ROD,OPERATING
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFG02
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFG02) for the supply of an "Operating Rod" to be used in a critical shipboard system. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, indicating its relevance to contractors specializing in the manufacture of metal valves, pipe fittings, and related components for defense applications.
**Purpose and Scope**
The primary objective of this solicitation is to procure Operating Rods that are integral to the safe and reliable operation of vital shipboard systems. The material covered by this contract is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: any failure or defect could result in serious personnel injury, loss of life, or catastrophic failure of shipboard systems. As such, the procurement invokes stringent quality assurance and control procedures to ensure only fully compliant and traceable material is delivered.
**Key Requirements and Deliverables**
- **Technical Specifications:** The Operating Rod must be manufactured in strict accordance with Naval Sea Systems Command drawing 7068535, item number 62, and associated engineering requirements (ERs) as specified in the solicitation. The material must be QQ-N-286, form 2, annealed and age hardened, finish A, with no weld repairs permitted on QQ-N-286 material.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required for all Operating Rods. Certifications must be provided for annealing and age hardening, and ultrasonic inspection is mandatory for starting material with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified. The Slow Strain Rate Tensile Test must be performed by one of several pre-approved laboratories listed in the solicitation.
- **Traceability and Compliance:** Full traceability from raw material to finished product is required, with unique traceability markings maintained throughout all processing steps, including subcontracted operations. Certification data must be submitted and accepted by Portsmouth Naval Shipyard prior to shipment.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as modified), with calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025. The quality system and all products are subject to government evaluation, verification, and acceptance. Only sources with an acceptable Quality Control Manual are eligible for award.
- **Inspection and Acceptance:** Government Quality Assurance at source is required, and the place of performance may not be changed without authorization. All inspection records must be maintained and made available for government review. Final inspection includes 100% verification of material properties, traceability, and marking.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and any additional requirements specified in the contract.
- **Data Deliverables:** Certificates of compliance, test certifications, and material certification reports must be provided in accordance with specified Contract Data Requirements List (CDRL) items, including DI-MISC-80678, DI-MISC-81020, and DI-QCIC-81110.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS Mech)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected]
- **Location:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance.
**Procurement Type and Special Considerations**
- **Solicitation Type:** This is a combined solicitation for multiple related items (CLINs), with awards potentially made at the CLIN level to multiple vendors. Offerors may submit quotes for any or all CLINs, but should not include quantity discounts across CLINs.
- **Set-Aside:** This procurement is a Total Small Business Set-Aside, restricting competition to qualified small business concerns.
- **DPAS Rating:** Any contract awarded will be a DO-rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use.
- **Compliance and Security:** The solicitation includes clauses for Buy American, Free Trade Agreements, Balance of Payments Program, and security prohibitions/exclusions. Mercury and mercury-containing compounds are strictly prohibited.
- **Past Performance:** NAVSUP WSS Mechanicsburg will consider past performance in the evaluation of offers.
- **Drawings and Data Access:** Access to controlled drawings must be requested via the solicitation page on SAM.gov, with follow-up email to the primary POC.
**Constant Elements Over Contract Lifecycle**
- The criticality of the Operating Rod as a SPECIAL EMPHASIS material for shipboard safety and system integrity.
- The requirement for rigorous quality assurance, traceability, and compliance with all technical, material, and certification standards.
- The necessity for government source inspection, acceptance at Portsmouth Naval Shipyard, and adherence to all specified data submission and packaging protocols.
- The ongoing requirement for a documented and auditable quality system, with government access for review and audit at any time.
- The expectation that all waivers, deviations, and engineering changes are subject to government review and approval.
**Summary for Contractors**
This opportunity is well-suited for small businesses with demonstrated expertise in precision manufacturing of critical metal components for defense applications, robust quality assurance systems, and the ability to manage complex certification and traceability requirements. Contractors must be prepared to comply with all technical specifications, quality standards, and data deliverables, and to coordinate closely with government quality assurance representatives throughout the contract lifecycle. Early and incremental delivery is acceptable at no additional cost, and all contractual documents will be issued electronically. Interested parties should review the full solicitation and associated drawings, and direct any questions to the primary contact listed above.
For further details and to access the solicitation, visit: https://sam.gov/opp/26aa375ff64847cfbcff2bed0f4fc1aa/view