Atomic Layer Deposition (ALD) Batch Reactor
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
DEPT OF COMMERCE NIST
Contract Value
Not provided
Codes & Classification
Solicitation Number
1333ND26QNB030533
NAICS
333242 - Semiconductor Machinery Manufacturing
Classification Code
5961
Additional Details
Documents1
The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), has issued a solicitation for the procurement of an Atomic Layer Deposition (ALD) Batch Reactor. This opportunity, identified by procurement number 1333ND26QNB030533, is classified under NAICS code 333242 (Semiconductor Machinery Manufacturing) and Product Service Code 5961. The place of performance is Gaithersburg, Maryland, United States.
The primary objective of this procurement is to acquire an ALD batch reactor system that will support NIST’s ongoing research and development activities in semiconductor technology. The intended outcome is to enhance NIST’s capabilities in precise thin-film deposition, enabling advanced material studies and device fabrication. The system must be capable of processing a single 200 mm wafer as well as smaller substrate pieces, meeting the requirements for flexibility in sample size without the necessity for multi-wafer batch processing.
Key requirements and deliverables for this procurement include:
- The ALD system must feature five single-port precursor sources, with one dedicated to ozone and four independently heated 50 mL precursor cylinders. All precursor sources and the ozone source must be supported simultaneously, without the need for reconfiguration or exchanging source connections.
- The system must be end-user installable, with assembly limited to connecting compressed air, nitrogen supply, electrical power, and reactant sources. NIST will provide facility utilities (power, compressed air, carrier gas) at or adjacent to the tool location, and will handle all external connections, including gas and exhaust lines. The contractor is not responsible for extending, rerouting, or orbitally welding facility gas lines.
- The vacuum pump is provided by NIST, with an inlet of NW40 and an outlet of either NW25 or NW40. If the tool pump port is smaller than NW40, NIST can use a reducer. Ozone destruct and vented precursor cabinet are the contractor’s responsibility and must interface with common flexible duct hoses (typically 2.5" or 3.0" inner diameter). The distance between utilities and the tool location is approximately 36 inches.
- Utility requirements are limited to power, compressed air, and carrier gas; chilled water is not readily available.
- Delivery is FOB Destination to NIST Shipping and Receiving in Gaithersburg, MD. The contractor is not required to provide uncrating, rigging, cleanroom wipe-down, or final placement.
- NIST will furnish the ALD and SAM precursors required for commissioning and acceptance testing.
- Acceptance tests and associated metrology will be performed by NIST personnel using government equipment; contractor or OEM support is not required for these activities.
- The system must include a minimum one-year warranty period, commencing after acceptance. Warranty service requirements are specified in the requirements document.
The contracting entity is the Department of Commerce, NIST, a federal office located in Gaithersburg, Maryland. The primary point of contact for this solicitation is Sadaf Afkhami, who can be reached at [email protected] or 301-975-3976.
This solicitation is active, with quotes due no later than 9:00 AM EST on September 1, 2026. Interested contractors should review the attached Form SF1449 and ensure their proposals address all specified requirements. The procurement is not identified as a set-aside, and no special considerations such as small business preferences are noted in the provided information.
Contractors evaluating this opportunity should ensure their ALD batch reactor solutions align with NIST’s technical specifications, facility interface requirements, and warranty provisions. The scope and requirements are clearly defined, with NIST assuming responsibility for facility connections, precursor supply, and acceptance testing, thereby streamlining the contractor’s obligations to system delivery, installation readiness, and warranty support.
For further details and to access the solicitation documents, contractors may visit the official SAM.gov opportunity page at https://sam.gov/opp/79be3c4d1c304e9d85edc714d43d4799/view.