STEM,FLUID VALVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QND67
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4810
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QND67) for the supply of a STEM, FLUID VALVE assembly. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4810, indicating its relevance to contractors specializing in metal valve and pipe fitting manufacturing for shipboard applications.
**Purpose and Scope**
The primary objective of this procurement is to acquire a stem assembly for a 10-inch ball valve, which is a critical component used in vital shipboard systems. The assembly includes the stem (piece 79), retaining nut (piece 80), and bushing (piece 81), and must be manufactured in strict accordance with Naval Ships Systems Command drawings and specifications. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its importance to ship safety and operational integrity. Incorrect or defective material could result in catastrophic failure, serious injury, or loss of shipboard systems.
**Key Requirements and Deliverables**
- **Technical Specifications:** The assembly must conform to specific Naval drawings (803-4385051, 803-4384678, and associated detail drawings) and referenced standards (e.g., ASTM-B505, QQ-N-286, MIL-STD-792, ISO 9001, ISO 10012, ISO/IEC 17025, ANSI/ASQ Z1.4).
- **Material and Testing:** The stem must be made from QQ-N-286, Form 2, annealed and age-hardened, with quantitative chemical and mechanical analysis required. The retaining nut is to be manufactured from alloy UNS C90300 per ASTM-B505. Non-destructive testing, dye penetrant inspection, ultrasonic inspection, and slow strain rate tensile tests are required, with testing performed at approved laboratories.
- **Welding and Brazing:** All welding and brazing must comply with Navy standards (S9074-AR-GIB-010A/278, S9074-AQ-GIB-010/248, 0900-LP-001-7000), with procedures and personnel qualifications submitted for approval. Repair welding is not permitted on QQ-N-286 and Alloy UNS C90300.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. Government quality assurance at source is required, and the contractor’s quality system is subject to audit.
- **Traceability and Certification:** Rigorous traceability from material to certification test reports is mandatory. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Compliance:** Mercury and mercury-containing compounds are strictly prohibited. All supplied items must be free from mercury contamination.
**Contracting Entity and Contact Information**
- **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS)
- **Department:** Department of Defense, Department of the Navy
- **Location:** Mechanicsburg, PA
- **Primary Contact:** Heather R. Jones, Telephone: 717-605-4866, Email: [email protected]
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price contract, issued bilaterally, requiring written contractor acceptance.
- **Set-Aside:** This is a total small business set-aside, encouraging participation from qualified small businesses.
- **Emergency Acquisition Flexibilities:** The requirement is issued under Emergency Acquisition Flexibilities (EAF), and the resultant contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS).
- **Evaluation:** Past performance will be considered in accordance with FAR 13.106(a)(2).
- **Data Submission:** Certification documentation must be submitted electronically via WAWF and ECDS (Electronic Contractor Data Submission).
**Constant Elements Throughout Contract Lifecycle**
- The technical and quality requirements, traceability, and certification standards will remain unchanged throughout the contract.
- The requirement for government source inspection and acceptance prior to shipment is a constant.
- The prohibition of mercury and the need for compliance with Navy-specific welding, brazing, and material standards are enduring.
- The contract’s emphasis on configuration control, waivers/deviations, and engineering change proposals will persist.
**Summary for Contractors**
This opportunity is highly specialized and demands strict adherence to Navy technical, quality, and certification standards. Contractors must demonstrate robust quality systems, experience with critical shipboard components, and the ability to manage traceability and compliance documentation. The procurement is suitable for small businesses with expertise in metal valve and pipe fitting manufacturing, particularly those familiar with Navy shipboard requirements and capable of meeting rigorous quality assurance and certification protocols.
Interested parties should review the solicitation in detail and direct any questions to the primary contact. The solicitation is active, with responses due by September 28, 2026. For further information and access to the solicitation, visit the official notice at [SAM.gov](https://sam.gov/opp/9736fd3c063b41f4a7f2f89a84c50e85/view).