61--CONTROLLER,ELECTRIC, IN REPAIR/MODIFICATION OF
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0038327QPA04
NAICS
335312 - Motor and Generator Manufacturing
Classification Code
6110
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support, has issued a solicitation for the repair and modification of a critical shipboard component: the Electric Controller, NSN 6110-01-703-0671, Part Number 2056AS4000-G05. This procurement is classified under NAICS Code 335312 (Motor and Generator Manufacturing) and Product Service Code 6110, reflecting its focus on essential electrical equipment for naval operations.
**Purpose and Scope**
The primary objective of this solicitation is to ensure the reliable repair, overhaul, inspection, and certification of Electric Controllers used in crucial shipboard systems that enable the launch and recovery of aircraft. The material is designated as a Critical Safety Item (CSI), underscoring its importance to personnel safety and mission success. The scope encompasses restoring these units to a Ready for Issue (RFI) condition, adhering strictly to the latest technical specifications, engineering orders, and approved repair manuals. The contractor is responsible for all aspects of the repair process, including supply of parts and materials, unless otherwise specified as Government Furnished Material.
**Key Requirements and Deliverables**
- **Repair Turnaround Time (RTAT):** The contractor must complete repairs within 550 days from receipt of the asset, as tracked in the Commercial Asset Visibility (CAV) system. Accurate reporting in CAV is mandatory within five business days of asset receipt.
- **Throughput Constraint:** Contractors must specify their monthly repair capacity for each NSN, with no constraint if left blank.
- **Induction Expiration:** Assets received more than 365 days after contract award require bilateral agreement for repair authorization.
- **Quality Assurance:** A robust quality management system conforming to ISO 9001/SAE AS9100 is required. Calibration systems must meet ANSI/NCSL Z540.3 or equivalent standards. All repairs are subject to 100% inspection of critical and major characteristics, with specific sampling rates for minor features as per ANSI Z1.4.
- **Configuration Management:** Contractors must maintain a configuration management plan in accordance with NAVSUP WSS requirements.
- **Marking and Traceability:** All items must be marked per MIL-STD-130, with non-permanent markings for traceability. ALRE CSI parts require certification and marking with a Material Identification Code (MIC) as directed by NAWCADLKE QA.
- **Inspection and Certification:** Interim and final inspections are required, with advance notification to NAWCADLKE QA and the PCO. The contractor must provide facilities, equipment, and personnel to support these inspections, including all necessary gauges, tools, and rigging.
- **Documentation:** Contractors must submit inspection and test reports, overhaul procedures, and records of all approved variations. All records related to CSI/CAI manufacture and inspection must be maintained for seven years.
- **Parts and Materials:** Only new parts and materials are authorized unless written approval is obtained from the PCO. Cannibalization is not permitted without explicit approval.
- **Non-Destructive Testing (NDT):** NDT must be performed by NADCAP-accredited or ISO 17025-accredited laboratories, with certificates bearing appropriate accreditation symbols.
- **Storage:** Proper enclosed warehouse storage is required for both items awaiting repair and repaired assets.
**Special Considerations**
- **Critical Safety Item (CSI):** Due to the high risk associated with incorrect or defective material, special control procedures are invoked. Only companies with engineering source approval from Naval Air Systems Command are eligible for award. However, new sources may submit a Source Approval Request as outlined in the solicitation.
- **Government Inspection:** Representatives from NAWCADLKE and DCMA may conduct QA surveillance and must be notified in advance for both interim and final inspections.
- **Warranty:** A 12-month warranty is required, with defects to be reported within 60 days of discovery.
- **Payment and Workflow:** Wide Area Workflow (WAWF) is used for payment processing, and Workflow Pro (WFP) Mod Assist Module is mandatory.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support, Department of the Navy, Department of Defense
- **Primary Contact:** Bridget M. Murphy, Phone: 215-697-5047, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/a6ccde0ab48c4a92b19519af34a76df3/view)
- **Location of Repair:** Northrop Grumman Systems Corporation, 7301 Sykesville Rd, Sykesville, MD 21784-7404 (CAGE Code 04804)
**Procurement Type and Status**
This is an active solicitation for repair/modification services, with no explicit set-aside requirements or production lot special tests. Early and incremental deliveries are accepted and preferred. All contractual documents are considered issued upon electronic transmission or mailing.
**Constant Elements Throughout Contract Lifecycle**
- Strict adherence to technical specifications, engineering orders, and approved repair manuals
- Maintenance of quality and configuration management systems
- Compliance with inspection, certification, and marking requirements
- Responsibility for all parts, materials, and tooling
- Ongoing communication and coordination with government QA representatives
- Preservation of records for seven years
**Summary for Contractors**
This opportunity is highly specialized, requiring proven expertise in the repair and overhaul of critical shipboard electrical controllers, robust quality assurance systems, and the ability to support rigorous government inspection and certification processes. Contractors must be capable of managing all aspects of the repair lifecycle, from receipt and storage to final inspection and documentation, while maintaining compliance with stringent safety and quality standards. Only those with prior engineering source approval or those able to secure such approval will be considered for award. Interested parties should review the full solicitation and ensure alignment with all requirements before responding.
Response deadline: November 23, 2026, 20:11.