DISK,VALVE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QND43

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a specialized component titled "DISK, VALVE." This requirement is classified under NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820 (Valves, Nonpowered). The solicitation is active and open for responses until October 14, 2026. Interested parties may access the full notice at https://sam.gov/opp/4e470f1e5aa84171a960ceb494faac38/view. The primary point of contact for this procurement is Zachary R. Morrill, reachable at 717-605-1552 or via email at [email protected]. **Purpose and Scope** The procurement is for a poppet component used in a 1/4 IPS valve assembly, intended for installation in a critical shipboard system. The nature of this application demands the highest standards of quality and traceability, as any failure or defect could result in catastrophic consequences, including personnel injury, loss of life, or loss of vital shipboard systems. Accordingly, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking rigorous control procedures to ensure the correct material is received and installed. **Key Requirements and Objectives** - **Technical Specifications:** The poppet must conform to Marotta Scientific Controls drawing 283937-0001, item 13, with modifications as specified in the solicitation. The material required is SAE AMS-QQ-S-763, Class 316 stainless steel. - **Testing and Certification:** Certifications are mandatory for non-destructive tests (weld repair and/or production welds) and intergranular corrosion tests, particularly for specified material classes. All testing must be performed and certified per applicable fabrication specifications. - **Welding and Brazing:** All welding, brazing, and allied processes must comply with NAVSEA standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted for review and approval prior to any welding or brazing activities. - **Quality Assurance:** Contractors must maintain a quality system in accordance with ISO-9001, with calibration systems per ISO-10012 or ANSI-Z540.3 and ISO-17025. MIL-I-45208 and MIL-STD-45662 are also referenced. The quality system is subject to government evaluation and audit. - **Traceability:** All materials must be traceable from the raw material to the finished component, with unique traceability markings linked to certification test reports. This includes requirements for marking, segregation, and control throughout all process operations, including subcontracted work. - **Certificate of Compliance:** Contractors must submit certificates of compliance demonstrating full adherence to all specifications, drawings, and invoked standards. These certificates must show traceability to individual item markings and include detailed information as outlined in the solicitation. - **Inspection and Acceptance:** Inspection and acceptance points are to be determined (TBD), with government quality assurance performed at the source. Final inspection requires zero defects for lot acceptance, and all certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. **Contracting Entity and Location** - **Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department:** Department of Defense, Department of the Navy - **Location:** Mechanicsburg, PA - **Contact:** Zachary R. Morrill, 717-605-1552, [email protected] **Procurement Type and Special Considerations** - **Solicitation Type:** This is a bilateral solicitation, requiring written acceptance by the contractor prior to award. - **Emergency Acquisition Flexibilities (EAF):** The requirement is issued under EAF, indicating urgency and priority for national defense. - **DPAS Rating:** Any contract resulting from this solicitation will be DO certified under the Defense Priorities and Allocations System (DPAS), signifying priority for national defense and emergency preparedness. - **OEM and Distributor Requirements:** If the offeror is not the Original End Manufacturer (OEM), the OEM must be identified, and a signed letter of authorization as a distributor must be provided. - **Subcontracting and Source Inspection:** The government reserves the right to inspect supplies and services at the source, including subcontractor facilities. Subcontractors must comply with all quality and traceability requirements. - **Mercury-Free Requirement:** Mercury and mercury-containing compounds are strictly prohibited in the supplied hardware. - **Electronic Data Submission:** Certification documentation must be submitted via Wide Area Work Flow (WAWF), with specific instructions for notification and acceptance by Portsmouth Naval Shipyard. No material may be shipped prior to receipt of acceptance. **Constant Elements Throughout Contract Lifecycle** - **Quality and Traceability:** The requirement for rigorous quality assurance, traceability, and certification will remain constant throughout the contract lifecycle. - **Compliance with Standards:** Adherence to specified military, federal, and commercial standards, as well as NAVSEA and ISO requirements, is mandatory. - **Government Oversight:** Government inspection, audit, and acceptance procedures will be enforced at all stages, including source inspection and final acceptance. - **Documentation and Data Submission:** Electronic submission of certification and compliance documentation via WAWF and ECDS will be required for each shipment. **Summary for Contractors** This solicitation represents a highly specialized and critical procurement for a valve disk (poppet) used in essential shipboard systems. Contractors must demonstrate robust quality management systems, proven traceability processes, and the ability to comply with stringent technical, testing, and certification requirements. The contract is governed by national defense priorities and emergency acquisition flexibilities, with government oversight at every stage. Only contractors with established capabilities in manufacturing, quality assurance, and compliance with military and ISO standards should consider responding. All documentation, certifications, and communications must be handled electronically, and no material will be accepted or shipped without prior government approval. For further information or to discuss the opportunity, contact Zachary R. Morrill at NAVSUP WSS MECH.