PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNE19
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QNE19) for the supply of a "Parts Kit, Ball Valve" under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is classified under Product Service Code 4820, which pertains to valves, non-powered. The solicitation is currently active and is set to close on November 20, 2026.
**Purpose and Scope**
The primary objective of this procurement is to acquire parts kits for 1/2 inch ball valves, specifically for use in critical shipboard systems. The intended outcome is to ensure the reliable operation of vital naval systems where failure could result in serious injury, loss of life, or significant damage to shipboard assets. As such, the material is designated as "Special Emphasis" (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to guarantee the delivery of correct and defect-free components.
**Key Requirements and Deliverables**
The parts kit must consist of one ball and two mating seats, manufactured in strict accordance with NAVSEA Drawing 8543662 (piece 3, Ball) and Drawing 7284884 (piece 3, Seats), with any modifications or amplifications as specified in the solicitation. The following are the principal material and certification requirements:
- **Ball:** Manufactured from SAE-AMS-QQ-S-763, Class 304, Condition A stainless steel.
- **Seats:** Made from Nylatron GSVQ-II (Nylon 66 with molybdenum disulfide), conforming to MIL-DTL-32286, as produced by Quadrant Engineering Plastic Products (EPP).
Certifications are required for quantitative chemical and mechanical analysis, intergranular corrosion testing (for the ball), and non-destructive testing for weld repairs or production welds. All certifications must reference the applicable standards and acceptance criteria, and must be traceable to the specific material batch or heat.
Additional requirements include:
- **Seat Stack Height Measurement:** Each seat must be measured for stack height tolerance with the ball, as per CSD171.
- **Surface Finish:** The ball’s sealing area must not exceed 0.0005 inches of spherical surface waviness per inch.
- **Welding/Brazing:** All welding and brazing must comply with NAVSEA and MIL standards, with procedures and personnel qualifications submitted for approval prior to work.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- **Mercury-Free:** No mercury or mercury-containing compounds may be used or come into contact with supplied hardware.
- **Traceability:** All materials must be permanently marked for traceability, and records must be maintained throughout the manufacturing and delivery process.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration per ISO-10012 or ANSI-Z540.3/ISO-17025.
- **Inspection and Acceptance:** Government Quality Assurance at source is required, and all products are subject to inspection for form, fit, function, and traceability. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Heather R. Jones
- Email: [email protected]
- Facsimile: 717-605-4236
**Procurement Type and Special Considerations**
This solicitation is a total small business set-aside, in accordance with applicable federal regulations. The procurement will be conducted as a fixed-price contract, and the resultant award will be issued bilaterally, requiring written acceptance from the contractor. The contract is DX rated under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense and emergency preparedness.
Emergency Acquisition Flexibilities (EAF) apply to this requirement, and the government will consider past performance in the evaluation of offers. All contractual documents may be issued electronically, and contractors must comply with Wide Area Workflow (WAWF) payment instructions.
**Packaging and Delivery**
Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional requirements specified in the contract schedule. No material is to be shipped prior to receipt of acceptance from the government.
**Access to Drawings and Data**
Drawings and technical data are controlled; access must be requested via the solicitation page on SAM.gov, followed by email notification to the listed point of contact.
**Summary for Contractors**
This opportunity is well-suited for small businesses with expertise in precision manufacturing of metal and polymer valve components, robust quality assurance systems, and experience with high-assurance, traceable supply chains for critical defense applications. Contractors must be prepared to meet rigorous documentation, certification, and inspection requirements, and to maintain strict configuration and process control throughout the contract lifecycle. The contract’s critical safety designation and DPAS rating underscore the importance of reliability, compliance, and timely delivery.
For further details and to access the solicitation, visit the official notice at [SAM.gov](https://sam.gov/opp/cb5530f764844b6381f9e42ee0d322f5/view).