Fabrication
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
SLAC Natl Accel Lab -DOE Contractor
Contract Value
Not provided
Codes & Classification
Solicitation Number
SLAC_368560_Fabrication
NAICS
-
Classification Code
AJ12
Additional Details
Documents5
SLAC National Accelerator Laboratory, operated by Stanford University for the U.S. Department of Energy (DOE), has issued a solicitation (Procurement Identifier: SLAC_368560_Fabrication) for the fabrication of a range of ultra-high vacuum (UHV) components and related hardware. This procurement is managed under SLAC’s DOE-approved purchasing system, which, while not directly subject to the Federal Acquisition Regulations (FAR), is still governed by certain federal laws, executive orders, and DOE contract requirements.
**Purpose and Scope:**
The primary objective of this solicitation is to source the fabrication and delivery of specialized UHV components required for SLAC’s scientific and research operations. The scope encompasses the production of various precision-machined parts, including but not limited to clamps, tubes, plates, mounts, bases, retainers, and diode blocks, each specified by unique drawing numbers and quantities. The deliverables are strictly for product supply; no on-site services are permitted under this contract.
**Key Requirements and Deliverables:**
- **Component List:** The solicitation details specific part numbers and quantities, such as DSG-000110672 (1 unit), DSG-000102297 Clamp Diamond Ring (18 units), DSG-000103435 Tube, Collim Lid (38 units), DSG-000103585 Plate, Identifying Collim (17 units), DSG-000103609 Mt, Collimator (19 units), and several others, totaling over 200 fabricated items.
- **Technical Specifications:** All components must meet UHV standards. Notably:
- EDM (Electrical Discharge Machining) is prohibited unless prior approval is obtained from SLAC.
- The use of sanding discs, grinding wheels, abrasives, sulfur-containing cutting fluids, and silicone lubricants is strictly forbidden.
- All parts must be cleaned before welding, with exceptions noted for certain parts to be cleaned at SLAC.
- Specific parts (DSG-000098971, DSG-000106241, DSG-000106252, DSG-000106275) require electropolishing.
- Dimensional inspection reports must be provided for all fabricated items.
- For part DSG-000102297, helicoils are not to be installed.
- **Documentation and Compliance:** Bidders must complete and submit the Representations & Certifications Rider, and confirm acceptance of SLAC’s Fixed Price Commercial Supplies-Services Terms and Conditions (August 2023) and the General Terms and Conditions Supplemental Rider (Rev. August 2026).
- **Regulatory Requirements:** The Buy American Act (BAA) applies to items with a unit price exceeding $15,000. All subcontractors must be registered in the System for Award Management (SAM.gov). Proposals should include Harmonized Tariff Schedule (HTS) codes and Export Control Classification Numbers (ECCN) where applicable.
**Procurement Process and Evaluation:**
- **Type:** This is a fixed-price procurement for commercial supplies.
- **Selection Method:** Source selection will be based on the Lowest Price Technically Acceptable (LPTA) method.
- **Proposal Submission:** Bidders are required to submit their best and final offers, including price and lead time, by close of business on October 23, 2026. All addenda must be acknowledged in the proposal submission.
- **Payment and Freight Terms:** Payment terms are NET-30; SLAC does not permit advance or prepayments. Freight terms are FOB Destination, Prepaid and Add. For foreign vendors, shipments must be made CIP SLAC, Menlo Park, with duty unpaid.
**Contracting Entity and Contact Information:**
- **Contracting Entity:** SLAC National Accelerator Laboratory (DOE Contractor)
- **Location:** 2575 Sand Hill Road, Menlo Park, California, 94025, USA
- **Product Service Code:** AJ12
- **Primary Contacts:**
- Marissa Tanomrat, Procurement Commodities Team, [email protected]
- Katherine Jill A. Coh, [email protected], 650-926-2770
**Additional Considerations:**
- Bidders are encouraged to offer discounts applicable to academic, ICPT, GSA, or government institutions, and to provide links to published price lists for price substantiation.
- Proprietary or confidential information in proposals should be clearly marked.
- The opportunity is also posted on SAM.gov (Opportunity ID: f6087bbe83c44b18a82e7a0884e7a7c8), with five attachments available for review.
**Summary for Contractors:**
This solicitation represents a significant opportunity for qualified fabricators with experience in UHV component manufacturing and strict adherence to specialized machining and cleaning protocols. Contractors must be able to demonstrate technical capability, regulatory compliance, and competitive pricing. The contract will be governed by SLAC’s fixed price terms and DOE requirements, with a clear emphasis on quality, documentation, and timely delivery. Interested parties should review all technical drawings and requirements, ensure all addenda are acknowledged, and submit comprehensive proposals by the specified deadline.
For further details or clarifications, prospective bidders are encouraged to contact Marissa Tanomrat at [email protected].