48--GUIDE,VALVE STEM
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QNE38
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a Guide, Valve Stem, intended for use in critical shipboard systems. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered). The solicitation is active and responses are due by December 3, 2026. Interested parties may access the solicitation via SAM.gov (Opportunity ID: f3618f9f8a444f5c9791b8d18ed8c417).
**Purpose and Scope**
The Guide, Valve Stem is a component designated as SPECIAL EMPHASIS material, reflecting its critical role in shipboard systems where failure could result in serious injury, loss of life, or catastrophic damage to the vessel. The procurement is governed by stringent quality assurance and traceability requirements to ensure the integrity and reliability of the supplied material. The item is to be manufactured in accordance with Vacco Valves drawing V3E10041, item 3, with specific modifications and amplifications as detailed in the solicitation.
**Key Requirements and Objectives**
- **Material and Certification:** The Guide must be fabricated from SAE AMS 5643, condition H-1025, with quantitative chemical and mechanical analysis required. Certifications for non-destructive tests, weld repairs, and production welds must be provided, conforming to applicable fabrication specifications.
- **Welding and Brazing:** All welding, brazing, and allied processes must comply with Navy standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted for review and approval prior to any welding or brazing activities.
- **Thread Inspection:** All threads must be inspected per FED-STD-H28 series or ASME B1 series, with System 21 as the minimum requirement unless otherwise specified.
- **Traceability:** The contractor must maintain traceability from the material to certification test reports and other Objective Quality Evidence (OQE). Unique traceability markings must be applied to the material and reflected in certification documentation.
- **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Quality system documentation must be available for government review and audit.
- **Inspection and Acceptance:** Government Quality Assurance will be performed at the source. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Compliance and Reporting:** Certificates of compliance must be submitted, showing traceability to individual item markings and affirming full compliance with all specifications and requirements. Discrepancy reporting and nonconformance management procedures are required.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Stephen A. Knox, Telephone: 717-605-6805, Email: [email protected]
- **Location:** Mechanicsburg, PA
**Procurement Type and Special Considerations**
This is a fixed-price solicitation issued under Emergency Acquisition Flexibilities (EAF), with a bilateral award process requiring written contractor acceptance. The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense and emergency preparedness. If the offeror is not the Original End Manufacturer (OEM), a signed letter of authorization from the OEM is required. Packaging at a location different from the offeror’s address must be disclosed.
**Constant Elements Throughout Contract Lifecycle**
- The Guide, Valve Stem will remain a critical safety item (CSI) throughout the contract, subject to rigorous quality assurance, traceability, and configuration control requirements.
- All certifications, inspection records, and compliance documentation must be maintained and made available for government review.
- The contractor’s quality system and procedures will be subject to ongoing evaluation and audit.
- Government inspection and acceptance processes, including submission of certification data via WAWF, will be required for each shipment.
- All applicable standards, specifications, and referenced documents must be adhered to, with updates and revisions managed per contract requirements.
**Summary for Contractors**
Contractors considering this opportunity should have demonstrated capabilities in precision manufacturing of metal valve and pipe fittings, robust quality assurance systems, and experience with Navy and defense-related standards. The solicitation demands strict adherence to material traceability, certification, and configuration control, as well as compliance with specialized welding and inspection requirements. The procurement is high-priority and supports national defense objectives, making it suitable for contractors with established processes for handling critical safety items and government source inspection protocols.
For further information and to access the solicitation, visit [SAM.gov Opportunity](https://sam.gov/opp/f3618f9f8a444f5c9791b8d18ed8c417/view) or contact Stephen A. Knox at [email protected].