30--CYLINDER ASSEMBLY,A
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
DLA AVIATION AT PHILADELPHIA, PA
Contract Value
Not provided
Codes & Classification
Solicitation Number
SPRPA126RYD25
NAICS
333613 - Mechanical Power Transmission Equipment Manufacturing
Classification Code
3040
Additional Details
The Defense Logistics Agency (DLA) Aviation at Philadelphia, PA, a component of the U.S. Department of Defense, has issued a solicitation (Procurement Identifier: SPRPA126RYD25) for the manufacture and supply of a Cylinder Assembly, classified under Product Service Code 3040 (Miscellaneous Power Transmission Equipment) and NAICS Code 333613 (Mechanical Power Transmission Equipment Manufacturing). This procurement is designated as a Critical Application Item (CAI) and is integral to crucial shipboard systems that enable the launch and/or recovery of aircraft. The failure of this component could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard and aircraft systems, underscoring the stringent quality and control requirements associated with this solicitation.
**Purpose, Scope, and Intended Outcomes:**
The primary objective of this procurement is to acquire Cylinder Assemblies that meet the exacting standards required for use in Aircraft Launch and Recovery Equipment (ALRE) systems aboard naval vessels. The assemblies must be manufactured, tested, and inspected in strict accordance with NAWC Lakehurst drawing number 514762-8, Revision AJ, and all referenced specifications and drawings. The intended outcome is to ensure the reliable and safe operation of shipboard aircraft handling systems, with zero tolerance for material or manufacturing defects.
**Key Requirements, Objectives, and Deliverables:**
- **Quality and Compliance:** The contractor must adhere to ISO 9001 or higher quality management standards. All manufacturing and inspection processes must be thoroughly documented, and any changes post-First Article or Production Lot Testing require approval from the Basic Design Engineering activity.
- **Traceability and Documentation:** All raw material certifications, including castings and forgings, must be maintained for a minimum of ten years, with clear traceability to the customer and contract number. All records related to ALRE CAI manufacture and inspection/testing must be provided to the ALRE Cognizant Technical Authority and retained for at least seven years.
- **First Article and Production Lot Testing:**
- First Article Testing (FAT) is mandatory unless a waiver is granted based on prior approved production. FAT includes dimensional, hardness, and compliance tests, with the government reserving the right to witness all testing. The contractor must notify the government at least 14 days prior to testing.
- Production Lot Testing is also required, with random sample selection by the government inspector. All critical, major, and minor characteristics must be inspected and documented, and samples must be shipped to the designated test facility with advance notification.
- **Special Processes and Inspections:**
- Critical manufacturing processes include heat treat, cadmium plating, engineering chrome plating, and nickel chrome plating.
- Special inspection requirements include magnetic particle inspection, surface inspection, penetrant inspection, high shock test, and mechanical vibration test. All Nondestructive Testing (NDT) must be performed by NADCAP-accredited or ISO 17025-accredited laboratories.
- **Packaging and Marking:** Packaging must comply with MIL-STD-2073, and all items must be marked per MIL-STD-130. Inspection and certification data must be included with both First Article and Production Lot Test units, clearly marked on the packaging.
- **Deliverables:** Each cylinder assembly must be delivered with two spare parts kits (P/N 4970043), and specific testing (shock, vibration, cycle) must be performed per the referenced drawings. Detailed inspection, material property, plating, and assembly requirements are specified for each deliverable.
**Contracting Entity and Contact Information:**
- **Entity:** DLA Aviation at Philadelphia, PA (Federal Office, Organization Key: 500044424)
- **Department/Agency:** Department of Defense, Defense Logistics Agency
- **Primary Contact:** Kenneth Lauber, Telephone: 213-737-3962, Email: [email protected]
**Procurement Type, Set-Aside, and Special Considerations:**
- **Procurement Type:** This is a formal solicitation for a fixed-price contract.
- **Set-Aside Requirements:** The components are classified as "critical," requiring engineering source approval by the Naval Air Systems Command. Only companies that have submitted and been approved as sources are eligible for award, though any company may submit a source approval request as outlined in the solicitation.
- **Special Considerations:**
- Drawings are not available with the solicitation; all post-award requests must be submitted through the NAVSUP WSS Vendor Portal.
- The government will not provide special tooling, fixtures, or test equipment; these are the sole responsibility of the contractor.
- Strict adherence to notification and documentation procedures is required for all inspections and testing.
- Alternate offers may be considered if the offeror can demonstrate recent, identical, government-accepted production using the same facilities and processes.
**Constant Elements Over Contract Lifecycle:**
- The criticality of the item and the associated quality assurance, traceability, and documentation requirements will remain unchanged throughout the contract.
- All manufacturing, inspection, and testing processes must be performed in accordance with the specified drawings and standards, with no deviation permitted without prior government approval.
- The requirement for source approval and the maintenance of comprehensive records for extended periods are enduring obligations.
**Summary for Contractors:**
This solicitation represents a highly specialized and controlled procurement for a critical shipboard component. Contractors must possess robust quality management systems, experience with complex mechanical assemblies, and the capability to perform or manage all required special processes and inspections. Only those with prior source approval or the ability to obtain such approval will be considered. The contract demands meticulous documentation, traceability, and compliance with all technical and quality requirements. Interested parties should carefully review the solicitation, ensure they can meet all requirements, and direct any proposals or inquiries to the designated contracting officer.
For further details and to access the full solicitation, visit the official notice at: https://sam.gov/opp/a7820788897a4de98677e27965363184/view