53--SPRING, FAIRING
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426RFF62
NAICS
332613 - Spring Manufacturing
Classification Code
5360
Additional Details
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support Mechanicsburg (WSS MECH), has issued a solicitation (N0010426RFF62) for the procurement of a specialized component identified as "SPRING, FAIRING." This procurement is classified under NAICS code 332613 (Spring Manufacturing) and Product Service Code 5360, and is designated as a total small business set-aside, inviting participation exclusively from qualified small business concerns.
**Purpose and Scope**
The SPRING, FAIRING is a critical component intended for use in a vital shipboard system. The contract explicitly notes that the use of incorrect or defective material could result in catastrophic consequences, including serious personnel injury, loss of life, or the loss of essential shipboard systems or the ship itself. As such, this item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The SPRING, FAIRING must be manufactured in strict accordance with NAVSEA drawing 7106789 P/N 139 and all associated engineering reports, as well as ASTM-B196, C17200, FORM-ROD-TEM TB00. All applicable drawings are referenced in the solicitation and are available via restricted access on SAM.gov.
- **Material Restrictions:** The component must be mercury-free; any intentional addition or contamination with mercury or mercury compounds is grounds for rejection.
- **Configuration and Change Control:** Contractors are required to maintain baseline configuration control and submit any waivers, deviations, or engineering change proposals (ECPs) for government review and approval. All changes affecting form, fit, function, or interface must be processed through formal ECPs.
- **Traceability and Certification:** Full traceability from material to Objective Quality Evidence (OQE) is mandatory. Permanent traceability markings must be applied and maintained throughout all processing steps, including subcontracted operations. A Certificate of Compliance, showing traceability and attesting to full conformance with all requirements, must be submitted with each shipment.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. The quality system and all products are subject to government evaluation, verification, and source inspection by DCMA or other authorized representatives.
- **Inspection and Testing:** The contract requires rigorous inspection and testing, including 100% inspection of OQE and traceability data, and adherence to specified sampling plans (ANSI/ASQ Z1.4 or as otherwise specified). Statistical Process Control (SPC) may be used if it meets government acceptance criteria.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD-2073 and any additional contract-specific requirements.
- **Government Furnished Material/Equipment:** If applicable, contractors must implement documented control procedures for any government-furnished material or equipment, including inspection, storage, and reporting of discrepancies.
- **Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance.
**Contracting and Administrative Details**
- **Contract Type:** Firm Fixed Price.
- **Quantity:** The solicitation has been amended to reduce the required quantity from 300 to 4 units.
- **Award Process:** The resultant contract will be issued bilaterally, requiring written acceptance by the contractor prior to execution. The contract will carry a "DO" priority rating under the Defense Priorities and Allocations System (DPAS), indicating its importance for national defense.
- **Proposal Submission:** Complete, signed proposals must be submitted by the closing date (extended to September 22). Emailed proposals are accepted; NECO quotes and faxed proposals are not.
- **Drawings and Documentation:** All referenced drawings are available via restricted access on SAM.gov. Contractors must request access and notify the point of contact upon doing so.
- **Set-Aside and Compliance:** This is a total small business set-aside. Compliance with various federal regulations is required, including those related to equal opportunity, cybersecurity, and Buy American/Balance of Payments Program.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Ashton K. Perry, [email protected], Telephone: 717-605-7574
- **Notice Status:** Active
- **Response Deadline:** October 20, 2026, 20:10
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/bccc3b4ee9e6487ca60d2ffbfd3abd06/view)
**Special Considerations**
- The item is classified as a Critical Safety Item (CSI), and as such, the contract invokes heightened quality, traceability, and configuration control requirements.
- All waivers, deviations, and engineering changes must be processed through formal channels and are subject to government approval.
- The contract includes a one-year warranty from the date of delivery.
- Government source inspection is required at the contractor’s facility, and any change in place of performance must be authorized by the contracting officer.
- The contract is subject to various federal clauses regarding quality, data rights, cybersecurity, and equal opportunity.
**Summary for Contractors**
This opportunity is highly specialized and best suited for small businesses with demonstrated experience in manufacturing critical shipboard components to exacting military standards. Prospective offerors must have robust quality assurance systems, experience with government traceability and certification requirements, and the capability to manage configuration control and government source inspection. The low quantity and high criticality of the item underscore the importance of precision, compliance, and documentation throughout the contract lifecycle. Interested contractors should carefully review all referenced drawings and specifications, ensure their quality systems are current and documented, and be prepared to submit comprehensive certification and traceability documentation with each delivery.