Unmanned Drone Platform, hardware, and training

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP FLT LOG CTR NORFOLK

Contract Value

Not provided

Codes & Classification
Solicitation Number

A033933

NAICS

-

Classification Code

-

Additional Details
Set Aside

None

Place of Performance

Stennis Space Center, Mississippi, UNITED STATES

SourceSAM
Documents1
The Department of the Navy, through the Naval Supply Systems Command Fleet Logistics Center Norfolk (NAVSUP FLT LOG CTR NORFOLK), has issued a Sources Sought notice seeking industry input for the provision of advanced unmanned drone platforms, associated hardware, and comprehensive operator training. The procurement is intended to support operations at Stennis Space Center, Mississippi, and is aimed at identifying capable vendors who can deliver a robust, field-deployable drone system tailored for tactical reconnaissance and terminal guidance missions. The scope of this requirement encompasses the delivery of fifteen (15) 10-inch Digital FPV unmanned drone systems, two (2) Mobile Ground Control Stations (GCS), a suite of peripheral operational hardware, connectivity systems, field support equipment, and a five-day on-site Operator and Instructor Training Course. The training will be conducted at Stennis Space Center, ensuring end-users are proficient in both operation and instruction of the system. Key technical requirements for the drone platform include: - Airframe & Propulsion: Each drone must be a 10-inch rotary-wing strike platform capable of carrying a minimum payload of 2.5 kg, with cruise speeds of at least 40 mph and maximum burst speeds of 105 mph. - Endurance & Operational Range: The system must provide a minimum of 40 minutes flight time under standard payload, with a flight range of at least 35 km and RF command/control datalink capability up to 90 km. - Sensors & Vision Pipeline: Factory-integrated dual Electro-Optical and Infrared (EO/IR) camera payload optimized for both daylight and low-light/night tactical reconnaissance and terminal guidance. - Autonomous Terminal Guidance (ATG): Integrated onboard computer-vision AI terminal guidance engine capable of autonomous target acquisition, terminal lock-on, and target engagement in GNSS-denied, heavily jammed, or lost-link conditions. - Encryption & RF Architecture: Digital transmission architecture operating within the 4.9–5.9 GHz band utilizing AES-256 encryption, open MAVLink telemetry protocol, and full compatibility with the MANTRAS encrypted aerial mesh network. The Mobile GCS units must be expeditionary, built into a 30L backpack form factor, and capable of rapid deployment (fully operational in under 3 minutes). Each GCS must include a 100-meter displaced RF link cable and a RolaTube deployable mast system, allowing operators to decouple the RF transmission node and launch site from the concealed operator control position, thereby enhancing operational security against RF direction-finding and counter-battery targeting. Additional deliverables include: - Sunlight-readable rugged tactical tablets with native ATAK and MANTRAS Command Hub integration, supporting full Cursor-on-Target (CoT) telemetry broadcast and live digital video distribution across tactical mesh networks. - Two (2) GCS auxiliary battery packs with integrated charging circuitry and multi-source input capabilities for continuous field operational power. - Six (6) pairs of high-resolution digital FPV goggles configured for zero-latency operator video feeds, tactical audio, and head tracking/on-screen display (OSD) telemetry. - Two (2) Starlink connectivity kits integrated with GCS hardware to support wide-area network backhaul and remote common operational picture (COP) dissemination. Compliance and certification are critical: all hardware and firmware must fully comply with NDAA procurement standards and be actively included on the DoD Blue UAS Cleared List. Components must be free of unauthorized foreign microelectronics or unvetted software stacks. The place of performance is Stennis Space Center, Mississippi (MS), United States. The contracting entity is NAVSUP FLT LOG CTR NORFOLK, a federal office under the Department of Defense, Department of the Navy. The primary point of contact for this notice is Matthew Pizzarelli, who can be reached at [email protected]. This notice is a Sources Sought, not a solicitation, and is intended to gather capability statements from interested vendors. Contractors are encouraged to review the detailed requirements and submit a capability statement demonstrating their ability to meet the outlined specifications. The opportunity remains active, with responses due by October 13, 2026. For further information and to access the official notice, visit: https://sam.gov/opp/b5417953a74b40a4ad011dfb3deb8912/view Contractors evaluating this opportunity should ensure their solutions align with the technical, operational, and compliance requirements specified, as these elements will remain constant throughout the contract lifecycle.