA and MIL standards, with procedures and qualification data submitted for approval prior to production. - **Packaging and Marking:** - Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions. - Traceability markings are required on all components, with special provisions for Teflon seats (tagging instead of permanent marking). - **Configuration and Change Control:** - The contractor is responsible for maintaining configuration control and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - All waivers and deviations require prior approval from the Contracting Officer. - **Special Emphasis and Safety:** - The material is designated as "Special Emphasis" (Level I/SUBSAFE/CSI), invoking rigorous control procedures to ensure only correct and defect-free material is supplied. - Mercury and mercury-containing compounds are strictly prohibited. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Heather R. Jones, Phone: 717-605-4866, Email: [email protected] **Procurement Type and Special Considerations** - This is a formal solicitation (active as of 28 October 2026) with a response deadline of 27 November 2026. - The procurement is a total small business set-aside, restricting competition to qualified small businesses. - The order is rated under the Defense Priorities and Allocations System (DPAS) as DO/DX, indicating priority for national defense and emergency preparedness. - Emergency Acquisition Flexibilities (EAF) apply, and the award will be bilateral, requiring written contractor acceptance. - Past performance will be considered in the evaluation of offers. **Constant Elements Over Contract Lifecycle** - The requirement for strict material traceability, certification, and compliance with all referenced standards and drawings will remain throughout the contract. - The need for government source inspection, configuration control, and adherence to quality assurance protocols will persist. - All documentation, inspection, and certification requirements, as well as the prohibition of mercury, will be enforced for the duration of the contract. **Summary for Contractors** This opportunity is suited for small businesses with proven capabilities in precision manufacturing, quality assurance, and compliance with stringent military and NAVSEA standards for critical shipboard components. Contractors must demonstrate robust quality systems, experience with high-reliability materials (titanium, Teflon-filled acetal), and the ability to manage detailed traceability and certification processes. The contract’s emphasis on safety, configuration control, and government oversight underscores the importance of disciplined production and documentation practices. Interested parties should review the full solicitation and referenced drawings/specifications, ensure compliance with all requirements, and direct any questions or requests for drawing access to the primary contact listed above. The solicitation and additional details can be found at: https://sam.gov/opp/ced72d07183b4d28bcae57640a4ecd14/view.