PARTS KIT,BALL VALV
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QND02
NAICS
332919 - Other Metal Valve and Pipe Fitting Manufacturing
Classification Code
4820
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (N0010426QND02) for the procurement of a Parts Kit for Ball Valves, classified under NAICS code 332919 (Other Metal Valve and Pipe Fitting Manufacturing) and Product Service Code 4820. This requirement is designated as a total small business set-aside, inviting qualified small business contractors to participate.
**Purpose and Scope**
The primary objective of this procurement is to refurbish and supply a critical Parts Kit for Ball Valves used in essential shipboard systems. The material covered by this contract is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), reflecting its criticality to ship safety and operational integrity. The use of incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, stringent quality assurance and traceability requirements are invoked to ensure the delivery of conforming, high-reliability components.
**Key Requirements and Deliverables**
Contractors are required to inspect, refurbish, and supply ball valve components in strict accordance with NAVSEA drawings 8617511 (for the ball, piece 68L1) and 7285297 (for two mating seats, piece 28), as well as all referenced specifications and standards. The scope includes:
- **Inspection and Refurbishment:** All assemblies must be disassembled, cleaned, and inspected to determine refurbishment feasibility. Traceability of all parts and markings must be maintained throughout the process.
- **Material and Certification:** The ball must be fabricated from SAE-AMS-6931 or centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with specified mechanical properties. Seats must be manufactured from MD71-GG Mearthane (Graphite Filled Urethane) produced by Mearthane Products Inc., Cranston, RI, and must meet detailed physical property requirements.
- **Marking and Traceability:** All parts must be permanently marked with traceability codes, heat/lot numbers, or unique contractor identifiers, in accordance with MIL-STD-792 and contract requirements. Certification data must be directly traceable to these markings.
- **Testing and Compliance:** Contractors must provide quantitative chemical and mechanical analysis for all parts requiring certification, as well as certifications for non-destructive testing (NDT) and welds, where applicable. All certifications must reference the applicable standards and acceptance criteria.
- **Quality Assurance:** A robust quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate) and calibration systems per ISO-10012 or ANSI-Z540.3 with ISO-17025 is required. The contractor’s quality system and procedures are subject to government review, audit, and approval.
- **Packaging and Delivery:** Preservation, packaging, and marking must comply with MIL-STD-2073 and contract schedule requirements. All certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before formal acceptance is received.
**Contract Administration and Special Considerations**
- **Emergency Acquisition Flexibilities (EAF):** This requirement is processed under EAF, and the resultant award will be issued bilaterally, requiring written contractor acceptance.
- **Defense Priorities and Allocations System (DPAS):** The contract will be DO certified for national defense, indicating priority handling.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface.
- **Subcontractor Oversight:** The prime contractor is responsible for ensuring all sub-tier suppliers meet contract requirements, including periodic audits and flow-down of quality and traceability requirements.
- **Mercury-Free Requirement:** No mercury or mercury-containing compounds may be used or come into contact with supplied hardware.
- **Government Source Inspection (GSI):** Government quality assurance at source is required, and the place of performance may not be changed without contracting officer authorization.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), Department of the Navy, Department of Defense
- **Primary Contact:** Heather R. Jones, Telephone: 717-605-4866, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/dff4bd546f704cd6bee67a6ebf47dd0e/view)
**Response and Submission Details**
- **Solicitation Close Date:** Extended to 21 September 2026
- **Set-Aside:** Total Small Business
- **Submission Requirements:** All contractual documents and certifications must be submitted electronically as specified. Access to drawings may require request and approval via SAM.gov and coordination with the listed point of contact.
**Summary**
This solicitation represents a highly controlled, technically demanding opportunity for small business manufacturers with expertise in precision metal and polymer component manufacturing, traceability, and quality assurance for critical shipboard systems. Contractors must demonstrate robust quality systems, experience with Level I/SUBSAFE material, and the ability to manage complex certification and traceability requirements. The contract’s focus on configuration control, government source inspection, and compliance with national defense priorities underscores the importance of reliability and accountability throughout the contract lifecycle.