VALVE ASSEMBLY,MANI

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010427RNA02

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a Valve Assembly, Mani, under procurement identifier N0010427RNA02. This requirement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its relevance to contractors specializing in metal valve and pipe fitting production for critical applications. **Purpose and Scope** The primary purpose of this procurement is to supply Lubrication Distribution Valve Assemblies for use in crucial shipboard systems. The assemblies are designated as SPECIAL EMPHASIS material (Level I/SUBSAFE/DSS-SOC/TRIPER), reflecting their criticality to ship safety and operational integrity. The failure or malfunction of these components could result in catastrophic outcomes, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent quality assurance and traceability requirements to ensure the receipt of correct, defect-free material. **Key Requirements and Objectives** Contractors are required to manufacture the valve assemblies in strict accordance with NAVSEA drawing 6985455, part number 642925-A1, and associated engineering referrals. Specific material certifications are mandated for key parts: - Valve Body (Part Number 642925-1): QQ-N-281, Class A, Form 1 - Needle Valve (Part Number 642925-3): ASTM-B150 Alloy C63200 Temper TQ50 or TQ55 Each assembly must undergo hydrostatic testing (per General Note 7001 of drawing 6985455) with zero leakage permitted. Non-destructive testing is required for weld repairs and production welds, with acceptance criteria defined by applicable fabrication specifications. Pressure and test time tolerances are specified, with detailed requirements for tests below 100 PSIG, up to 2500 PSIG, and above 2500 PSIG. O-ring grooves and sealing surfaces must be inspected per contractually invoked standards, and repairs are subject to approval if they exceed specified limits. Thread inspection must comply with FED-STD-H28 series, with System 21 as the minimum requirement unless otherwise specified. All internal threads must be formed by cutting; cold forming is not acceptable. Component identification is required, with CID number 887365106 to be affixed to each assembly via a nameplate or identification plate per MIL-DTL-15024. No assembly may be shipped without this identification. Welding and brazing must adhere to NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248), with procedures and qualification data submitted for review and approval prior to any welding or brazing activities. **Quality Assurance and Traceability** A robust quality system is required, compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, or ISO-17025. The contractor’s quality system and procedures are subject to government review and audit throughout the contract lifecycle. Traceability is paramount: material certification reports must be linked to unique traceability markings on the material, ensuring direct traceability to chemical composition and mechanical properties. All raw materials must be marked and segregated, and traceability must be maintained through all process operations, including subcontracted activities. Certificates of compliance must be submitted, certifying full adherence to all specifications and requirements, and must show traceability to individual item markings. Electronic signatures are permitted, provided they are uniquely controlled and authenticated. **Inspection and Acceptance** Government Quality Assurance will be performed at the source, and the place of performance may not be changed without authorization. Contractors must promptly notify the appropriate government representative or DCMA office upon receipt of the order to facilitate inspection planning. Final inspection includes material sampling for form, fit, and function, with lot acceptance based on zero defects. All data concerning material verification, traceability, and NDT certifications must be 100% inspected for completeness and legibility. **Packaging and Delivery** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No material may be shipped before receipt of acceptance. **Contracting Entity and Contact Information** - Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - Department: Department of Defense, Department of the Navy - Primary Contact: Zachary R. Morrill, Telephone: 717-605-1552, Email: [email protected] - Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/360f06e140b94d5fbb004998c386093d/view) **Procurement Type and Set-Aside** This solicitation is a total small business set-aside, pursuant to Emergency Acquisition Flexibilities (EAF). The resultant contract will be issued bilaterally, requiring written acceptance by the contractor prior to execution. The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense and emergency preparedness. **Special Considerations** - Contractors must maintain configuration control and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - Mercury and mercury-containing compounds are strictly prohibited. - All waivers and deviations require review and approval by the Contracting Officer. - Subcontractor quality assurance and traceability requirements must be flowed down to all sub-tier suppliers. **Constant Elements Over Contract Lifecycle** Throughout the contract, the requirements for quality assurance, traceability, configuration control, and compliance with NAVSEA and federal standards will remain unchanged. The critical safety designation and associated control procedures will persist, ensuring the integrity and reliability of the valve assemblies for shipboard use. **Summary for Contractors** This opportunity is suited for small businesses with proven capabilities in manufacturing high-integrity metal valve assemblies for defense applications, possessing robust quality systems, and experience with NAVSEA standards and traceability requirements. The contract demands meticulous attention to material certification, testing, and documentation, with strict government oversight and compliance obligations. Interested contractors should review the full solicitation and ensure alignment with the technical, quality, and traceability requirements before responding. For further information or to request access to drawings, contact the primary POC listed above and refer to the solicitation page on SAM.gov.