SHAFT,INTERLOCK
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFF90
NAICS
333613 - Mechanical Power Transmission Equipment Manufacturing
Classification Code
3040
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFF90) for the manufacture and delivery of a "Shaft, Interlock" component. This procurement is classified under NAICS code 333613 (Mechanical Power Transmission Equipment Manufacturing) and Product Service Code 3040, indicating its relevance to contractors specializing in mechanical power transmission equipment for defense applications.
**Purpose, Scope, and Intended Outcomes**
The primary objective of this solicitation is to acquire a Shaft, Interlock, which is a critical component intended for use in a crucial shipboard system. The nature of this part is such that any failure, defect, or use of incorrect material could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of vital shipboard systems. As a result, the item is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured), invoking stringent control and quality assurance procedures to ensure the delivery of correct and fully compliant material.
**Key Requirements, Objectives, and Deliverables**
- **Manufacturing Specifications:** The Shaft, Interlock must be produced in strict accordance with NAVSEA Drawing number 7106787, item 104, with specific material requirements (ASTM B139, Alloy C51000, Temper H04) and detailed thread formation and inspection standards. All internal threads must be cut (not cold-formed), and thread inspection must comply with FED-STD-H28 or ASME B1 series as appropriate.
- **Quality Assurance:** The contractor must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012, ANSI-Z540.3, and ISO-17025. The quality system and all products are subject to government evaluation, verification, and acceptance.
- **Traceability and Certification:** Full traceability from material to Objective Quality Evidence (OQE) is mandatory. Permanent traceability markings must be applied and maintained throughout all processing steps, including subcontracted operations. A Certificate of Compliance is required, certifying adherence to all specifications and requirements, and must include detailed traceability information.
- **Inspection and Testing:** The contractor is responsible for comprehensive inspection and testing, including form, fit, and function checks, with lot acceptance based on zero defects. All OQE and traceability data must be 100% inspected for completeness and legibility.
- **Configuration Control:** The contractor must maintain the equipment baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. All waivers and deviations require prior government approval.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and any additional requirements specified in the contract schedule.
- **Government Source Inspection:** Government Quality Assurance at source is required, and the place of performance may not be changed without authorization. The contractor must notify the appropriate government representative or DCMA office upon receipt of the order.
- **Data Submission:** Certification data must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before receipt of acceptance.
**Contracting Entity and Contact Information**
- **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of the Navy, Department of Defense.
- **Primary Contact:** Ashton K. Perry, Telephone: 717-605-7574, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/4c1a14e44ed04b099bf349992048a532/view)
**Procurement Type, Set-Aside, and Special Considerations**
- **Procurement Type:** This is a fixed-price supply contract solicitation.
- **Set-Aside:** The opportunity is a Total Small Business Set-Aside, restricting competition to qualified small business concerns.
- **Special Considerations:** The contract is rated under the Defense Priorities and Allocations System (DPAS) for national defense, emergency preparedness, and energy program use. The item is classified as a Critical Safety Item (CSI), requiring heightened quality and traceability controls. Mercury and mercury-containing compounds are strictly prohibited in the manufacturing process.
**Constant Elements Over the Contract Lifecycle**
Throughout the contract, the following elements will remain constant:
- The requirement for strict adherence to technical drawings, specifications, and quality assurance standards.
- The necessity for full material traceability and comprehensive certification.
- The obligation to maintain configuration control and submit any changes for government approval.
- The need for government source inspection and compliance with all packaging and data submission protocols.
- The contract’s status as a small business set-aside and its critical role in supporting national defense priorities.
**Summary for Contractors**
This solicitation represents a highly controlled, technically demanding procurement for a critical shipboard component. Contractors must demonstrate robust quality management systems, experience with defense-grade mechanical manufacturing, and the ability to maintain rigorous traceability and certification standards. The opportunity is well-suited for small businesses with proven capabilities in precision manufacturing, quality assurance, and compliance with military specifications. Interested parties should review the full solicitation and associated drawings (requestable via SAM.gov) and ensure their ability to meet all technical, quality, and administrative requirements before responding.
**Key Dates**
- **Post Date:** July 28, 2026
- **Response Due:** August 31, 2026
For further information or to request access to drawings, contact Ashton K. Perry at the details provided above.