SEAT,ACCESS COVER
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNE42
NAICS
332510 - Hardware Manufacturing
Classification Code
5340
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QNE42) for the supply of a SEAT, ACCESS COVER, classified under Product Service Code 5340 (Hardware, Commercial). This procurement is a total small business set-aside, inviting qualified small business contractors to participate.
**Purpose and Scope**
The SEAT, ACCESS COVER is a critical component intended for use in vital shipboard systems. Its correct manufacture and quality are paramount, as any defect or deviation could result in catastrophic failure, serious injury, loss of life, or compromise of essential shipboard operations. Accordingly, this item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control procedures to ensure the delivery of compliant and reliable material.
**Key Requirements and Objectives**
The Access Cover Seat must be manufactured in strict accordance with Naval Sea Systems Command drawings 7016077 and ER7016077B66, item 114, with specific dimensional and material requirements. Notably, the seat must be produced to a nominal dimension of 1.582 ± 0.005 inches, superseding the stack height requirement in ER7016077B66. The material specified is MC903 (Type 6 cast nylon produced with polyepsilon caprolactam by direct polymerization), or an equivalent, conforming to Electric Boat Division Specification 2000. Detailed physical and mechanical properties are outlined, including melting point, viscosity, specific gravity, dimensional change, tensile impact, yield stress, compressive strength, water absorption, and hardness, with associated ASTM test methods.
Contractors must perform visual inspections on finished seats, adhering to acceptance criteria for critical surfaces as defined in CSD167 via the Electronic Contractor Data Submission (ECDS) system. A Certificate of Compliance is required, certifying that all items meet the procurement document’s requirements, including specifications and drawings. Configuration control is mandatory, with any waivers, deviations, or engineering changes subject to review and approval by the Contracting Officer.
**Quality Assurance and Traceability**
A robust quality system is required, compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 for calibration systems. The contractor’s quality system and products are subject to government evaluation, verification, and audit throughout the contract lifecycle. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures to the Procurement Contracting Officer (PCO) prior to award, unless already on file.
Traceability is a critical aspect; each seat must be permanently marked (except Teflon seats) on the outer cylindrical surface, maintaining direct traceability to material certification data. Certification test reports must accompany each heat/lot/batch, detailing specification, class, form, grade, type, process, and composition. Material handling procedures must ensure segregation, positive control, and restoration of traceability markings throughout manufacturing and subcontracted operations.
**Inspection and Acceptance**
Government Quality Assurance will be performed at the source, and the place of performance may not be changed without authorization. Subcontractor inspection requirements are extensive, with the government reserving the right to inspect supplies or services not manufactured within the contractor’s facility. Receiving inspection must verify traceability, completeness, and compliance of certification test reports. Nonconforming products must be controlled, reported, and records maintained for government review.
Final inspection requires sampling from each heat/lot or batch, and no material may be shipped prior to government acceptance. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance before each shipment, via Wide Area Work Flow (WAWF), with specific instructions for notification and documentation.
**Packaging and Marking**
Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. Mercury and mercury-containing compounds are strictly prohibited in the supplied hardware.
**Contracting Entity and Contact Information**
- Contracting Entity: NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- Department: Department of Defense, Department of the Navy
- NAICS Code: 332510 (Hardware Manufacturing, 2022)
- Primary Contact: Heather R. Jones, Telephone: 717-605-4866, Email: [email protected]
- Notice URL: [SAM.gov Opportunity](https://sam.gov/opp/ce3418f82c044032a05dfdfac7bcaa3a/view)
- Response Deadline: February 11, 2026, 21:11
**Procurement Type and Special Considerations**
This is a fixed-price solicitation, issued under Emergency Acquisition Flexibilities (EAF), and is a total small business set-aside. The award will be bilateral, requiring written acceptance by the contractor. The contract is certified for national defense under the Defense Priorities and Allocations System (DPAS), with a DO/DX priority rating. Past performance will be considered in the evaluation of offers.
**Constant Elements Throughout Contract Lifecycle**
- Strict adherence to technical specifications, drawings, and quality assurance requirements
- Maintenance of traceability and certification for all materials
- Government inspection and acceptance procedures
- Compliance with packaging, marking, and mercury prohibition requirements
- Submission of certification data and documentation via WAWF
- Configuration control and approval of any waivers, deviations, or engineering changes
**Summary for Contractors**
Contractors considering this opportunity must possess capabilities in precision manufacturing, quality assurance, traceability management, and compliance with rigorous government standards. The solicitation demands a high level of technical and quality control, with extensive documentation and traceability requirements. Only firms with established quality systems, experience in critical shipboard hardware, and the ability to meet stringent government inspection and certification protocols should pursue this opportunity.
For further information or to request access to drawings and documents, contractors should contact the primary point of contact listed above and refer to the solicitation page on SAM.gov.