554 RHS 50 K Water Well Drilling System (Deployable)

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

FA5240 36 CONS LGC

Contract Value

Not provided

Codes & Classification
Solicitation Number

FA524026Q0027

NAICS

333132 - Oil and Gas Field Machinery and Equipment Manufacturing

Classification Code

3820

Additional Details
Set Aside

NONE

Place of Performance

APO, ARMED FORCES - PACIFIC, UNITED STATES

SourceSAM
The Department of the Air Force, through the 36th Contracting Squadron (36 CONS LGC), has issued a combined synopsis/solicitation for the procurement of a deployable 50,000-lb water well drilling system, intended for use by the 554th RED HORSE Squadron (RHS). This opportunity, identified under procurement number FA524026Q0027, is classified under NAICS code 333132 (Oil and Gas Field Machinery and Equipment Manufacturing) and Product Service Code 3820. The place of performance is designated as APO, Armed Forces - Pacific (AP), United States. **Purpose and Scope** The primary objective of this procurement is to acquire a complete, fully operational water well drilling system capable of supporting remote island operations. The system must be robust, self-sufficient, and specifically engineered for rapid deployment and sustained operation in austere environments. The intended outcome is to enhance the Air Force’s ability to establish and maintain water access in remote locations, supporting both contingency and routine operations. **Key Requirements and Deliverables** The solicitation outlines stringent mandatory requirements for the drilling system, emphasizing operational capability, transportability, durability, and supportability: - **System Composition:** The procurement covers a comprehensive drilling system, including a prime mover tractor rig, drill trailer, mud recycling system, rig tender truck, drill site tender trailer, and all associated components. Equivalent or superior systems are acceptable if they meet or exceed the specified capabilities. - **Drilling Performance:** The system must support both air and mud rotary drilling to a total depth of 1,500 feet, with a minimum borehole diameter of 12 ¼ inches and a hoisting capacity of at least 50,000 lbs. - **Air Transportability:** All components must be air-transportable via C-17 or C-5 aircraft, supporting drive-on/drive-off loading without external handling equipment or shoring. Major components must remain intact during transport, and the system must comply with MIL-STD-1791 and MIL-STD-209. - **Engine and Fuel Requirements:** All diesel engines must be Tier 3 “Export Engines” or equivalent, capable of worldwide operation without Ultra-Low Sulfur Diesel (ULSD). No exceptions are permitted. - **Corrosion Protection:** The system must feature maximum corrosion/rustproof protection, with a minimum five-year life expectancy, and all components must be painted Desert Sand (No. 30313 FED-STD-595). - **Self-Sufficiency:** The system must operate continuously for at least 30 hours without servicing (other than refueling) and include integrated support equipment such as a welder, toolboxes, and fluid transport. - **Spare Parts:** A repair kit with expected replacement parts for components likely to fail over time must be included. **Salient Characteristics by Component** Each major component has detailed minimum specifications, including but not limited to: - **Prime Mover:** 275-350 HP Tier 3 diesel engine, all-wheel drive, 200-gallon fuel capacity, and cold weather operability down to -25°F. - **Drill Rig Engine:** 375 HP Tier 3 diesel engine. - **Top Head Drive:** Minimum 70,000 in-lb torque, variable speed up to 120 RPM. - **Mast and Feed System:** 100,000 lbs working capacity, 50,000 lbs pullback force, 25,000 lbs down pressure. - **Mud Recycling System:** 500 GPM processing, 2,500-gallon tank, self-contained Tier 4 Final diesel generator. - **Auxiliary Air Compressor:** 900 CFM @ 500 PSI and 1150 CFM @ 350 PSI, Tier 3 diesel engine. - **Rig Tender Truck:** 2,000-gallon water tank, 230-gallon auxiliary fuel, 14,000 lbs crane, 250-amp diesel welder/generator, 20,000 lb winch, 33-ton pintle hook. - **Drill Site Tender Trailer:** 30,000 lbs GVWR, 20 ft x 8 ft flatbed with tilt and winch. - **Grout Machine:** 0-30 GPM at up to 500 PSI, 1,000 ft hose reel. - **Duplex Mud Pump:** 300 GPM at 400 PSI, rig-mounted. **Mandatory Services and Support** Vendors must provide the following at delivery: - **Training:** At least 40 hours of on-site familiarization training each for operators and maintenance personnel, in accordance with Joint Federal Travel Regulation (JFTR) guidelines. - **Manuals and Data:** One hard copy and one electronic (IPDF) set of all operator, parts, and service manuals for every component and engine, delivered with the equipment. - **Diagnostics:** All necessary diagnostic software and devices for local troubleshooting and servicing, compatible with Windows 10 (64-bit) and free of vulnerabilities. - **Warranty:** Comprehensive coverage for all components for 24 months or 1,000 operating hours, whichever comes first (or the maximum available). - **Marking:** Standard military data plates with required information. - **Export Lift Kits:** Lifting kits for the rig tender truck and drill site tender trailer to facilitate overseas shipment. **Transportability and Certification** The system must be fully certified and configured for Roll-On/Roll-Off (RO/RO) airlift via C-17 aircraft, without disassembly. Key requirements include: - **Tie-Down Provisions:** Permanent, structurally welded D-rings or integrated tie-down points, compliant with MIL-STD-209K. - **Dimensional and Ramp Clearance:** Must allow unassisted loading/unloading via the C-17 cargo ramp, with no component interference. - **Floor Loading and Axle Weight:** Must not exceed C-17 floor limits; technical data for shoring must be provided if necessary. - **Center of Balance Markings:** CB, empty weight, and GVW must be permanently marked for load planning. - **Fluid and Environmental Sealing:** All reservoirs and tanks must have positive shut-off valves and be sealed for air transport per AFMAN 24-204. **Contracting Entity and Contact Information** - **Contracting Office:** FA5240 36 CONS LGC, Department of the Air Force, DEPT OF DEFENSE - **Primary Contact:** Gary Scullin, [email protected], +1 671-366-2192 - **Secondary Contact:** Gregor Hoessel, [email protected], +1 315-366-3673 **Procurement Type and Set-Aside** This is a combined synopsis/solicitation with no set-aside restrictions, open to all qualified vendors. The procurement is for a supply contract, with a focus on the delivery of a complete system and associated services. **Additional Information** - **Notice Status:** Active - **Response Deadline:** September 30, 2026, 10:00am AEST - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/af79f8ec9d8442c08d0c6348bfa09aac/view) - **Attachments:** 8 SAM attachments (details not provided) **Summary for Contractors** This opportunity is well-suited for manufacturers and integrators of heavy-duty, deployable drilling systems with proven experience in military or remote field applications. The requirements are highly specific, particularly regarding air transportability, operational self-sufficiency, and compliance with military standards. Prospective contractors should ensure their solutions meet or exceed all mandatory specifications and be prepared to provide comprehensive training, documentation, diagnostics, and warranty support. The absence of set-aside restrictions broadens eligibility, but the technical and logistical demands necessitate a high level of expertise and capability in both equipment manufacturing and military support operations.
Documents8