PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFG01
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a Parts Kit for a 4-inch Ball Valve, classified under Product Service Code 4820 (Valves, Nonpowered) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This requirement is designated as a total small business set-aside, inviting qualified small business contractors to submit proposals.
**Purpose and Scope**
The primary purpose of this procurement is to supply a Parts Kit for a 4-inch Ball Valve, intended for use in a critical shipboard system. The kit comprises one Ball (Find Number 4) and two mating Seats (Find Number 5), manufactured in strict accordance with Naval Sea Systems Command Drawing 801-6404584 and all associated specifications and requirements. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to ship safety and operational integrity. Incorrect or defective material could result in catastrophic failure, serious injury, or loss of vital shipboard systems.
**Key Requirements and Deliverables**
- **Materials and Certification:** The Ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified. The Seats must be made from MD71-GG Mearthane (Graphite Filled Urethane), exclusively manufactured by Mearthane Products Inc., Cranston, RI, and must meet defined property values (hardness, specific gravity, tensile strength, compression-deflection, tensile impact, water absorption).
- **Testing and Inspection:** Comprehensive testing and certification are required, including non-destructive tests (weld repair, ultrasonic inspection), hydrostatic testing (or dye penetrant inspection as an alternative), and visual inspection of finished seats. Certifications must reference applicable standards and acceptance criteria.
- **Traceability and Quality Assurance:** Rigorous traceability is mandated, with unique markings on each component to link them to their certification data. The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. All quality system documentation is subject to government review and audit.
- **Configuration Control:** The contractor is responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Welding and Brazing:** When required, welding and brazing must adhere to NAVSEA standards, with procedures and qualification data submitted for approval prior to execution. Certificates of compliance for weld filler metals are required.
- **Packaging and Marking:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Traceability markings must be permanent and applied per MIL-STD-792, except for Teflon seats, which require tagging.
- **Documentation and Submission:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy.
- **Primary Contact:** Nathaniel Ventura, Telephone: 929-602-9222, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/8e2d45b7827c4b96a764e55ab9c3662a/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price contract, with inspection and acceptance at destination.
- **Set-Aside:** Total Small Business Set-Aside, restricting competition to qualified small businesses.
- **DPAS Rating:** Any contract resulting from this solicitation will be a "DO" rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS).
- **Security Requirements:** Access to classified drawings may be required post-award; facility clearance in accordance with FAR 52.204-2 may be necessary.
- **Quality and Compliance:** Higher-level contract quality requirements apply, with government source inspection and mandatory compliance with all invoked standards and specifications.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for traceability, certification, and compliance with all specified standards and drawings will remain unchanged.
- The quality assurance and configuration control procedures, including the submission of ECPs and waivers/deviations, are integral and ongoing.
- The use of WAWF for certification data submission and the prohibition on shipment prior to acceptance are fixed procedural requirements.
- The contract’s critical safety designation and associated special emphasis controls will persist throughout performance.
**Summary for Contractors**
This solicitation represents a highly specialized and safety-critical procurement for the U.S. Navy, requiring strict adherence to technical, quality, and traceability standards. Contractors must demonstrate robust quality systems, experience with critical shipboard components, and the ability to manage complex certification and configuration control requirements. The opportunity is well-suited for small businesses with proven capabilities in metal valve and pipe fitting manufacturing, particularly those familiar with Navy standards and critical safety item protocols.
Interested parties should review the full solicitation and associated drawings and specifications, ensure compliance with all requirements, and direct any questions or requests for access to classified documents to the primary point of contact. Proposals are due by August 31, 2026.