Foster Spillway Gate Nut Replacement and Re-Tensioning
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W071 ENDIST PORTLAND
Contract Value
Not provided
Codes & Classification
Solicitation Number
PANNWD-26-P-0000033137
NAICS
237990 - Other Heavy and Civil Engineering Construction
Classification Code
Z2KA
Additional Details
Documents2
The U.S. Army Corps of Engineers (USACE), Portland District, is conducting market research through a Sources Sought notice for the upcoming Foster Spillway Gate Nut Replacement and Re-Tensioning project, located in Albany, Oregon. This initiative is aimed at identifying qualified contractors capable of performing specialized heavy and civil engineering construction services, as classified under NAICS code 237990 (Other Heavy and Civil Engineering Construction), with the associated Product Service Code Z2KA.
The primary objective of this procurement is the comprehensive replacement and adjustment of critical gate connection components at the Foster Dam spillway. The scope of work includes the removal and replacement of 192 custom-made castle nuts (approximately two inches in diameter and length, fabricated from A564 UNS 17400 Type 630 Condition H1100 material, commonly known as 17-4 stainless steel), 48 custom U-bolts (1-1/8-inch diameter rod, bent to 18 inches with a six-inch radius, also from 17-4 stainless steel), eight custom U-bolt spacers (approximately six inches in diameter by twelve inches long, made from self-lubricated composite material), and eight gate connection pins (approximately four inches in diameter by sixteen inches long, again from 17-4 stainless steel). Additionally, the contractor will be required to supply one custom installation tool (approximately two inches in diameter by ten inches long, made from the same 17-4 stainless steel) specifically designed for the installation of the castle nuts.
Following the replacement of these components, the contractor will be responsible for the precise release and re-tensioning of the wire ropes on each gate. This process must ensure that the tension is equalized from one side of the gate to the other, preventing the gate from rubbing against the side walls during vertical movement and ensuring even contact with the spillway ogee. The contractor is expected to manage all preparatory and finishing activities related to the release and re-tensioning of the wire ropes.
The anticipated construction schedule indicates that the solicitation will be advertised in November 2026, with contract award projected for December 2026. Contractors will be required to propose a work schedule for USACE approval, taking into account any operational or environmental restrictions that may be communicated during the solicitation phase.
The estimated construction cost for this project is between $1,000,000 and $5,000,000. USACE Portland District intends to award a single Firm Fixed-Price contract for this requirement. While the final acquisition strategy is yet to be determined, maximum participation by small businesses is being sought at both the prime and subcontracting levels.
The anticipated source selection process is an Invitation for Bid (IFB), with the goal of determining the best value to the government. Contractors should note that compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 (Self) is required. This certification, or higher as specified in 32 CFR part 170, must be in place prior to award and maintained throughout the contract period for any contractor information systems processing, storing, or transmitting Federal contract information (FCI) or controlled unclassified information (CUI).
The contracting entity for this opportunity is the Portland District Office (W071 ENDIST PORTLAND) of the Department of the Army, Department of Defense. Interested parties may direct inquiries to the primary contact, Chris Burroughs ([email protected]), or the secondary contact, Justin F. Figueredo ([email protected], 503-808-4628).
This notice remains active, with responses due by September 1, 2026. Contractors with relevant experience in heavy and civil engineering construction, particularly those with expertise in custom fabrication and installation of stainless steel and composite components, as well as precision tensioning of mechanical systems, are encouraged to review the opportunity in detail at https://sam.gov/opp/69362607098c4e5dbc6b91ae7872ac9e/view.