Sub-Compact Utility Tractor with Front Loader and Turf Tire Package

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QM MICC-FT DRUM

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911S226U3893

NAICS

333111 - Farm Machinery and Equipment Manufacturing

Classification Code

2420

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
The Department of the Army, under the auspices of the Defense Department and managed by the W6QM MICC-FT DRUM contracting office, has issued a combined synopsis/solicitation for the procurement of a Sub-Compact Utility Tractor with a Front Loader and Turf Tire Package. This requirement is classified under NAICS Code 333111 (Farm Machinery and Equipment Manufacturing), with Product Service Code 2420, and is set aside for Small Business Administration (SBA) eligible vendors. The primary objective of this procurement is to acquire a brand-name-or-equal Kubota BX2380 Sub-Compact Utility Tractor package, specifically configured with a front-end loader (Kubota LA344 or equivalent) and heavy-duty turf-safe tires. The intended use of this equipment is for groundskeeping and landscape maintenance in environments where space is limited and where traditional compact tractors may be too large or heavy, potentially causing structural damage to manicured turf and fields. The equipment must be suitable for operation in tight, confined spaces, ensuring minimal impact on sensitive grounds. Key requirements and salient characteristics for the tractor package include: - Engine and Power: The tractor must feature a liquid-cooled, 3-cylinder diesel engine with a minimum of 21.6 gross horsepower (rated up to 23.0 HP). It must have a standard Live Independent PTO system, with rear PTO speed at 540 RPM and mid PTO speed at 2500 RPM, supporting mid-mount mower compatibility. PTO horsepower must be at least 17.7 HP at the shaft. - Drivetrain and Transmission: The unit must offer true four-wheel drive (4WD/4x4) with an operator-controlled rear differential lock. A hydrostatic transmission (HST) with high-low gear shift (minimum two forward and two reverse speed ranges) is required. Maintenance-free wet disc brakes and hydrostatic power steering are also specified. - Hydraulic and Hitch Capabilities: The hydraulic pump must deliver a minimum flow of 6.0 gallons per minute. The rear three-point hitch must be SAE Category I, with a minimum lift capacity of 680 lbs measured 24 inches behind the lift points. - Front Loader Attachment: The tractor must accept a factory-matched, quick-mount front-end loader. The loader bucket should support two-lever quick-attach or pin-on configurations, and hydraulic couplers must be flat-faced and no-spill to prevent oil leakage. Loader lift capacity must be at least 613 lbs at maximum height with a quick-attach bucket, and 739 lbs with a rigid pin-on bucket. Maximum lift height must be at least 70.7 inches at the pivot pin. - Safety, Tires, and Dimensions: The tractor must include a folding Roll-Over Protective Structure (ROPS) for operator safety. Heavy-duty, low-impact turf tires are required to prevent turf destruction; agricultural or industrial tires are not acceptable. The dry weight (with ROPS, excluding loader) must be strictly between 1,430 and 1,445 lbs to prevent field compaction. The turning radius must be 7.5 feet or less (without brakes applied) to facilitate maneuverability in restricted environments. The equipment must be delivered fully assembled, serviced, with fluids topped off, and ready for immediate operation upon receipt. Delivery is FOB Destination. The solicitation is active, with a posting date of July 30, 2026, and responses due by August 7, 2026. Interested parties should direct inquiries to the primary contact, Sarah Long ([email protected]), or the secondary contact, Mark Hill ([email protected]). Further details and updates can be accessed via the official SAM.gov opportunity page at https://sam.gov/opp/dff4b2f799a2493e97c3d17d3685697d/view. Contractors considering this opportunity should ensure their offerings meet all specified technical requirements and are prepared for delivery and assembly as outlined. The scope and requirements are expected to remain constant throughout the contract lifecycle, focusing on the provision of a reliable, turf-safe, sub-compact utility tractor package for ongoing grounds maintenance needs.