CO NP ROMO 407(1) Holzwarth Culvert

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

6982AF CENTRAL FEDERAL LANDS DIVISI

Contract Value

Not provided

Codes & Classification
Solicitation Number

6982AF27B000004

NAICS

237310 - Highway, Street, and Bridge Construction

Classification Code

Y1LB

Additional Details
Set Aside

NONE

Place of Performance

Grand Lake, Colorado, UNITED STATES

SourceSAM
The Federal Highway Administration (FHWA), under the Department of Transportation, has issued a solicitation for the Holzwarth Culvert Replacement Project (Project Number: CO FTNP ROMO 407(1)), located within Rocky Mountain National Park, approximately nine miles north of Grand Lake, Colorado. This procurement seeks qualified contractors to undertake the replacement of the existing Holzwarth Culvert (Structure No. 1520-029S), a six-barrel corrugated metal arch pipe culvert, with a new steel girder bridge. The project site is situated along US Highway 34 at an elevation of 8,900 feet and serves as a critical access point to the Holzwarth Historic Site, employee housing, and recreational areas managed by the National Park Service and Forest Service. The primary objective of this project is to mitigate the risk of future roadway damage and flooding by upgrading the deficient culvert structure, thereby ensuring continued and reliable access to key park facilities and resources. The scope of work encompasses the removal of the existing culvert, construction of a modular steel vehicular bridge (10 feet wide by 48 feet long) with a cast-in-place concrete deck, installation of new bridge abutments supported by micropiles, and implementation of temporary stream diversion and riprap for environmental protection. Additional tasks include the placement of new aggregate roadway surfacing, relocation of an existing electrical line, and the repositioning of historic head gates onto a new concrete slab. Site access presents logistical challenges, as the location is reachable on foot approximately a quarter mile beyond a locked gate at the south end of the Holzwarth Historic Site Parking Lot, via the Holzwarth Culvert Access Road. This access road is approximately 13 feet wide with tight turns, necessitating temporary widening to prevent truck off-tracking onto sensitive environmental resources. Furthermore, a temporary truck turnaround will be required, as construction access is restricted to within 100 feet west of the bridge. Key deliverables and principal work items include: - Removal of the existing bridge structure (1 each) - Placement of roadway aggregate (120 tons, Method 2) - Installation of a prefabricated steel bridge (1 lump sum) - Installation of micropiles (8.68-inch diameter, 180 linear feet) - Temporary stream diversion (1 lump sum) The anticipated project timeline is as follows: advertisement in September 2026, contract award and notice to proceed in December 2026, with contract completion targeted for November 2027. The estimated cost range for the project is between $700,000 and $2,000,000. This opportunity is classified under NAICS Code 237310 (Highway, Street, and Bridge Construction) and Product Service Code Y1LB. There are no set-aside requirements for this solicitation, making it open to all qualified contractors. The contracting entity is the Central Federal Lands Division of the Federal Highway Administration. Interested parties may direct inquiries to Denise Martinez or Ryan D. Phillips at [email protected]. Contractors considering this opportunity should have demonstrated experience in bridge construction, culvert replacement, and environmentally sensitive work in remote or restricted-access locations. The project will require careful coordination to protect natural and historic resources while maintaining critical access routes within Rocky Mountain National Park. Further details, including solicitation documents and attachments, are available via the official SAM.gov opportunity listing at: https://sam.gov/opp/440eff17d31442a8bebc102758c8b49e/view.
Documents13