TAILPIECE,UNION

Key Dates
Due Date

-

Posted Date

-

Agency & Value
Agency

NAVSUP WEAPON SYSTEMS SUPPORT MECH

Contract Value

Not provided

Codes & Classification
Solicitation Number

N0010426QFF42

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Classification Code

4730

Additional Details
Set Aside

None

Place of Performance

-

SourceSAM
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH), has issued a solicitation for the procurement of a "TAILPIECE, UNION," classified under Product Service Code 4730 (Hose, Pipe, Tube, Lubrication, and Railing Fittings) and NAICS Code 332919 (Other Metal Valve and Pipe Fitting Manufacturing). This procurement is a total small business set-aside, inviting qualified small business contractors to submit proposals for the manufacture and delivery of this critical shipboard component. **Purpose and Scope** The tailpiece union covered by this contract is designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) due to its application in a crucial shipboard system. The integrity of this item is paramount; incorrect or defective material could result in catastrophic failure, serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the procurement invokes rigorous control procedures and quality assurance requirements to ensure the correct material is received and installed. **Key Requirements and Objectives** The contract specifies the manufacture of four (4) units of the tailpiece union, in accordance with detailed Naval Sea Systems Command drawings and specifications. The primary material for the critical part (Tailpiece, piece 73-S1) is ASTM-B369 UNS C96400, and quantitative chemical and mechanical analysis is required for certification. The scope includes: - **Testing and Certification:** Non-destructive tests (including weld repair and production welds), dye penetrant inspection, hydrostatic testing, and weldability tests are required, with certifications to be submitted for each. - **Pressure Tolerance:** Strict pressure and time tolerances for testing are defined, with confidential hydrostatic test pressures referenced by drawing and item number rather than actual values. - **Radiography:** Radiographic inspection is required for Tailpiece, piece 73-S1, with permanent marking and traceability to RT film. - **Thread and Welding Requirements:** All internal threads must be cut (not cold-formed), and thread inspection must follow FED-STD-H28 or ASME B1 standards. Welding and brazing must comply with NAVSEA and MIL standards, with procedures and qualification data submitted for approval. - **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface. - **Mercury-Free:** No mercury or mercury-containing compounds may be used or come into contact with supplied hardware. - **Traceability and Certification:** Comprehensive traceability from material to certification test reports is required, with permanent marking and documentation throughout all process operations, including subcontracted work. - **Quality Assurance:** Contractors must maintain a quality system compliant with ISO-9001 (or MIL-I-45208 as an alternate), with calibration systems per ISO-10012 or ANSI-Z540.3/ISO-17025. Government quality assurance at source is mandated, and facilities must be available for audit. - **Inspection and Acceptance:** Final inspection includes form, fit, and function checks, lot acceptance based on zero defects, and 100% inspection of material verification and traceability. No material may be shipped prior to government acceptance. - **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements. **Contracting Entity and Contact Information** - **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS MECH) - **Department:** Department of Defense, Department of the Navy - **Primary Contact:** Lydia M. Shaloka, Telephone: 215-697-4717, Email: [email protected] - **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/ea48473e05d647bbac023af2a95c6e25/view) **Procurement Type and Special Considerations** This solicitation is a fixed-price contract, issued under Emergency Acquisition Flexibilities (EAF), and is a "DO" rated order under the Defense Priorities and Allocations System (DPAS), certified for national defense use. The procurement is a total small business set-aside, requiring compliance with the Buy American Act, Free Trade Agreements, and Balance of Payments Program. Past performance will be considered in the evaluation of offers. **Submission and Deliverables** - **Certification Data:** Must be submitted to Portsmouth Naval Shipyard for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). - **Delivery Schedule:** Certification data CDRLs due 20 days prior to scheduled delivery; radiographic shooting sketches within 45 days after contract award; production radiography within 135 days after approval; final delivery within 365 days after contract effective date. - **Documentation:** Contractors must submit certificates of compliance, test certifications, weld procedure qualifications, and maintain inspection records traceable to material. **Constant Elements Throughout Contract Lifecycle** - Rigorous quality assurance and traceability requirements - Compliance with Navy and federal standards for material, testing, and certification - Government inspection and acceptance prior to shipment - Configuration control and documentation of any changes - Mercury-free requirement - Total small business set-aside and DPAS priority rating **Conclusion** This procurement represents a highly controlled, quality-assured opportunity for small business manufacturers specializing in metal valve and pipe fitting production, particularly those with experience in critical shipboard systems and compliance with Navy standards. Contractors must be prepared to meet stringent material, testing, certification, and traceability requirements, and maintain robust quality systems subject to government audit and inspection. Interested parties should review the full solicitation and associated drawings and specifications, and direct any questions to the primary contact listed above.