Lift Truck
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
SLAC Natl Accel Lab -DOE Contractor
Contract Value
Not provided
Codes & Classification
Solicitation Number
SLAC_367782_LiftTruck
NAICS
-
Classification Code
AJ12
Additional Details
Documents4
SLAC National Accelerator Laboratory, operated by Stanford University for the U.S. Department of Energy (DOE), has issued a solicitation for the procurement of a single electric lift truck (forklift) to support its operations in Menlo Park, California. This procurement is managed under SLAC’s DOE-approved purchasing system, which, while not directly subject to the Federal Acquisition Regulations (FAR), is influenced by certain federal laws, executive orders, and regulatory requirements as stipulated by statute and contract terms.
The primary objective of this solicitation is to acquire a counterbalanced, sit-down electric rider lift truck with a nominal capacity of 6,000 lbs at a 24-inch load center. The equipment must meet a comprehensive set of technical specifications, including but not limited to: AC traction and pump motors, advanced vehicle system management, progressive thermal management, fully integrated CANbus communication, on-demand power steering, and a suite of safety and operational features such as the Yale® Continuous Stability System, power assist braking, oil-cooled wet disc brakes, and a fully automatic park brake. The truck must also feature dual drive motors with a “zero turn” steer axle, auto deceleration with regenerative braking, and a multi-functional operator display.
Additional requirements include:
- Operating temperature range from +32°F to +120°F.
- UL Classification Type “E” powertrain with system monitoring and hydraulic indicators.
- Battery compartment dimensions of 33.9" x 40.7" x 31.2".
- A three-stage full free lift mast with a maximum lift height of 187", and a variety of mast and carriage specifications.
- Four-function hydraulic control valve with mechanical lever controls and internally mounted hoses.
- Pneumatic-shaped solid tires (drive and steer), wide tread width, and specified overall dimensions.
- Operator compartment features such as an overhead guard, dual side mirrors, high-mount display, auxiliary power supply, and ergonomic controls.
- Safety and visibility enhancements including LED work lights, an adjustable audible alarm, amber strobe light, and DC-DC converters for accessories.
- The truck must be configured as Li-Ion ready, with a single battery connector under the hood.
The procurement also includes:
- One lithium 80-volt, 420 amp-hour battery.
- One 80-volt lithium fast charger (CA80-800-32OC-LI) with 3-phase 480V input.
Vendors must be located within 50 miles of SLAC and be capable of providing ongoing service and parts support. Delivery of the fully assembled and ready-for-service forklift is required on or before September 30, 2026. All freight charges must be included in the quoted price.
This solicitation is for product supply only; no on-site services are permitted. The selection process will follow the Lowest Priced Technically Acceptable (LPTA) method, with lead time also being a critical factor. Vendors are required to submit price and lead time quotations by August 18, 2026, to Jhamie Serena at [email protected].
Key administrative requirements include:
- Compliance with the Buy American Act for awards exceeding $15,000 per unit.
- Submission of a completed Representations & Certifications Rider (valid for one year).
- Inclusion of Harmonized Tariff Schedule (HTS) codes and Export Control Classification Numbers (ECCN) if applicable.
- Registration in the System for Award Management (SAM.gov).
- If available, a link to a published price list to substantiate quoted prices.
The resulting purchase order will be issued on a fixed-price basis, governed by SLAC’s Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) and the SLAC General Terms and Conditions Supplemental Rider (Aug2026_Rev1). Payment terms are NET-30. For domestic suppliers, freight terms are FOB Destination Prepaid and Add; for foreign suppliers, shipment must be CIP SLAC, Menlo Park, Duty Unpaid.
Contractors are encouraged to indicate any eligibility for additional discounts (e.g., academic, ICPT, GSA, or government institution pricing). Proprietary or confidential information should be clearly marked in responses.
The point of contact for this solicitation is Jhamie Serena, Procurement Commodities Team, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, CA 94025, phone 650-926-2201. The primary administrative contact is Katherine Jill A. Coh ([email protected], 650-926-2770).
This opportunity is classified under Product Service Code AJ12 and is posted on SAM.gov under Opportunity ID ce01da3ffa8a45d38f7cb45524108f55. Interested vendors should carefully review all technical and administrative requirements to ensure alignment with their capabilities and compliance with SLAC and DOE procurement standards.