CFA-686 Carbon-based Fuels Capability CO2 Compressor Design/Build
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
BATTELLE ENERGY ALLIANCE–DOE CNTR
Contract Value
Not provided
Codes & Classification
Solicitation Number
INL-26-055
NAICS
-
Classification Code
-
Additional Details
Documents2
Battelle Energy Alliance, LLC (BEA), the Management & Operating Contractor for the U.S. Department of Energy’s Idaho National Laboratory (INL), has issued a Sources Sought notice (Procurement Identifier: INL-26-055) seeking Expressions of Interest (EOI) from qualified firms for the design, fabrication, testing, and delivery of a specialized CO2 compressor. This procurement supports the Central Facilities Area (CFA) Carbon-based Fuels Capability (CFA-686) at INL, located in Idaho Falls, Idaho.
The primary objective of this procurement is to secure a contractor capable of delivering a turnkey CO2 compressor system that will compress CO2 from a combustor unit into a storage vessel, subsequently supplying gas to downstream users. The compressor will be housed within a protected shipping container and is intended for nearly continuous operation under demanding conditions. The successful contractor will be responsible for the complete design/build process, including engineering documentation, fabrication, testing, and delivery to INL.
Key technical requirements for the compressor package include:
- Oil-free, liquid-cooled, fixed-speed, electric motor-driven compressor.
- Inlet conditions: 50–100°F at 0.14–2 psig; outlet conditions: 1,400 psig, 66.1 scfm, and 150°F.
- All components must fit within a high cube shipping container (interior: 19'6" L x 7'9" W x 8'10" H), mounted on a structural frame fabricated per AISC standards, with welding in accordance with AWS D1.1.
- Any pressure vessels must comply with ASME Section VIII, Division 1, and be National Board stamped and registered.
- The compressor must handle a gas stream of approximately 99% CO2 with trace contaminants (nitrogen, oxygen, water vapor, carbon monoxide, nitrogen oxides, sulfur oxides, hydrocarbons, hydrogen sulfide, and hydrogen chloride).
- The system must operate reliably at an altitude of approximately 4,938 ft, with ambient temperatures ranging from 41°F to 104°F and humidity from 0 to 100%.
- The package must include a UL-508A listed control panel with instrumentation, alarms (e.g., low discharge pressure, motor failure), data logging, emergency shutoff, and appropriate cooling (inter-coolers/after-coolers) to maintain outlet temperature at or below 150°F.
- A stainless steel drip pan sized to contain at least 1.5 times the volume of any fluids in the compressor is required.
The procurement process will follow a two-step approach. This Sources Sought notice is the initial step to identify interested and qualified vendors. Respondents deemed qualified by BEA may be invited to submit a detailed technical and price proposal in response to a forthcoming Request for Proposal (RFP). The contract will be awarded as a firm-fixed price agreement. The anticipated project schedule, measured from receipt of order (ARO), includes: Engineering Documentation Report (3 weeks), shop fabrication drawings (4 weeks), complete shop fabrication (40 weeks), and compressor delivery to INL (3 weeks).
Interested firms must demonstrate:
- Experience in designing and fabricating oil-free, liquid-cooled CO2 or industrial gas compressor packages.
- Proficiency with ASME Section VIII, Division 1 pressure vessel design and structural fabrication per AISC and AWS D1.1.
- Ability to meet the outlined design/build schedule.
- Capability to integrate all system components within the specified shipping container footprint.
- A comprehensive plan for inspection, examination, and testing, including non-destructive examination, operational testing, and a 10-hour continuous reliability test.
- Commitment to maintaining a written Quality Assurance Plan based on a recognized national consensus code (e.g., ANSI/ASME ISO-9000).
- Ability to provide Operations & Maintenance documentation, a recommended spare parts list, and field support for startup and commissioning.
Responses are limited to five pages and must be submitted to Chase Egbert ([email protected]) by close of business on October 16, 2026. Only those firms determined to be potentially qualified will receive the RFP. The selection decision is anticipated in November 2026.
For further information or technical questions, interested parties may contact Project Manager Ben Bryson ([email protected]) or Project Engineer Chris Dudley ([email protected]). All technical questions must be submitted in writing via email.
This opportunity is classified under the Department of Energy, with BEA acting as the federal contracting entity. The place of performance is Idaho Falls, Idaho, United States. The notice is currently active and further details, including attachments, can be accessed via the official SAM.gov opportunity page (Opportunity ID: b326b538f0d647839a829894ac584cb2).
Contractors with relevant experience in industrial compressor systems, pressure vessel fabrication, and integrated package delivery are encouraged to review the requirements and consider submitting an expression of interest.