SCREW CAP DR HD
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFF43
NAICS
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing
Classification Code
5305
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation (Procurement Identifier: N0010426QFF43) for the supply of a specialized item: Screw Cap Drive Head. This procurement is classified under NAICS Code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) and Product Service Code 5305, indicating its focus on fastener manufacturing for critical shipboard applications.
**Purpose and Scope**
The primary purpose of this procurement is to acquire Screw Cap Drive Head fasteners for use in crucial shipboard systems. The material is designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured), reflecting its criticality: incorrect or defective material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent control procedures to ensure the correct material is received and installed.
**Key Requirements and Objectives**
The solicitation outlines comprehensive technical and quality requirements:
- **Manufacture and Design:** The fasteners must conform to MIL-DTL-1222, with specific requirements for grade (A574 per ASTM-A574), condition (hardened and tempered), size (1/2 inch diameter, 3 inches length), thread series (20), class of fit (UNRF), and end configuration (3A). Fasteners must be modified to include six lockwire holes per ASME B18.3.
- **Testing and Certification:** Certifications are required for liquid penetrant or magnetic particle inspection, wedge tensile tests, and full traceability of each fastener lot. Additional testing per applicable specifications is required, and all certifications must reference the relevant standards and acceptance criteria.
- **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government Quality Assurance at source is mandated, and the contractor’s quality system is subject to audit and review.
- **Traceability:** Complete traceability from material to certification test reports and Objective Quality Evidence (OQE) is required. Each fastener must be uniquely marked for traceability, and marking must be permanent and legible after protective coating.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Certificate of Compliance:** A certificate of compliance must be submitted, showing traceability to the marking applied on each item and certifying full compliance with all specifications and requirements.
- **Mercury-Free:** No mercury or mercury-containing compounds may be present or come into contact with supplied hardware.
- **Material Handling and Receiving Inspection:** Procedures must ensure segregation, traceability, and inspection of all materials, including those sent for subcontracted operations.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
**Contracting Entity and Location**
The contracting entity is NAVSUP Weapon Systems Support Mechanicsburg, a federal office under the Department of Defense, Department of the Navy. The primary point of contact is Lydia M. Shaloka (Telephone: 215-697-4717, Email: [email protected]). Certification data and documentation must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to shipment.
**Procurement Type and Set-Aside**
This solicitation is a fixed-price procurement and is issued as a Total Small Business Set-Aside, encouraging participation from qualified small businesses. The order is "DO" rated under the Defense Priorities and Allocations System (DPAS), certifying its importance for national defense and emergency preparedness. Emergency Acquisition Flexibilities (EAF) are invoked, and past performance will be considered in the evaluation of offers.
**Special Considerations**
- **Inspection and Acceptance:** No material may be shipped prior to receipt of acceptance. Certification documentation must be submitted via Wide Area Work Flow (WAWF), with specific instructions for notification and acceptance.
- **Quality and Compliance:** The contract requires rigorous quality assurance, traceability, and compliance documentation, with government inspection at both prime and subcontractor facilities.
- **Configuration and Change Control:** All waivers, deviations, and engineering changes require government review and approval.
- **Priority and Schedule:** The delivery schedule requires submission of certification data 20 days prior to scheduled delivery, review within 6 working days, and final delivery within 365 days of contract effective date.
**Constant Elements Throughout Contract Lifecycle**
Throughout the contract lifecycle, the following elements remain constant: the criticality of the item, the requirement for full traceability and compliance, the necessity for government source inspection, the use of robust quality systems, and the adherence to configuration control and change management procedures. The contract’s emphasis on safety, reliability, and compliance with military standards underscores its importance to national defense.
**Summary for Contractors**
Contractors considering this opportunity should possess demonstrated capabilities in manufacturing high-grade fasteners for critical applications, maintain robust quality assurance systems, and be prepared to meet stringent traceability, certification, and compliance requirements. The solicitation is well-suited for small businesses with experience in defense-related manufacturing and quality control. Interested parties should review the full solicitation at https://sam.gov/opp/d2f1c1fd2b17453c8812deaaf2e40250/view and direct any inquiries to the primary contact listed above.
Response deadline is August 19, 2026, at 20:08. The notice remains active and is accessible via SAM.gov.