STUD,CONTINUOUS THD
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFF61
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5307
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (N0010426QFF61) for the supply of "STUD, CONTINUOUS THD" (continuous thread studs) under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing). This procurement is classified under Product Service Code 5307 and is a critical requirement for shipboard systems, designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured). The solicitation is a total small business set-aside, inviting offers from qualified small business manufacturers capable of meeting stringent technical and quality assurance requirements.
**Purpose and Scope**
The studs procured under this solicitation are intended for use in vital shipboard systems where material failure could result in catastrophic consequences, including serious personnel injury, loss of life, or loss of shipboard systems. As such, the procurement invokes special control procedures to ensure the delivery of correct, defect-free material. The scope covers the manufacture, inspection, testing, certification, and delivery of continuous thread studs in accordance with detailed military and industry specifications.
**Key Requirements and Deliverables**
- **Technical Specifications:** The studs must conform to MIL-DTL-1222, with specific requirements for configuration (stud, Type IV), grade (500, QQ-N-286), condition (solution annealed and age hardened), size (5/8 inch), length (either 4 inches or 2 5/8 inches as specified per CLIN), thread series (11 UNC), class of fit (3A), and chamfered end configuration. Substitution of material grades is not permitted without Contracting Officer approval.
- **Testing and Certification:** Certifications are required for liquid penetrant inspection (per T9074-AS-GIB-010/271 and MIL-DTL-1222), annealing and age hardening (QQ-N-286), and ultrasonic inspection on starting material (for items made from QQ-N-286 with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as otherwise specified). All certifications must be traceable to the material and lot.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO 9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO 10012 or ANSI/NCSL Z540.3 and ISO/IEC 17025. Government Quality Assurance (GQA) at source is required, and the contractor’s quality system is subject to government review and audit.
- **Traceability:** Complete traceability from raw material to finished product is mandatory. Each shipment must include one additional fastener per heat/lot for traceability verification.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any changes affecting form, fit, function, or interface. All waivers and deviations require Contracting Officer approval.
- **Packaging and Marking:** While unit and intermediate packaging requirements are waived for this contract, shipping containers must be labeled per MIL-STD-129, and bulk packaging is authorized with adequate dunnage. Thread protectors are required on all externally threaded materials to prevent damage.
- **Data and Documentation:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, via Wide Area Workflow (WAWF). No material may be shipped before acceptance is received.
- **Warranty:** A one-year warranty from the date of delivery is required for all supplied items.
- **Special Considerations:** Mercury and mercury-containing compounds are strictly prohibited. The order is "DO" rated under the Defense Priorities and Allocations System (DPAS) for national defense use and is issued under Emergency Acquisition Flexibilities (EAF).
**Procurement Structure and Process**
- This solicitation is a combined solicitation for multiple related items (CLINs). Awards may be made at the CLIN level, potentially resulting in multiple awards to different vendors. Offerors may quote on any or all CLINs but should not include quantity discounts for combined CLINs.
- The closing date for responses is August 21, 2026.
- The procurement is a total small business set-aside, and compliance with the Buy American Act, Free Trade Agreements, and Balance of Payments Program is required.
- The opportunity is posted on SAM.gov (Opportunity ID: c9b3a1a65c7a4b39b7ff213c207f1872).
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH)
- **Department:** Department of Defense, Department of the Navy
- **Primary Contact:** Alana M. Boyer, Email: [email protected], Telephone: 717-605-1234
- **Ship to/Inspect/Accept by:** Portsmouth Naval Shipyard (DODAAC N50286), with inspection and acceptance by N39040
**Constant Elements Throughout Contract Lifecycle**
- The requirement for strict adherence to technical specifications, traceability, and quality assurance will remain unchanged.
- All certifications, documentation, and configuration control processes must be maintained and available for government review.
- The contract will continue to require compliance with all applicable laws, regulations, and referenced standards.
- The "DO" rated order status and emergency acquisition flexibilities will apply throughout the contract period.
**Summary for Contractors**
This opportunity is suited for small business manufacturers with demonstrated experience in producing high-reliability, traceable fasteners for critical defense applications. Contractors must have robust quality systems, the ability to perform and document specialized testing, and the capacity to manage configuration and traceability requirements. The contract’s emphasis on certification, government source inspection, and configuration control reflects the critical nature of the end-use application. Interested parties should carefully review the referenced specifications and ensure their processes and documentation can meet the Navy’s stringent requirements.
For further details and to access the full solicitation, visit the SAM.gov opportunity page: https://sam.gov/opp/c9b3a1a65c7a4b39b7ff213c207f1872/view.