48--VALVE,GLOBE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNE54

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (N0010426QNE54) for the procurement of a 1-Inch In-line Stop Check Globe Valve, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is critical in nature, supporting vital shipboard systems where material failure could result in severe consequences, including personnel injury, loss of life, or loss of shipboard systems. As such, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures. **Purpose, Scope, and Intended Outcomes:** The primary objective of this solicitation is to acquire a complete 1-Inch In-line Stop Check Valve in strict accordance with NAVSHIPS drawing 2177934, Assembly 803-2177934-C531AF, with specific modifications and amplifications as detailed in the solicitation. The valve will be used in a crucial shipboard application, necessitating the highest standards of material integrity, traceability, and compliance with Navy specifications. The intended outcome is to ensure the delivery of a fully compliant, high-reliability valve assembly that meets all technical, safety, and quality requirements for use in mission-critical naval systems. **Key Requirements, Objectives, and Deliverables:** - **Technical Specifications:** The valve and its components must conform to the referenced NAVSHIPS drawing and a comprehensive list of federal, military, and industry standards (e.g., MIL-C-24679, QQ-N-281, ASTM-B164, ISO 9001, ISO 10012, MIL-STD-792, etc.). Specific material requirements and certification for each major part (body, bonnet, bonnet ring, stem, disc holder, seat ring) are detailed, including chemical and mechanical analysis. - **Testing and Certification:** Each assembly must undergo pressure and non-destructive testing per the applicable drawings and specifications. Certifications for these tests are mandatory, and all test results must be submitted with each shipment. - **First Article Testing:** A First Article Test (FAT) and approval are required, including non-destructive inspection of one unit as specified in the technical documentation. - **Welding and Brazing:** All welding, brazing, and allied processes must comply with Navy standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted and approved prior to any welding or brazing activities. - **Traceability and Certification:** Full traceability from raw material to finished product is required, with unique traceability markings and comprehensive certification data. Certificates of compliance must be provided, demonstrating adherence to all contractually invoked specifications and requirements. - **Quality Assurance:** The contractor must maintain a quality system in accordance with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to government review and audit. - **Packaging and Marking:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and any additional contract requirements. - **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any changes affecting form, fit, function, or interface. - **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with the supplied hardware. - **Government Furnished Material/Equipment:** If applicable, the contractor must implement documented control procedures for any government-furnished material or equipment. **Contracting Entity and Contact Information:** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Stephen A. Knox, Phone: 717-605-6805, Email: [email protected] **Location and Classification:** - **NAICS Code:** 332919 (Other Metal Valve and Pipe Fitting Manufacturing) - **PSC:** 4820 (Valves, Nonpowered) - **FOB:** Destination **Procurement Type and Special Considerations:** - **Solicitation Type:** This is a formal solicitation for a fixed-price contract. - **Emergency Acquisition Flexibilities (EAF):** The requirement is being pursued under EAF, indicating an expedited acquisition process due to urgent operational needs. - **DPAS Rating:** The resultant contract will be DO certified under the Defense Priorities and Allocations System (DPAS), signifying priority for national defense. - **Bilateral Award:** The contract will be awarded bilaterally, requiring written acceptance from the contractor. - **Quality and Compliance:** The procurement invokes a range of federal, military, and industry standards, with a strong emphasis on quality assurance, traceability, and compliance documentation. - **Past Performance:** NAVSUP WSS Mechanicsburg will consider past performance in the evaluation of offers. - **No Set-Aside Indicated:** There is no explicit mention of small business set-aside or other socioeconomic set-aside requirements in the provided information. **Submission and Acceptance:** - **Certification Data Submission:** All certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). No material may be shipped before receipt of acceptance. - **Response Deadline:** Offers are due by November 30, 2026. **Constant Elements Over Contract Lifecycle:** - The requirement for strict adherence to technical specifications, quality assurance, traceability, and certification will remain constant throughout the contract. - The need for government source inspection, configuration control, and compliance with all referenced standards and procedures will persist for the duration of the contract. - The prohibition on mercury and the requirement for a robust quality management system are enduring requirements. **Summary for Contractors:** This solicitation represents a highly specialized and technically demanding procurement for a critical shipboard valve assembly. Contractors must demonstrate proven capability in manufacturing to exacting military and federal standards, maintain rigorous quality and traceability systems, and be prepared for comprehensive government oversight and documentation requirements. The opportunity is best suited for firms with experience in defense contracting, particularly those familiar with Level I/SUBSAFE material controls, Navy quality assurance protocols, and the production of critical safety items for naval applications. For further details and to access the full solicitation, interested parties should refer to the official notice on SAM.gov (Opportunity ID: 90f4069a17f442c295d09436c41ffdef).