RETAINER
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QND59
NAICS
339991 - Gasket, Packing, and Sealing Device Manufacturing
Classification Code
5330
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QND59) for the manufacture and delivery of a Retainer component, specifically for use in a Hand Loader Assembly. This procurement is classified under NAICS code 339991 (Gasket, Packing, and Sealing Device Manufacturing) and Product Service Code 5330, indicating its relevance to contractors specializing in the production of gaskets, packing, and sealing devices for critical applications.
**Purpose and Scope**
The Retainer to be procured is a critical component intended for installation in a vital shipboard system. The solicitation underscores the high consequence of failure, as the use of incorrect or defective material could result in serious personnel injury, loss of life, or catastrophic failure of shipboard systems, potentially leading to the loss of the ship itself. As such, the Retainer is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The Retainer must be manufactured in accordance with Vacco Drawing V3D10334, Item 18, with all requirements and modifications as specified in the solicitation. The material specified is SAE AMS-QQ-S-763, Class 304, Condition A stainless steel.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required for the Retainer, with certifications for non-destructive testing (NDT) and intergranular corrosion testing as applicable. All certifications must reference the relevant standards and acceptance criteria.
- **Welding and Brazing:** Any welding or brazing must comply with NAVSEA and MIL standards (S9074-AR-GIB-010A/278, 0900-LP-001-7000, S9074-AQ-GIB-010/248). Procedures and qualification data must be submitted for review and approval prior to execution.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as modified), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to audit and approval.
- **Traceability:** Full traceability from raw material to finished product is mandatory, including unique traceability markings, certification data, and compliance with DI-MISC-81020 requirements. All material must be mercury-free.
- **Documentation:** A Certificate of Compliance is required, certifying that all items meet the procurement document, specifications, and drawings. Test certifications, inspection records, and material certification reports must be submitted and traceable to each item.
- **Packaging:** Preservation, packaging, and marking must comply with MIL-STD-2073 and any additional requirements specified in the contract.
- **Submission and Acceptance:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment. No material is to be shipped before receipt of acceptance. All documentation is to be submitted via Wide Area Work Flow (WAWF).
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department/Agency:** Department of Defense, Department of the Navy
- **Primary Contact:** Zachary R. Morrill, Telephone: 717-605-1552, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/351e71cbe5624f529263d4e3301041f8/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a formal solicitation for a fixed-price supply contract.
- **Set-Aside Requirements:** Not specified in the notice.
- **Emergency Acquisition Flexibilities (EAF):** This requirement is issued under EAF, and the resultant award will be a DO-rated order under the Defense Priorities and Allocations System (DPAS), indicating priority for national defense and emergency preparedness.
- **Bilateral Award:** The contract will be awarded bilaterally, requiring written acceptance from the contractor prior to execution.
- **OEM/Distributor Requirements:** If the offeror is not the Original Equipment Manufacturer (OEM), a signed letter of authorization from the OEM is required.
- **Subcontracting and Flow-Down:** All quality, traceability, and certification requirements must be flowed down to sub-tier suppliers and subcontractors.
**Constant Elements Over Contract Lifecycle**
- The Retainer is a critical safety item (CSI) with rigorous quality, traceability, and compliance requirements that will remain in force throughout the contract.
- The contractor’s quality system, documentation, and traceability procedures are subject to ongoing government oversight and audit.
- All deliverables must be fully certified, traceable, and compliant with the specified standards and drawings.
- No deviations or waivers are permitted without prior government approval, and all changes affecting form, fit, function, or interface require submission of an Engineering Change Proposal (ECP).
**Summary for Contractors**
This opportunity is best suited for manufacturers with demonstrated experience in producing high-reliability, traceable, and fully certified components for defense and shipboard applications. Contractors must have robust quality management systems, the ability to perform and document all required testing and certifications, and the infrastructure to support government audits and source inspections. The contract’s emphasis on traceability, compliance, and configuration control reflects the critical nature of the end-use application. Interested parties should carefully review the technical and quality requirements, ensure their ability to meet all documentation and certification obligations, and be prepared for a rigorous acceptance process prior to shipment.
For further information or to submit a response, contact Zachary R. Morrill at [email protected] or 717-605-1552. The response deadline is November 13, 2026.