PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNE95
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of a Parts Kit for Ball Valves, specifically for 1/2 and 1/4 inch sizes. This kit is intended for use in critical shipboard systems, where the integrity and reliability of components are paramount due to the potential for catastrophic failure, serious injury, or loss of vital shipboard functions. As such, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control and certification procedures to ensure the correct and defect-free supply.
**Scope and Purpose**
The solicitation seeks qualified contractors to manufacture and deliver a parts kit comprising one ball (Find No. 9) and two matching seats (Find No. 11), in accordance with Naval Sea Systems Command Drawing 801-6408783 and related specifications. The ball must be fabricated from QQ-N-281, Class A, Form 1, Annealed material, while the seats are to be made from Torlon 4503, 4203, or 4203L (unfilled polyamide-imide) per Electric Boat Specification 4147. Certification of compliance is required for the seat material, and quantitative chemical and mechanical analysis is mandatory for the ball.
**Key Requirements and Deliverables**
- **Material and Certification:** All materials must be traceable to certification test reports, with unique traceability markings applied to each component. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and facilities must be available for audit.
- **Testing and Inspection:** Non-destructive testing certifications are required for weld repairs and production welds. Seat stack height measurements, surface waviness verification, and Teflon coating application must adhere to specified tolerances and standards. All data concerning material verification, traceability, and NDT certifications must be 100% inspected for completeness and legibility.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. Waivers and deviations require review and approval by the Contracting Officer.
- **Packaging and Marking:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Traceability markings must be permanent and not affect the form, fit, or function of the material.
- **Subcontractor Management:** The prime contractor is responsible for ensuring sub-tier suppliers meet all quality and traceability requirements, including periodic reviews and audits.
- **Special Considerations:** Mercury and mercury-containing compounds are strictly prohibited. The order is certified for national defense under the Defense Priorities and Allocations System (DPAS), and is subject to Emergency Acquisition Flexibilities (EAF).
**Contracting Entity and Contact Information**
- **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Location:** Mechanicsburg, PA
- **Primary Contact:** Heather R. Jones, Telephone: 717-605-4866, Email: [email protected]
**Classification and Procurement Details**
- **NAICS Code:** 332919 (Other Metal Valve and Pipe Fitting Manufacturing)
- **Product Service Code:** 4820
- **Procurement Type:** Solicitation
- **Set-Aside:** Total Small Business Set-Aside
- **Priority Rating:** DO/DX for national defense
- **Response Deadline:** November 26, 2026, 22:11
- **Notice Status:** Active
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/70d5341d793a41e78dbcfd35c12995f9/view)
**Constant Elements Throughout Contract Lifecycle**
- The requirement for traceability, certification, and compliance with invoked specifications and drawings will remain unchanged.
- Quality assurance, configuration control, and government inspection at source are integral and ongoing.
- The prohibition of mercury, adherence to DPAS priority rating, and use of WAWF for certification submission are fixed requirements.
- Subcontractor oversight and material control procedures are mandatory throughout the contract.
**Summary for Contractors**
This opportunity is highly specialized, requiring robust quality systems, strict material traceability, and comprehensive certification processes. Contractors must demonstrate experience in manufacturing critical safety items for naval applications, possess the ability to manage complex documentation and compliance requirements, and maintain readiness for government audits and inspections. The solicitation is a total small business set-aside, offering qualified small businesses the chance to support national defense priorities through the supply of essential shipboard valve components. Interested parties should review all technical specifications, quality assurance requirements, and submission protocols to ensure alignment with their capabilities and compliance infrastructure.