4340 Alloy Steel Bar - Watervliet Arsenal
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QK ACC WVA
Contract Value
Not provided
Codes & Classification
Solicitation Number
W911PT26FA350
NAICS
-
Classification Code
-
Additional Details
The Department of the Army, through its contracting office W6QK ACC WVA, has issued an award notice for the procurement of 4340 alloy steel bar, intended for delivery to the Watervliet Arsenal in Watervliet, New York. This procurement is managed under the identifier W911PT26FA350 and is currently listed as an active award notice.
The scope of this procurement encompasses the supply of 90 feet of 4340 alloy steel bar, conforming to stringent specifications outlined in SAE AMS6409, AMS6414, AMS6415, and AMS6484 standards. The required dimensions are 8.00 inches in outside diameter (O.D.), with a tolerance of +0.125 inches / -0.000 inches, and lengths of 10.00 feet (with a maximum allowable length of 12.00 feet, in 1.00-foot increments only), as detailed in drawing number 11579664RS. The steel bars must meet specific conditions as referenced in the respective sections of the AMS standards (AMS6409 Sec. 3.2.1, AMS6414 Sec. 3.3.1.2, AMS6415 Sec. 3.2.1.2, AMS6484 Sec. 3.2.1).
Key requirements for this procurement include:
- Only material of the specified alloy and quality is acceptable; merchant quality and free-machining grades are explicitly prohibited.
- The material must not be flame cut or cut from plate stock.
- If the shipment contains multiple heat lots, each article must be clearly marked or stamped with the specific heat lot numbers.
- The final draw or tempering temperature, along with supporting data, must be included in the certification package.
- Certified test reports are required with each shipment to verify compliance with the specified standards.
- Inspection of the material is mandatory prior to acceptance.
- All contract data must be prepared and delivered in accordance with the contract data requirements.
The intended outcome of this procurement is to ensure the Watervliet Arsenal receives high-quality, specification-compliant alloy steel bar for its operational needs, supporting the Army’s manufacturing and maintenance activities.
The contracting entity is a federal office under the Department of Defense, specifically the Department of the Army. The primary point of contact for this procurement is Stephanie Webster, who can be reached at [email protected] or by phone at 518-266-4368.
This opportunity is classified as an award notice and is sourced from BIDMATCH_SAM, with further details available on the SAM.gov portal (Opportunity ID: 77fa83b3c0234360bd576249d7205aab). No set-aside requirements or special considerations are specified in the notice, and there are no attachments or additional documents provided.
Contractors with capabilities in producing and supplying high-grade alloy steel bars to precise military specifications, and who can meet the rigorous certification and inspection requirements, may find this opportunity aligns well with their expertise and operational strengths. The requirements for traceability, quality assurance, and compliance with detailed technical standards will remain constant throughout the contract lifecycle.