BEARING,SLEEVE
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFG41
NAICS
332991 - Ball and Roller Bearing Manufacturing
Classification Code
3120
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support office in Mechanicsburg, PA, has issued a solicitation (Procurement Identifier: N0010426QFG41) for the supply of a flanged Bearing Sleeve, classified under Product Service Code 3120 (Bearings, Plain, Unmounted) and NAICS Code 332991 (Ball and Roller Bearing Manufacturing). This procurement is critical in nature, supporting a crucial shipboard system where material failure could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures.
**Purpose, Scope, and Intended Outcomes:**
The primary objective of this solicitation is to acquire a Bearing Sleeve, flanged, manufactured in strict accordance with NAVSEA drawing 7384566, item 58, with additional requirements and modifications as specified in the solicitation. The bearing sleeve contains non-metallic materials and must meet the toxicity and flammability standards outlined in NAVSEA SS800-AG-MAN-010/P-9290. The end-use application is a critical shipboard system, and the procurement is rated as a DO order under the Defense Priorities and Allocations System (DPAS), underscoring its importance to national defense and emergency preparedness.
**Key Requirements, Objectives, and Deliverables:**
- **Approved Source:** Kamatics (drawing KJB953448F) is the approved source of supply for this item, referenced for informational purposes.
- **Material Restrictions:** Mercury and mercury-containing compounds are strictly prohibited; any contamination will result in rejection.
- **Configuration Control:** The contractor must maintain baseline configuration and provide proprietary design drawings in electronic format. All waivers, deviations, and engineering change proposals (ECPs) require prior government approval.
- **Certification and Traceability:** A Certificate of Compliance is mandatory, certifying full compliance with all specifications and traceability to each item. Objective Quality Evidence (OQE) must be maintained and traceability markings applied per MIL-STD-792.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system is subject to government audit and approval.
- **Inspection and Testing:** Final inspection must ensure zero defects, with lot acceptance based on stringent sampling plans (ANSI/ASQ Z1.4 or applicable military standards). All OQE and certification test reports must be 100% inspected for completeness and legibility.
- **Subcontractor Oversight:** The government reserves the right to inspect supplies or services at subcontractor facilities, and all relevant quality requirements must be flowed down to subcontractors.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and contract-specific requirements.
- **Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance.
**Contracting Entity and Contact Information:**
- **Entity:** NAVSUP Weapon Systems Support (WSS) Mechanicsburg
- **Department:** Department of Defense, Department of the Navy
- **Location:** Mechanicsburg, PA
- **Primary Contact:** Noelle M. Smith, Telephone: 717-605-3992, Email: [email protected]
**Procurement Type and Special Considerations:**
This is a federal solicitation for a fixed-price supply contract, with no set-aside or small business preference information specified in the notice. The procurement is subject to the Buy American Act and Balance of Payments Program. The contract will be issued electronically, and all contractual documents are considered "issued" upon electronic transmission or mailing. The awarded contract will be DO-rated for national defense, requiring prioritized performance and delivery.
**Additional Considerations:**
- The item is classified as a Critical Safety Item (CSI), and any failure could have catastrophic consequences.
- All documentation, drawings, and data are subject to distribution and safeguarding requirements per OPNAVINST 5510.1.
- The contractor must be prepared for rigorous oversight, including possible audits, source inspections, and compliance with detailed reporting and traceability requirements.
- The warranty period for supplies is one year (365 days) from the date of last delivery.
**Summary for Contractors:**
This opportunity is best suited for manufacturers with proven experience in producing high-reliability, quality-assured components for naval or defense applications, particularly those familiar with Level I/Special Emphasis material requirements and capable of meeting strict configuration, traceability, and quality assurance standards. The solicitation requires robust quality management systems, the ability to manage and document complex certification and traceability requirements, and readiness for government oversight at all stages of production and delivery. Contractors must be able to comply with all technical, quality, and administrative requirements as outlined, and should review the referenced specifications and drawings to ensure full capability to deliver the required bearing sleeve in accordance with all contract terms.
Interested parties should review the full solicitation and associated documents on SAM.gov (Opportunity ID: 9c7231cc9bd0409db3a5a9f3a8cee362) and direct any questions to the primary contact listed above. The response deadline is September 30, 2026.