BACKHOE

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

W6QM MICC-FT DRUM

Contract Value

Not provided

Codes & Classification
Solicitation Number

W911S226U3834

NAICS

333111 - Farm Machinery and Equipment Manufacturing

Classification Code

3895

Additional Details
Set Aside

SBA

Place of Performance

-

SourceSAM
The Department of the Army, through the Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM), has issued a Combined Synopsis/Solicitation for the procurement of a backhoe, as detailed under procurement identifier W911S226U3834. This opportunity is classified under NAICS code 333111 (Farm Machinery and Equipment Manufacturing, 2022 version) and is set aside for Small Business Administration (SBA) eligible entities, reflecting the Army’s commitment to supporting small business participation in federal contracting. The primary objective of this procurement is to acquire a backhoe that matches or is functionally equivalent to the Case Model FPT F5HFL463A*W. The required equipment must be a diesel-powered, 4-stroke, turbocharged machine with four cylinders and a displacement of 3.4 liters (207 in³). The engine must feature direct, high-pressure common rail (HPCR) fuel injection and deliver a gross horsepower of 74 hp (55 kW) at 2200 RPM, with net horsepower ratings of 72 hp (54 kW) with a viscous fan and 68 hp (51 kW) net. The backhoe must also provide a maximum gross torque of 233 lb-ft (316 Nm) at 1400 RPM, with corresponding net torque values. Key drivetrain specifications include a standard 4F-4R Power Shuttle Synchromesh Transmission with fully synchronized manual gear shifting, specific gear ratios for forward and reverse, and travel speeds ranging from 3.5 mph (5.7 kph) in first gear to 21.1 mph (34.0 kph) in fourth gear (forward, at 2200 RPM with 16.9-28 tires). The machine must be equipped with hydraulic foot-operated service brakes (two per side), a mechanically actuated caliper-type parking brake, and robust front/rear axle configurations with specified differential and planetary hub ratios. Electrical system requirements include a 12-volt, negative ground system, a 120-amp alternator, and an 800 cold-cranking amp battery, with power plugs totaling 10 amps. The operator environment must feature a ROPS/FOPS certified protective canopy, rear fender extensions, an interior rearview convex mirror, and a mechanical suspension seat with 180-degree swivel capability. A critical serviceability requirement is that the backhoe must be able to be serviced by the manufacturer within a 50-mile radius of Fort Bragg, North Carolina, ensuring timely maintenance and minimizing equipment downtime. The procurement is being managed by the Department of Defense, Department of the Army, with Dalvin Autry serving as the primary point of contact. Interested parties may reach Mr. Autry at [email protected] or by phone at 910-908-4559 for further information or clarification. The solicitation was posted on July 27, 2026, and responses are due by August 3, 2026, at 15:08. The opportunity remains active and is accessible via the official SAM.gov portal at https://sam.gov/opp/442f643ab9604988b75692f9e25f9f24/view. Contractors considering this opportunity should ensure their proposed equipment meets or exceeds all specified technical and serviceability requirements, and that they qualify under the SBA set-aside. This procurement represents a straightforward supply contract for a critical piece of equipment, with clear expectations regarding performance, safety, and ongoing support.