S351 and S354 Dam Gate Seal Assembly Sets
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
W074 ENDIST JACKSNVLLE
Contract Value
Not provided
Codes & Classification
Solicitation Number
W19EP26QA015
NAICS
325212 - Synthetic Rubber Manufacturing
Classification Code
5330
Additional Details
The U.S. Army Corps of Engineers (USACE), Jacksonville District, has issued a combined synopsis/solicitation (Solicitation Number: W19EP26QA015) for the procurement of S351 and S354 Dam Gate Seal Assembly Sets. This opportunity is classified under Product Service Code 5330 and NAICS Code 325212 (Synthetic Rubber Manufacturing), and is open to all qualified vendors, as there is no set-aside for this acquisition.
**Purpose and Scope**
The primary objective of this procurement is to supply a total of five (5) specialized dam gate seal assembly sets—three (3) S351 Seal Sets and two (2) S354 Seal Sets—for use at a USACE facility in Clewiston, Florida. These seals are critical components designed to ensure the integrity and operational reliability of dam gates, preventing water leakage and maintaining structural safety.
**Key Requirements and Deliverables**
Vendors are required to manufacture and deliver the following items:
- **S351 Seal Set (Qty: 3):** Each set is a rectangular assembly measuring 20 feet 9-3/4 inches wide by 8 feet high. The top and side seals must be molded J-Bulb type (1-3/4" diameter bulb x 9/16" tail x 5-1/8" overall width), and the bottom seal must be a molded flat seal (1" thick x 4" overall width). Features include 1/16" PTFE cladding (180° coverage) on top and side seals, VOSB molded corners, and hot factory vulcanize splicing to size.
- **S354 Seal Set (Qty: 2):** Each set is a rectangular assembly measuring 24 feet 2 inches wide by 8 feet 9-5/8 inches high. The top and side seals are molded J-Bulb type (1-3/4" diameter bulb x 9/16" tail x 5" overall width), and the bottom seal is a molded flat seal (1" thick x 4" overall width). These also require 1/16" PTFE cladding (180° coverage) on top and side seals, VOSB molded corners, and hot factory vulcanize splicing to size.
**Material and Performance Specifications:**
- Durometer: 60-70
- Tensile Strength: 3000 PSI
- Elongation: Minimum 450%
- 300% Modulus: 900 PSI
- Compression Set: 30%
- Water Absorption: 5%
- Low Temperature Brittleness: All pass (no cracks)
**Execution, Packaging, and Logistics:**
- All seals must be fabricated without bolt holes, as per USACE requirements.
- Finished seals are to be securely packaged in protective wooden crates to ensure safe transit and prevent damage.
- Delivery is to be made to 525 Ridgelawn Rd., Clewiston, FL 33440.
- USACE will provide detailed reference drawings to the selected vendor to ensure precise molding and splicing.
**Contracting Entity and Contact Information**
The contracting activity is managed by the U.S. Army Corps of Engineers, Jacksonville District (W074 ENDIST JACKSNVLLE), under the Department of the Army, Department of Defense. The primary point of contact for this solicitation is Contract Specialist Kelly Koger ([email protected]), with Contracting Officer Dustin L. Furrey ([email protected]) as the secondary contact.
**Procurement Process and Timeline**
This solicitation is issued as a Request for Quotation (RFQ) for commercial items, following the format in Revolutionary FAR Overhaul (RFO) part 12. All interested vendors must submit questions by July 24, 2026, at 9:00 AM EST. Final quotations are due by July 31, 2026, at 9:00 AM EST. The solicitation and all related documents are available via SAM.gov (Opportunity ID: 53562f4607de44b199edfdd4772dca40).
**Special Considerations**
- There are no set-aside restrictions; the opportunity is open to all qualified vendors.
- Strict adherence to the technical specifications and fabrication constraints is mandatory.
- The contract requires specialized manufacturing capabilities in synthetic rubber products, with experience in producing large, custom-molded seal assemblies for critical infrastructure applications.
**Summary**
This procurement represents a specialized opportunity for manufacturers with expertise in synthetic rubber fabrication and custom seal assembly production. The successful contractor will be responsible for delivering high-performance, precisely fabricated dam gate seal sets that meet stringent USACE specifications, ensuring the continued safety and functionality of critical water control infrastructure in Florida.
Documents6