PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QND25
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QND25) for the supply of a Parts Kit for a 3-inch Ball Valve, classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This procurement is a total small business set-aside, inviting qualified small business contractors to respond by November 26, 2026.
**Purpose and Scope**
The primary objective of this procurement is to acquire a Parts Kit for a 3-inch Ball Valve, which is integral to a critical shipboard system. The kit consists of one Ball (Find No. 123) and two matching Seats (Find No. 144), manufactured in strict accordance with Naval Sea Systems Command drawing 801-6408784 and related specifications. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems.
**Key Requirements and Deliverables**
- **Materials and Certification:**
- The Ball (Find No. 123) must be made from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified.
- The Seats (Find No. 144) must be manufactured from Torlon 4503, 4203, or 4203L (unfilled polyamide-imide) per Electric Boat Specification 4147, with a Certificate of Compliance required.
- Quantitative chemical and mechanical analysis is mandatory for the Ball; certification for non-destructive tests, ultrasonic inspection, hydrostatic test, and dye penetrant inspection is required as specified.
- **Testing and Inspection:**
- Hydrostatic testing of each Ball at confidential pressures, with certification referencing the appropriate drawing and item number.
- Seat stack height measurement and thread inspection per FED-STD-H28 or ASME B1 series.
- Surface waviness and Teflon coating requirements for the Ball, using Chemours Company (formerly DuPont) coatings as specified.
- Welding and brazing procedures must be qualified and submitted for approval, with full certification and traceability for weld filler metals.
- **Quality Assurance and Traceability:**
- Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025.
- Material traceability from raw material to finished component is required, with permanent marking for traceability and identification per MIL-STD-792.
- Certificates of compliance must show traceability to marking applied on each item and include detailed information as outlined in the solicitation.
- **Packaging and Delivery:**
- Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance.
- **Security and Access:**
- Offerors must possess a valid U.S. Security Clearance of Confidential or higher, as the solicitation includes an annex classified at the Confidential level.
- All classified material must be handled in accordance with the National Industrial Security Program Operating Manual (DoD 5220-22-M) and Industrial Security Regulation (DoD 5220.22-R).
- **Contract Administration:**
- The award will be issued bilaterally, requiring written acceptance by the contractor.
- The contract is DO certified for national defense under the Defense Priorities and Allocations System (DPAS).
- Past performance will be considered in the evaluation of offers.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Heather R. Jones
- Telephone: 717-605-4866
- Email: [email protected]
**Location and Classification**
- **NAICS Code:** 332919 (Other Metal Valve and Pipe Fitting Manufacturing)
- **Product Service Code:** 4820
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/7d834c6020ad47589707aade4dd335d9/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price supply contract
- **Set-Aside:** Total Small Business Set-Aside
- **Priority Rating:** DO certified for national defense (DPAS)
- **Emergency Acquisition Flexibilities:** This requirement is issued under Emergency Acquisition Flexibilities (EAF).
**Constant Elements Throughout Contract Lifecycle**
- The requirement for rigorous quality assurance, traceability, and certification will remain constant.
- Security clearance and handling of classified materials are ongoing obligations.
- Compliance with all referenced specifications, standards, and drawings is mandatory.
- The contract will require ongoing communication and data submission via WAWF and ECDS.
- Government inspection and acceptance procedures, including source inspection and review of certification data, are integral to contract performance.
**Summary for Contractors**
This solicitation represents a highly specialized and critical supply requirement for the U.S. Navy, demanding strict adherence to technical, quality, and security standards. Contractors must demonstrate robust quality systems, proven traceability processes, and the ability to handle classified information. The opportunity is well-suited for small businesses with experience in manufacturing critical shipboard components, particularly those with established procedures for certification, inspection, and compliance with naval specifications. Interested parties should review the full solicitation and ensure all requirements, including security clearance and quality assurance documentation, can be met prior to submission.
For further information or to request access to drawings and documents, contact Heather R. Jones at the provided email or phone number. All responses must be submitted by November 26, 2026.