WASHER,EHF

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFF46

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Classification Code

99

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QFF46) for the supply of a specialized washer (Part Number S-5343934-1/3-002) intended for use in a critical shipboard system. This procurement is classified under NAICS Code 333998 (All Other Miscellaneous General Purpose Machinery Manufacturing), reflecting the requirement for precision manufacturing and rigorous quality assurance. **Purpose and Scope** The washer to be procured is designated as SPECIAL EMPHASIS material, falling within both the Level I and Scope of Certification (SOC) boundaries. Its application in a crucial shipboard system means that any deviation, defect, or incorrect material could result in catastrophic failure, serious injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes stringent control procedures to ensure the correct material is received and installed. **Key Requirements and Objectives** - **Technical Specifications:** The washer must conform to Dry Deck Shelter Specification S-5343934-1 as modified by CSD673, with material requirements specified as QQ-N-286, annealed and age hardened. Mechanical properties must align with S-5343934-1, Paragraphs 3.3.2 and 3.3.2.1. No weld repair is permitted on QQ-N-286 material. - **Testing and Certification:** Certifications are required for annealing and age hardening, dye penetrant inspection, and ultrasonic inspection (for items made from QQ-N-286 with a diameter or minimum distance between parallel surfaces of 4 inches or greater, or as specified in drawings). The Slow Strain Rate Tensile Test must be performed by one of several designated laboratories. - **Traceability and Compliance:** The contractor must maintain traceability from the material to certification test reports and other Objective Quality Evidence (OQE). Certification data must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). - **Quality Assurance:** A quality system in accordance with ISO-9001, ISO-10012, ANSI-Z540.3, and ISO-17025 is required. The contractor’s quality system and products are subject to government evaluation, verification, inspection, and acceptance. Government Quality Assurance will be performed at the source, and the contractor must make facilities available for audit. - **Configuration Control:** The contractor must maintain the equipment baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters. - **Material Handling and Inspection:** Procedures for material control, segregation, marking, and inspection are required to prevent commingling and loss of traceability. Receiving inspection must verify traceability markings and certification test reports for compliance. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. **Expected Deliverables** - Washers manufactured and tested in accordance with the specified requirements and standards. - Complete certification documentation for each shipment, including test results, traceability, and compliance statements. - Electronic submission of certification data via WAWF, with no material shipped prior to acceptance. - Maintenance of quality and configuration control throughout the contract lifecycle. **Contracting Entity and Contact Information** - **Contracting Entity:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Benjamin T. Spangler, Telephone: 771-229-0573, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/fa9d9ec38aeb48b28057c63d5913b1e5/view) **Procurement Type and Special Considerations** - **Solicitation Type:** Fixed-price supply contract - **Set-Aside Status:** The original small business set-aside has been dissolved; all qualified contractors may respond. - **DPAS Rating:** Any contract awarded will be a "DO" rated order, certified for national defense use under the Defense Priorities and Allocations System (DPAS). - **First Article Testing:** Required; see FAR 52.209-3 for details. Submission of certification data CDRLs is due 20 days prior to scheduled delivery, with FAT report due 180 days after approval of PRLT and final delivery within 365 days of contract effective date. - **Past Performance:** NAVSUP WSS will consider past performance in the evaluation of offers. **Constant Elements Throughout Contract Lifecycle** - The washer’s critical safety designation and associated quality assurance requirements. - The requirement for traceability, certification, and compliance with specified standards. - The obligation to maintain configuration control and submit ECPs for any changes. - The necessity for government source inspection and acceptance prior to shipment. - The use of WAWF for certification data submission and payment processing. **Summary for Contractors** This solicitation represents a highly specialized and demanding procurement for a washer used in a critical shipboard application. Contractors must demonstrate robust quality systems, traceability procedures, and the ability to comply with rigorous testing and certification requirements. The contract will require close coordination with government representatives, adherence to configuration control protocols, and timely submission of documentation via electronic systems. Interested parties should carefully review the technical specifications, quality assurance requirements, and submission instructions to ensure alignment with their capabilities and compliance infrastructure. For further information or to request access to drawings, contractors should contact the primary POC listed above and follow instructions on the SAM.gov solicitation page.