PARTS KIT,BALL VALV

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QND00

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4820

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation for the procurement of a Parts Kit for a 10-inch Ball Valve, under solicitation number N0010426QND00. This requirement is classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820, reflecting its focus on critical shipboard valve components. The solicitation is currently active, with responses due by August 27, 2026. **Purpose and Scope** The primary purpose of this procurement is to supply a Parts Kit for a 10-inch Ball Valve, consisting of one Ball (piece 3) and two mating Seats (piece 6). These components are integral to a crucial shipboard system, where the use of incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, the material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), invoking stringent control procedures to ensure the receipt of correct and fully compliant material. **Key Requirements and Objectives** The kit must be manufactured in accordance with Naval Ship Systems Drawing 4385051 and General Notes Drawing 4384678, with all requirements amplified or modified as specified in the solicitation. The Ball must be made from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as specified. The Seats must be fabricated from Dupont AF DE588 (Teflon Filled Acetal/Delrin), meeting detailed property requirements (specific gravity, melting point, tensile strength, impact, compressive stress, water absorption, hardness, Teflon fiber content, and dimensional change). Certifications for quantitative chemical and mechanical analysis are required for the Ball, and test reports for each heat/lot/batch of seat material must be provided. Non-destructive testing certifications are required for weld repairs and production welds, with acceptance per applicable fabrication specifications. Surface finish and waviness requirements for the Ball are highly specific, including machine finishing, polishing, and grit blasting procedures, with final surface finish between RHR 12 and RHR 16. Seats must be visually inspected and measured for stack height tolerance, with acceptance criteria per referenced documents. Welding and brazing must comply with NAVSEA standards, and all personnel and procedures must be qualified and approved prior to execution. Certificates of compliance, traceability, and configuration control are mandatory, with all waivers, deviations, and engineering change proposals subject to review and approval by the Contracting Officer. **Quality Assurance and Traceability** The contractor must maintain a quality system in accordance with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is required, and the contractor’s quality system is subject to audit and review throughout the contract lifecycle. Inspection records, traceability markings, and certification data must be maintained and made available for government review. Material traceability is critical, with unique markings required for all components, and certification data must be directly linked to these markings. Permanent marking methods are specified, with alternate methods allowed for precision machined or plated surfaces. Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF), and no material may be shipped prior to receipt of acceptance. **Packaging and Delivery** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and the contract schedule. The solicitation specifies FOB Destination, ensuring delivery to the designated government facility. **Contracting Entity and Contact Information** The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Heather R. Jones, who can be reached at 717-605-4866 or via email at [email protected]. **Procurement Type and Set-Aside** This solicitation is a total small business set-aside, in accordance with current Department of Defense regulations. Emergency Acquisition Flexibilities (EAF) are invoked, and the resultant award will be issued bilaterally, requiring written acceptance by the contractor. The contract will be DX/DO certified for national defense under the Defense Priorities and Allocations System (DPAS), reflecting its criticality to national defense and emergency preparedness. **Special Considerations** - Past performance will be considered in the evaluation of offers. - Access to drawings may require request and approval via SAM.gov and the listed POC. - All contractual documents are considered "issued" when transmitted by mail, facsimile, or electronic methods. - Contractors must ensure compliance with Buy American, Free Trade Agreements, and Balance of Payments Program requirements. - Mercury and mercury-containing compounds are strictly prohibited. - Subcontractor inspection and quality assurance requirements are extensive, with government rights to inspect at source. - All material certifications, traceability, and compliance documentation must be positive, unqualified, and directly linked to the supplied material. **Constant Elements Throughout Contract Lifecycle** The requirements for material traceability, quality assurance, certification, configuration control, and compliance with referenced standards and drawings will remain constant throughout the contract lifecycle. The critical safety designation, government inspection, and acceptance procedures, as well as packaging and marking requirements, are enduring elements of this procurement. **Summary for Contractors** Contractors considering this opportunity must have robust capabilities in precision manufacturing, quality assurance, traceability, and compliance with stringent naval and military standards. The solicitation demands meticulous attention to material properties, certification, and documentation, as well as the ability to support government audits and inspections. Only contractors with proven experience in supplying critical shipboard components, maintaining comprehensive quality systems, and managing complex certification and traceability requirements should pursue this opportunity. For further details and to access the solicitation, visit the official SAM.gov notice at: https://sam.gov/opp/8b1af6aa969f478d9e30fd60f8c14fbb/view