PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QZB63

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation (Procurement Identifier: N0010426QZB63) for the supply of a Parts Kit for a 6-inch Ball Valve. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized shipboard valve components. The solicitation is a total small business set-aside, providing an opportunity for qualified small businesses to participate in this critical supply effort. **Purpose and Scope** The primary objective of this procurement is to acquire a Parts Kit for a 6-inch Ball Valve, which is an essential component in a crucial shipboard system. The kit consists of one Ball (Piece 66LI, NAVSEA Drawing 845-8617511) and two mating Seats (Piece 32, NAVSEA Drawing 845-7285297). The integrity and reliability of these parts are paramount, as their failure could result in serious personnel injury, loss of life, or catastrophic damage to shipboard systems or the vessel itself. Consequently, these items are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures. **Key Requirements and Deliverables** Contractors are required to manufacture and deliver the specified parts kit in strict accordance with detailed technical drawings, specifications, and referenced standards. Key requirements include: - **Material and Certification:** The Ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V (ASTM-B367, Grade C-5) titanium, with full quantitative chemical and mechanical analysis. The Seats must be made from DuPont AF DE588 (Teflon Filled Acetal/Delrin), meeting specified ASTM properties. - **Testing and Inspection:** Each Ball must undergo a hydrostatic test at 1050 PSI for 30 minutes (no leakage or deformation), or, if a hydrostatic fixture is unavailable, a dye penetrant inspection per Navy standards. Non-destructive testing is required for welds as applicable. - **Surface Finish and Tolerances:** The Ball’s spherical surface must be finished and polished to precise roughness and waviness standards, with detailed instructions for machining, polishing, and inspection. Seat stack height and dimensional stability must be verified per contract requirements. - **Traceability and Documentation:** Full traceability from raw material to finished product is mandatory, with permanent marking (or tagging for Teflon seats) linking each part to its certification data. Certificates of Compliance and test certifications must be provided, referencing all applicable standards and demonstrating conformance. - **Quality System:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI-Z540.3/ISO-17025. The system and all procedures are subject to government review and audit. - **Welding and Brazing:** Any welding or brazing must be performed by qualified personnel using approved procedures, with prior submission and approval of all qualification data. Special requirements apply for titanium welding and hardfacing. - **Packaging and Delivery:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract instructions. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received. **Contract Administration and Special Considerations** - The solicitation is issued under Emergency Acquisition Flexibilities (EAF) and will result in a bilateral award, requiring written contractor acceptance. - The contract will be DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its priority for national security. - All contractual documents may be transmitted electronically, and the government’s acceptance of the contractor’s proposal constitutes bilateral agreement. - Past performance will be considered in the evaluation of offers. - The procurement is a total small business set-aside, and compliance with small business subcontracting plans and equal opportunity provisions for veterans and workers with disabilities is required. - The use of mercury or mercury-containing compounds is strictly prohibited. - Contractors must ensure that all subcontractors comply with the same quality and traceability requirements, and government source inspection may be performed at subcontractor facilities. **Contracting Entity and Contact Information** - **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), Department of the Navy, Department of Defense - **Location:** Mechanicsburg, PA - **Primary Contact:** Landon A. Switzler, Telephone: 717-605-3228, Email: [email protected] **Response and Submission Details** - **Notice Status:** Active - **Post Date:** July 31, 2026 - **Response Due:** September 8, 2026 - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/a3fdc869372b4da0bad47a0a27734e3c/view) **Summary for Contractors** This solicitation represents a highly controlled and technically demanding procurement for critical shipboard valve components. Contractors must demonstrate robust quality assurance systems, technical capability in precision machining and material certification, and the ability to manage traceability and compliance throughout the supply chain. The opportunity is well-suited for small businesses with experience in defense-grade valve and fitting manufacturing, particularly those familiar with Navy technical standards and documentation requirements. Prospective offerors should carefully review all referenced specifications and ensure their ability to meet the rigorous quality, testing, and certification standards outlined in the solicitation.