Combined Sources Sought Notice and Notice of Intent to Award a Sole Source Contract for FPGA-based GHz Multi-instrument
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
DEPT OF COMMERCE NIST
Contract Value
Not provided
Codes & Classification
Solicitation Number
NIST-SS26-153
NAICS
334516 - Analytical Laboratory Instrument Manufacturing
Classification Code
6640
Additional Details
The National Institute of Standards and Technology (NIST), under the Department of Commerce, has issued a Combined Sources Sought Notice and Notice of Intent to Award a Sole Source Contract for an FPGA-based GHz Multi-instrument. This procurement activity is being conducted by the Physical Measurement Laboratory (PML), Radiation Physics Division, Dosimetry Group, located in Gaithersburg, Maryland. The primary objective is to identify potential sources capable of providing a commercial, high-performance, FPGA-based instrument system that meets NIST’s stringent technical requirements for advanced dosimetry research and standards development.
Purpose and Scope:
NIST’s Dosimetry Group is engaged in projects to realize the gray (Gy), the SI unit of absorbed dose, in various materials and conditions relevant to medical radiotherapy, industrial sterilization, and semiconductor manufacturing. The group requires specialized instrumentation to support high-resolution imaging of dose fields in water and silicon, as well as to facilitate measurement standards for absorbed dose using thermistor probes, ultrasound imaging, and photonic sensors. The sought FPGA-based GHz Multi-instrument will serve as a critical platform for developing proof-of-concept laboratory prototypes, enabling advanced measurement capabilities such as GHz lock-in detection, high-speed phase and spectral analysis, frequency-comb generation, and customizable signal generation and analysis across multiple channels and sensor arrays.
Key Requirements and Expected Deliverables:
The contractor is expected to provide a new, commercially available FPGA-based instrument (not used, remanufactured, experimental, prototype, or custom-built) that meets or exceeds the following minimum technical specifications:
- At least 4 analog input and 4 analog output channels
- ADC and DAC sample/update rates of at least 5 GS/s, with 14-bit resolution
- Input noise spectral density below 10 nV/√Hz at/above 100 Hz
- Spectral purity/clock jitter of 10 ps or lower
- Data transfer rates of 1 GS/s or better
- Local data storage capacity of 1 TB
- Instrument functionalities (configurable via software) including:
- Waveform generator (DC to 500 MHz, 4+ channels, 14-bit, AM/FM/PM/PWM modulation)
- Arbitrary waveform generator (5 GS/s, 4+ channels, 14-bit, unlimited memory, 500 MHz bandwidth)
- Oscilloscope (2 GS/s, 4+ channels, 14-bit)
- Phase analyzer (10 μrad resolution, 500 MS/s update, 1 MHz LPF bandwidth)
- Spectrum analyzer (500 MHz range, 1 Hz resolution bandwidth, 4+ channels)
- Lock-in amplifier (4+ channels, dual quadrature, 10 nV/√Hz input noise, 120 dB dynamic reserve, 1 Hz–1 MHz LPF, DC–500 MHz)
- Pound-Drever-Hall (PDH) lock (4+ channels, 10 MHz scan frequency, 3 kHz–30 MHz filter range)
- Software support for all instrument functions, plus DIO pattern generator and logic analyzer (32-bit DIO port), customizable multi-instrument coordination, and neural-net instrumentation mode
- All items must be shipped in original manufacturer’s packaging with all documentation and software; gray market components are not acceptable.
Contracting Entity and Classification:
This procurement is managed by the National Institute of Standards and Technology (NIST), a federal office under the Department of Commerce. The applicable NAICS code is 334516 (Analytical Laboratory Instrument Manufacturing), with Product Service Code 6640. The place of performance is Gaithersburg, Maryland, USA.
Procurement Type and Special Considerations:
This notice is a market research tool (Sources Sought) and does not constitute a solicitation or a commitment to award. NIST is considering a sole source procurement with Liquid Instruments Inc. but is actively seeking information from other capable and interested sources. There is no set-aside for small businesses or other socioeconomic categories. All responses must demonstrate the ability to meet the stated requirements with commercial, off-the-shelf products (no experimental or custom solutions).
Interested parties are encouraged to provide detailed company information, feedback on the draft requirements, product and service specifications, commercial pricing, terms and conditions, and information on existing government contract vehicles (e.g., GSA MAS). Responses should be submitted electronically to the designated contacts.
Contact Information:
Primary Contact: Nina Lin ([email protected])
Secondary Contact: Donald Collie ([email protected])
Additional Details:
- Notice ID: NIST-SS26-153
- Opportunity ID: 0343019e2ca94b3b9f6f34680397cfb5
- Notice posted on: August 14, 2026
- Response deadline: August 24, 2026
- Notice status: Active
- Notice URL: https://sam.gov/opp/0343019e2ca94b3b9f6f34680397cfb5/view
This notice is intended to maximize competition and inform the acquisition strategy. Contractors with relevant capabilities are strongly encouraged to review the requirements and respond as outlined. No contract will be awarded based solely on responses to this notice, and no reimbursement will be made for any costs incurred in responding.