Automatic Liquid Sampler for Agilent 8890 Gas Chromatograph

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

USDA, FSIS, OAS PCMB

Contract Value

Not provided

Codes & Classification
Solicitation Number

ARS_1172105

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Classification Code

6640

Additional Details
Set Aside

NONE

Place of Performance

UNITED STATES

SourceSAM
The U.S. Department of Agriculture (USDA), Agricultural Research Service (ARS), through the Roman L. Hruska U.S. Meat Animal Research Center (USMARC) in Clay Center, Nebraska, has announced its intent to issue a solicitation for a firm-fixed-price contract to procure specialized Agilent brand accessories for its existing Agilent 8890 Gas Chromatograph system. This presolicitation notice, posted under procurement identifier ARS_1172105, outlines the agency’s requirement for an Automatic Liquid Sampler, a Split/Splitless Inlet, and a Flame Ionization Detector (FID), all of which must be fully compatible with the current Agilent 8890 infrastructure. The procurement is being conducted under the authority of FAR 12.102, restricting competition to brand-name specific items to ensure seamless integration and continued support for ongoing environmental sample analysis. The scope of this procurement encompasses the supply, delivery, installation, and operational verification of three key Agilent components: 1. **Split/Splitless Inlet (Agilent Part No. G3548A)** – Quantity: 1 This inlet must be compatible with the Agilent 8890 GC and support all capillary columns (50 to 530 μm id). It is required to offer split ratios up to 12,500:1, splitless mode for trace analysis, and a maximum operating temperature of at least 400°C. The inlet must feature electronic pneumatic control (EPC) with specified pressure ranges, gas saver mode, electronic septum purge flow control, and a tool-less liner change system. Chemically deactivated components are also required for durability and performance. 2. **Automatic Liquid Sampler (Agilent Part No. G4567A)** – Quantity: 1 The autosampler must be fully compatible with the Agilent 8890 GC, supporting standard 2 mL vials and micro vial inserts, with a minimum capacity of 50 samples. It should provide sample discrimination ≤10%, programmable dispense/draw/injection rates, and fast injection speeds (10^7. It should support data rates up to 1,000 Hz, standard EPC for three gases, flameout detection, automatic reignition, and a maximum operating temperature of at least 450°C. The detector must be mountable as a third detector on the left side of the GC system. **Installation and Performance Requirements:** The selected contractor will be responsible for the complete delivery, physical installation, and operational verification of all specified items. Coordination with the government point of contact is required to establish an installation schedule. All equipment must be delivered, installed, and fully operational within ninety (90) calendar days of contract award. **Place of Performance:** USDA ARS USMARC 844 Road 313 Clay Center, NE 68933 United States **Contracting Entity and Contact Information:** - Contracting Entity: USDA, FSIS, OAS PCMB (Federal Office) - Department: U.S. Department of Agriculture, Food Safety and Inspection Service - Primary Contact: Angela Carey - Email: [email protected] - Phone: 301-837-7781 **Classification and Procurement Details:** - NAICS Code: 334516 (Analytical Laboratory Instrument Manufacturing, 2022) - Product Service Code: 6640 - Set-Aside: None (full and open competition, brand-name restriction) - Procurement Type: Firm-fixed-price contract for brand-name specific items - Place of Performance: United States **Special Considerations:** This procurement is restricted to brand-name Agilent components to ensure compatibility with the existing Agilent 8890 GC system. The notice is a presolicitation and does not constitute a request for quotation or proposal. No response is required unless a vendor seeks to verify additional capabilities. **Summary for Contractors:** This opportunity is well-suited for suppliers and integrators with direct access to Agilent brand laboratory instrumentation and proven experience in the delivery, installation, and commissioning of gas chromatography accessories. The contract requires strict adherence to technical specifications, timely delivery, and on-site installation and verification. Interested parties should ensure their ability to provide genuine Agilent parts and meet the outlined performance and installation requirements within the specified timeframe. For further details or to monitor updates, contractors are encouraged to visit the official notice at [SAM.gov](https://sam.gov/opp/2a41976ac1034a819693d19db7ed689d/view).