LINK
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFF14
NAICS
333613 - Mechanical Power Transmission Equipment Manufacturing
Classification Code
3040
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg, has issued a solicitation (Procurement Identifier: N0010426QFF14) for the manufacture and supply of a "Link" component, classified under NAICS Code 333613 (Mechanical Power Transmission Equipment Manufacturing) and Product Service Code 3040. This procurement is a total small business set-aside, inviting qualified small business contractors to participate.
**Purpose and Scope**
The material covered by this contract is intended for use in a crucial shipboard system, designated as "Special Emphasis Material" (Level I, Scope of Certification, or Quality Assured). The integrity of this component is vital; incorrect or defective material could result in catastrophic failure, including serious personnel injury, loss of life, loss of vital shipboard systems, or even the loss of the ship itself. As such, the procurement invokes rigorous control procedures to ensure the receipt of correct and fully compliant material.
**Key Requirements and Objectives**
- **Technical Specifications:** The "Link" must be manufactured in accordance with Naval Sea Systems Command Drawing 751-6402629 and DN6402629A1, Find No. 1, with specific amplifications and modifications as detailed in the solicitation. No weld repair is permitted on QQ-N-286 material.
- **Material and Testing:** The required material is QQ-N-286, Form 2, cold drawn or hot finished, annealed and age hardened. Quantitative chemical and mechanical analysis is mandatory, and certifications must be provided for annealing, age hardening, ultrasonic inspection (for starting material ≥4 inches diameter or as specified), and dye penetrant inspection (100% coverage after final machining).
- **Testing Laboratories:** Slow strain rate tensile tests must be performed by one of several specified laboratories, including Huntington Alloys, Metallurgical Consultants, Naval Surface Warfare Center Carderock Division, Teledyne Allvac, Westmoreland Mechanical Testing, Mannesmann Rohrenwerke, and ThyssenKrupp VDM USA.
- **Configuration Control:** Contractors must maintain the total equipment baseline configuration and provide proprietary design drawings in electronic format. All waivers and deviations require review and approval by the Contracting Officer, with detailed documentation.
- **Certification and Traceability:** A certificate of compliance is required, certifying full adherence to all specifications and drawings. Traceability from material to certification test reports and Objective Quality Evidence (OQE) is mandatory, with unique traceability markings applied to the material.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025, or MIL-I-45208 with MIL-STD calibration requirements. The system is subject to government evaluation, verification, and audit. Suppliers of Level I/SUBSAFE material must submit documented quality system procedures prior to award unless already on file.
- **Inspection and Acceptance:** Government Quality Assurance will be performed at the source, and the place of performance cannot be changed without authorization. All inspection records must be traceable, and subcontractor inspection requirements are extensive, including periodic audits and compliance verification.
- **Material Handling and Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. Mercury and mercury-containing compounds are strictly prohibited.
- **Data Submission and Payment:** Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment, using the Wide Area Work Flow (WAWF) system. No material may be shipped before acceptance.
**Contracting Entity and Contact Information**
- **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), a federal office under the Department of Defense, Department of the Navy.
- **Location:** Mechanicsburg, Pennsylvania.
- **Primary Contact:** Christian M. Valdez, Telephone: 717-605-3229, Email: [email protected].
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/5bff4182cb7541bdb097e0eca8d43fc3/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price contract.
- **Set-Aside:** Total small business set-aside.
- **Priority Rating:** Any contract awarded will be a DO rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS).
- **Evaluation Criteria:** Past performance will be considered in accordance with FAR 13.106(a)(2) and DFARS 252.213-7000.
- **Emergency Acquisition Flexibilities:** This order is issued pursuant to Emergency Acquisition Flexibilities (EAF).
**Constant Elements Throughout Contract Lifecycle**
- The requirement for rigorous quality assurance, traceability, and certification will remain constant.
- The use of specified laboratories for testing, adherence to technical drawings and specifications, and compliance with government inspection and acceptance procedures are ongoing obligations.
- The prohibition of mercury, strict material handling, and packaging standards, and the use of WAWF for data submission and payment will persist throughout the contract.
- Configuration control, waiver/deviation procedures, and engineering change proposal requirements will be enforced for any modifications.
**Summary for Contractors**
This solicitation represents a highly specialized and critical manufacturing opportunity for small businesses with expertise in mechanical power transmission equipment, particularly those capable of meeting stringent Navy requirements for Level I/SUBSAFE material. Contractors must demonstrate robust quality systems, traceability, and compliance with detailed technical and certification standards. The contract is DO rated for national defense, and all deliverables must be accepted by Portsmouth Naval Shipyard prior to shipment. Interested parties should review the full solicitation and ensure their capabilities align with the technical, quality, and compliance requirements outlined.
For further information or to submit questions, contact Christian M. Valdez at the details provided above. The response deadline is August 17, 2026.