Hopper Spreader
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W6QM MICC-FT DRUM
Contract Value
Not provided
Codes & Classification
Solicitation Number
W911S226U3764
NAICS
333120 - Construction Machinery Manufacturing
Classification Code
3805
Additional Details
The Department of the Army, through the Mission and Installation Contracting Command at Fort Drum (W6QM MICC-FT DRUM), has issued a Combined Synopsis/Solicitation for the procurement of a 2026 or newer SaltDogg model 14514F570121 hopper spreader, or an equivalent unit, under procurement identifier W911S226U3764. This opportunity is classified under NAICS code 333120 (Construction Machinery Manufacturing) and Product Service Code 3805, and is set aside for Small Business Administration (SBA) eligible vendors.
The primary objective of this procurement is to acquire a high-capacity, durable hopper spreader for use with specific dump truck models at Fort Hood, Texas (ZIP 76544). The spreader will be utilized for the efficient distribution of bulk salt, sand, or salt/sand mixtures, supporting road maintenance and operational readiness.
Key requirements for the hopper spreader include:
- A capacity of 9 to 10 cubic yards, with a hopper constructed from 304 stainless steel, measuring 14 feet in length and 57 inches in width.
- A pintle chain conveyor system approximately 24.5 inches wide (with 3/8-inch crossbars), featuring an inverted V design to reduce stress, and a stainless steel conveyor floor.
- Electric drive system powered by a 12V DC motor (1/2 HP), with independent motors for the conveyor and spinner, and in-cab controls allowing variable speed adjustment for both components.
- Adjustable feedgate with lock pin, and adjustable chute and baffles to tailor material spread.
- Robust construction, including 10-gauge steel floor sheets, 3-inch structural channel floor supports (16 inches on-center), 12-gauge steel exterior posts (5-inch formed posts at 36–48 inches), and 3-inch structural channel interior posts at 16-inch spacing.
- Inclusion of a spreader stand for removal, a top screen, and compatibility with dump body installations.
- The spreader must be installed within 100 miles of Fort Hood, TX, and is intended for use on specified Freightliner 114SD trucks with West Mark dump beds (VINs: 1FVHG3FM0PHUM8989 and 3ALHG3FM9SDVM6790).
Expected deliverables encompass:
- Delivery of the hopper spreader to the installation location, including off-loading.
- Complete installation of the spreader on the designated vehicles.
- Delivery and off-loading of spreader stands to the end user location at Fort Hood.
- Up to two hours of onsite training for personnel at the end user’s location.
The procurement is being managed by the Department of Defense, Department of the Army, with Arthur West serving as the primary point of contact ([email protected], 254-287-1574). The solicitation was posted on July 21, 2026, with responses due by July 27, 2026. The opportunity remains active and is accessible via the SAM.gov portal at https://sam.gov/opp/1d18e4799ef443769197a083d3ccbf95/view.
Contractors considering this opportunity should ensure their offerings meet or exceed the specified technical requirements, are capable of providing installation and training within the required geographic area, and are eligible under the SBA set-aside. The scope and deliverables are clearly defined and are expected to remain consistent throughout the contract lifecycle, focusing on the delivery, installation, and operational training for a high-quality hopper spreader system.