STEM ASSY
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNE96
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of a "STEM ASSY" (Stem Assembly) under procurement identifier N0010426QNE96. This requirement is classified under NAICS code 332919, "Other Metal Valve and Pipe Fitting Manufacturing," and Product Service Code 4820, indicating its relevance to shipboard valve and pipe fitting components. The solicitation is currently active, with responses due by November 26, 2026.
**Purpose and Scope**
The primary purpose of this procurement is to acquire a complete stem assembly for a 1-inch ball valve, intended for use in a critical shipboard system. The assembly is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its importance to the safety and operational integrity of naval vessels. The use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, stringent control procedures and quality assurance requirements are invoked to ensure the receipt of correct and fully compliant material.
**Key Requirements and Objectives**
The stem assembly must be manufactured in accordance with Newport News Drawing 2285-296 and modified to General Dynamics Drawing SS845-2445483, Assembly GV. The assembly consists of specific components, including the stem, retaining nut, and bushing, with detailed material and dimensional requirements:
- **Stem:** Material must be QQ-N-286, cold drawn, annealed and age hardened, or hot finished, annealed and age hardened. Quantitative chemical and mechanical analysis is required.
- **Retaining Nut:** Piece 382 on Drawing 2445483 must be ASTM-B505, Alloy UNS C90300. No quantitative chemical and mechanical analysis required.
- **Testing Certification:** Certifications are required for annealing and age hardening of the stem, with slow strain rate tensile tests performed by approved laboratories.
- **Modified Stem Dimensions:** The ball mating end must be machined per the master plan, modified by the dimensions shown on drawing SS845-2445483.
- **Nylon Plug:** Piece 600 must be 1/8 inch diameter and 3/32 inch long (+1/64 / -0), fitting securely in the nut.
- **Welding/Brazing:** All welding and brazing must comply with S9074-AR-GIB-010A/278 and S9074-AQ-GIB-010/248, performed by qualified personnel and procedures. Repair welding is not permitted on UNS C90300 material.
**Quality Assurance and Traceability**
The contract mandates a higher-level inspection and robust quality assurance system, requiring compliance with ISO-9001 (or MIL-I-45208 as an alternate), and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The contractor must maintain traceability from material to certification test reports, with permanent marking requirements per MIL-STD-792. All certifications must be positive, unqualified, and traceable to the marking applied on each item.
Government quality assurance will be performed at the source, and the contractor's quality system is subject to evaluation and audit by government representatives. Subcontractor inspection requirements are also detailed, ensuring that all sub-tier suppliers meet the same rigorous standards.
**Packaging and Delivery**
Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance.
**Contracting Entity and Contact Information**
- **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Heather R. Jones, Telephone: 717-605-4866, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/04b1e2360a304c968c779f356422fb25/view)
**Procurement Type and Set-Aside**
This solicitation is a total small business set-aside, in accordance with applicable Department of Defense regulations. The award will be issued bilaterally, requiring the contractor’s written acceptance prior to execution. The order is certified for national defense under the Defense Priorities and Allocations System (DPAS), with a priority rating for emergency preparedness and energy program use.
**Special Considerations**
- Emergency Acquisition Flexibilities (EAF) apply.
- Past performance will be considered in the evaluation of offers.
- Access to drawings may require request and approval via SAM.gov and the listed point of contact.
- All waivers, deviations, and engineering change proposals must be submitted and approved via the Electronic Contractor Data Submission (ECDS) system.
- Mercury and mercury-containing compounds are strictly prohibited.
- Warranty of supplies is required for one year from the date of delivery.
**Constant Elements Throughout Contract Lifecycle**
Throughout the contract lifecycle, the requirements for traceability, certification, quality assurance, and compliance with specified standards and drawings will remain constant. The contractor must maintain rigorous documentation, submit all required certifications, and ensure that all materials and processes meet the contractually invoked specifications. Government inspection and acceptance procedures, as well as packaging and marking standards, will be enforced for every shipment.
**Summary for Contractors**
This opportunity is highly specialized and demands strict adherence to technical, quality, and traceability requirements. Contractors in the metal valve and pipe fitting manufacturing sector, particularly those with experience in Level I/SUBSAFE materials for naval applications, should carefully review the detailed specifications, quality assurance protocols, and certification requirements. The contract is suitable for small businesses with robust quality systems, proven past performance, and the capability to manage complex documentation and traceability processes. Interested parties should contact the primary contracting officer for further information and ensure timely submission of proposals and required documentation.