PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QNC96

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through the Naval Supply Systems Command (NAVSUP) Weapon Systems Support (WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QNC96) for the supply of a Parts Kit for a 1-1/2 inch Ball Valve. This procurement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on specialized shipboard valve components. The solicitation is a total small business set-aside, inviting qualified small business manufacturers and suppliers to participate. **Purpose and Scope** The primary objective of this procurement is to acquire a parts kit comprising one ball (Piece 59) and two matching seats (Piece 19), as specified on Newport News Shipbuilding Drawings 255582 and 255584, respectively. These components are intended for use in a critical shipboard system, where material failure could result in severe consequences, including personnel injury, loss of life, or loss of vital shipboard systems. As such, the items are designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and certification procedures to ensure the highest standards of quality and traceability. **Key Requirements and Deliverables** Contractors are required to supply the specified parts kit, ensuring full compliance with all referenced drawings, specifications, and quality assurance provisions. Key technical requirements include: - **Material Specifications:** - The ball must be manufactured from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5 titanium alloy, with mechanical properties as specified. - The seats must be fabricated from Delrin (Dupont AF DE588, Teflon Filled Acetal) and meet detailed physical and mechanical property requirements, including specific gravity, melting point, tensile strength, compressive stress, water absorption, hardness, Teflon fiber content, and dimensional stability. - **Testing and Certification:** - Quantitative chemical and mechanical analysis is required for all parts. - Each ball must undergo a hydrostatic test (30 minutes at 1050 PSI with stem hole plugged) or, alternatively, dye penetrant inspection, with acceptance criteria as specified. - Non-destructive testing is required for weld repairs and production welds, as applicable. - Certification of all tests and inspections must be provided, referencing applicable standards and acceptance criteria. - **Quality Assurance and Traceability:** - Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. - Full traceability from raw material to finished product is mandatory, with permanent marking or tagging of parts as specified. - Certificates of Compliance (C of C) must be submitted, demonstrating conformance to all requirements and traceability to material certifications. - **Packaging and Delivery:** - Preservation, packaging, and marking must comply with MIL-STD-2073 and contract-specific instructions. - Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, via the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance is received. - **Configuration Control and Change Management:** - Contractors are responsible for maintaining the equipment baseline configuration and must submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - All waivers and deviations require prior approval from the Contracting Officer. - **Special Considerations:** - Mercury and mercury-containing compounds are strictly prohibited. - The contract is DO certified for national defense under the Defense Priorities and Allocations System (DPAS), indicating its priority for national defense and emergency preparedness. - Government Source Inspection (GSI) at the contractor’s facility is required, and the place of performance may not be changed without authorization. **Contracting Entity and Contact Information** The contracting activity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of the Navy. The primary point of contact for this solicitation is Heather R. Jones, who can be reached at 717-605-4866 or via email at [email protected]. **Procurement Process and Timeline** This solicitation is issued under Emergency Acquisition Flexibilities (EAF) and will be awarded bilaterally, requiring written acceptance from the selected contractor. All contractual documents will be considered issued upon electronic transmission or mailing. The solicitation response deadline has been extended to August 28, 2026. **Summary for Contractors** This opportunity is well-suited for small businesses with demonstrated expertise in precision manufacturing of critical shipboard valve components, robust quality assurance systems, and the ability to meet rigorous material, testing, and traceability requirements. Contractors must be prepared to manage detailed documentation, certification, and configuration control processes, and to interface with government quality assurance representatives throughout the contract lifecycle. The work supports national defense priorities and requires strict adherence to all technical, quality, and administrative requirements as outlined in the solicitation and referenced documents. Interested parties should review the full solicitation and associated technical data, available via the SAM.gov opportunity listing (https://sam.gov/opp/a40726b338b242a7b68cb329b8655e39/view), and direct any questions or requests for drawing access to the listed point of contact.