NUT, HEX, HEAVY

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFG22

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Classification Code

5310

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech), has issued a solicitation (Procurement Identifier: N0010426QFG22) for the supply of heavy hex nuts, classified under Product Service Code 5310 and NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is critical to the integrity and safety of shipboard systems, with the supplied material designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured). The solicitation is active and responses are due by November 5, 2026. **Purpose and Scope** The primary objective of this procurement is to acquire heavy hex nuts for use in vital shipboard systems. The failure or malfunction of these components could result in catastrophic outcomes, including serious personnel injury, loss of life, or loss of essential shipboard systems. As such, the solicitation invokes stringent quality assurance and traceability requirements to ensure only compliant, high-quality material is delivered. **Key Requirements and Deliverables** - **Technical Specifications:** Heavy hex nuts must conform to Leslie Controls drawings (38650N, item 15 and 36938N, item 9), with material requirements specified as ASTM-A194 Grade 2H or Grade 7. - **Testing and Certification:** Each item must undergo either liquid penetrant or magnetic particle inspection (wet method), performed in accordance with T9074-AS-GIB-010/271 and sampled per MIL-DTL-1222. Certifications for these tests are mandatory. - **Thread Inspection:** All threads must be inspected per FED-STD-H28 series, with ASME B1 series as an acceptable commercial equivalent. Internal threads must be formed by cutting; cold forming is not permitted. - **Traceability:** Complete traceability from material to certification test reports is required. Each shipment must include one additional fastener per uniquely identified heat/lot, with traceability maintained. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Certificate of Compliance:** Contractors must submit certificates certifying compliance with all procurement requirements, including specifications and drawings. - **Quality System:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. Quality system documentation must be available for government review and audit. - **Government Source Inspection:** Government Quality Assurance will be performed at the source, and contractors must notify the appropriate government representative or DCMA office upon receipt of the order. - **Packaging and Marking:** MIL-STD-129 labeling is required for shipping containers. Bulk packaging is authorized with adequate dunnage and thread protectors for externally threaded items. MIL-STD 2073 packaging applies as specified elsewhere in the schedule. - **Mercury-Free Requirement:** Mercury and mercury-containing compounds must not be present in any supplied hardware. - **Data Submission:** Certification documentation must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via Wide Area Work Flow (WAWF). No material may be shipped before acceptance. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Alana M. Boyer (Email: [email protected], Telephone: 717-605-1234) - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/83b4c263c2764a4d9ab9e5199e575ff3/view) **Procurement Type and Special Considerations** - This is a combined solicitation for multiple related items, with awards determined at the CLIN (Contract Line Item Number) level. Multiple awards to different vendors are possible. - Emergency Acquisition Flexibilities (EAF) are invoked, and any resulting contract will be a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. - Packaging requirements for unit and intermediate containers are waived for this contract, but shipping container labeling and bulk packaging requirements remain. - The order is issued pursuant to emergency acquisition needs, reflecting the critical nature of the items. **Constant Elements Throughout Contract Lifecycle** - The requirement for traceability, certification, and compliance with quality assurance standards will remain constant. - Government source inspection and acceptance procedures, as well as the prohibition of mercury, will be enforced throughout the contract. - Configuration control, including the submission of ECPs and waivers/deviations, will be required for any changes. - The quality system and inspection requirements, including documentation and auditability, will persist for the duration of the contract. **Summary for Contractors** Contractors considering this opportunity should have robust capabilities in manufacturing heavy hex nuts to exacting military standards, with established quality assurance systems and experience in traceability and certification for critical safety items. The ability to comply with government source inspection, configuration control, and emergency acquisition requirements is essential. This solicitation represents a high-stakes, technically demanding procurement for components integral to shipboard safety and operational reliability. For further information or to submit a response, contact Alana M. Boyer at [email protected] or visit the solicitation page on SAM.gov.