STEM, VALVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNE90

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QNE90) for the manufacture and supply of a "Stem, Valve" component, specifically for a size 2 1/2 Ball Valve. This procurement is classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered). The solicitation is active and open for responses until November 30, 2026. **Purpose and Scope** The primary purpose of this procurement is to acquire a critical shipboard component designated as SPECIAL EMPHASIS material, falling within both Level I and Scope of Certification (SOC) boundaries. The stem is intended for use in vital shipboard systems where material failure could result in catastrophic consequences, including personnel injury, loss of life, or loss of shipboard systems. As such, the procurement invokes stringent quality assurance and control procedures to ensure the correct material is received and installed. **Key Requirements and Objectives** - **Technical Specifications:** The stem must be manufactured in accordance with Naval Sea Systems Command Drawing 845-7108792, Item 3, with modifications as specified in the solicitation. The material required is ASTM-B150, Alloy C63200, Temper TQ50 or TQ55. - **Oxygen Cleaning:** The component must be cleaned, tested, packaged, and labeled by trained personnel following MIL-STD-1330 standards. Navy Source Certification is required prior to O2 cleaning. - **Testing and Certification:** Quantitative chemical and mechanical analysis is mandatory. Certifications for non-destructive tests (NDT) on weld repairs and/or production welds must be provided, referencing applicable fabrication specifications. - **Inspection:** O-ring grooves, sealing surfaces, and threads must be inspected per contractually invoked drawings/specifications, with thread inspection conforming to FED-STD-H28 or ASME B1 series. Higher-level inspection is required, and Government Quality Assurance will be performed at the source. - **Traceability:** All materials must be traceable to certification test reports via unique markings (heat-lot or heat-treat numbers), maintained through all process operations, including subcontracted work. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Compliance and Documentation:** Certificates of compliance must be submitted, showing traceability to individual item markings and confirming full compliance with all specifications and requirements. Electronic signatures are permitted, provided they are controlled and unique to the signer. - **Quality System:** Contractors must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, or ISO-17025. Quality system documentation must be available for review by the Contracting Officer. - **Subcontractor Management:** Prime contractors are responsible for assessing, auditing, and ensuring sub-tier suppliers' capability and compliance with quality requirements. Government reserves the right to inspect supplies/services at subcontractor facilities. - **Material Handling and Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Mercury and mercury-containing compounds are strictly prohibited. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Heather R. Jones, Telephone: 717-605-4866, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/c93fdf71c5814df7b122310c46af96cb/view) **Procurement Type and Special Considerations** - **Solicitation Type:** Fixed-price contract, issued bilaterally, requiring written contractor acceptance prior to execution. - **Set-Aside:** This is a total small business set-aside, encouraging participation from qualified small businesses. - **Priority Rating:** The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its importance for emergency preparedness and energy program use. - **Emergency Acquisition Flexibilities:** The requirement is issued under Emergency Acquisition Flexibilities (EAF), allowing for expedited processes. - **Payment Instructions:** Wide Area Workflow (WAWF) is required for certification data submission and payment processing. No material may be shipped prior to receipt of acceptance. **Constant Elements Throughout Contract Lifecycle** - The requirement for rigorous quality assurance, traceability, and compliance documentation will persist throughout the contract. - Configuration control, including the submission and approval of ECPs, remains a constant obligation. - The prohibition of mercury and the requirement for oxygen cleaning and Navy Source Certification are enduring requirements. - Government inspection and acceptance procedures, including the use of WAWF and notification protocols, will be maintained for each shipment. - The contract’s classification as SPECIAL EMPHASIS material and its critical safety item (CSI) status will continue to dictate heightened oversight and control. **Summary for Contractors** This opportunity is highly specialized and demands strict adherence to technical, quality, and traceability requirements. Contractors must demonstrate robust quality systems, experience with critical shipboard components, and the ability to manage complex certification and inspection processes. The contract is suitable for small businesses with proven capabilities in metal valve and pipe fitting manufacturing, particularly those familiar with Navy standards and emergency acquisition protocols. Interested parties should review the full solicitation and ensure compliance with all requirements before submitting a response. For further information or to request access to drawings and documents, contractors should contact Heather R. Jones at the provided email or phone number and refer to the solicitation page on SAM.gov.