BALL,BEARING
Key Dates
Due Date
-
Posted Date
-
Agency & Value
Agency
NAVSUP WEAPON SYSTEMS SUPPORT MECH
Contract Value
Not provided
Codes & Classification
Solicitation Number
N0010426QFF33
NAICS
332991 - Ball and Roller Bearing Manufacturing
Classification Code
3110
Additional Details
The Department of the Navy, through NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), has issued a solicitation (Procurement Identifier: N0010426QFF33) for the supply of a Ball, Bearing component, classified under NAICS Code 332991 (Ball and Roller Bearing Manufacturing) and Product Service Code 3110. This procurement is critical to the operational integrity of shipboard systems, with the supplied material designated as SPECIAL EMPHASIS (Level I, Scope of Certification, or Quality Assured). The solicitation is active and responses are due by October 6, 2026.
**Purpose and Scope**
The primary objective of this procurement is to acquire Ball, Bearing components for use in crucial shipboard systems. The failure or malfunction of these components could result in catastrophic outcomes, including serious personnel injury, loss of life, or loss of vital shipboard systems. As such, the solicitation invokes stringent quality assurance and traceability requirements to ensure the receipt of correct, defect-free material.
**Key Requirements and Deliverables**
- **Technical Specifications:** The Ball, Bearing must conform to ASTM F2215 and MS19064, Part number MS19064-20014, with additional requirements as specified in the solicitation. Material must be QQ-N-286, either annealed (hot finished or cold drawn) and unaged or age hardened.
- **Testing and Certification:** Quantitative chemical and mechanical analysis is required. Certifications must be provided for annealing, age hardening, ultrasonic inspection (for items with diameter ≥4 inches or as specified), and hardness testing (minimum 27 HRC per ASTM-F2215). An additional finished ball from each heat/lot must be included for hardness verification.
- **Quality Control:** Only sources with an acceptable Quality Control Manual are eligible for award. The contractor must maintain a quality system in accordance with ISO-9001, ISO-10012 or ANSI-Z540.3 with ISO-17025, or MIL-I-45208 with MIL-STD-45662 calibration requirements. The quality system is subject to government evaluation and audit.
- **Traceability:** Full traceability from material to certification test report and other Objective Quality Evidence (OQE) is mandatory. Traceability markings must be permanently applied or affixed via durable tags for items with limited marking surface.
- **Configuration Control:** Contractors must maintain baseline configuration and submit Engineering Change Proposals (ECPs) for any modifications affecting form, fit, function, or interface parameters.
- **Mercury-Free Requirement:** Mercury and mercury-containing compounds must not be intentionally added or come into contact with supplied materials.
- **Packaging:** Preservation, packaging, packing, and marking must comply with MIL-STD 2073 and contract schedule requirements.
- **Inspection and Acceptance:** Government Quality Assurance at source is required. No material may be shipped prior to receipt of government acceptance. Early and incremental delivery is acceptable at no additional cost.
- **Subcontractor Oversight:** The prime contractor must ensure sub-tier suppliers meet all quality and traceability requirements, including periodic audits and compliance with contractually invoked quality systems.
- **Certification Data Submission:** Certification documentation must be submitted to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to each shipment, via Wide Area Work Flow (WAWF). No material is to be shipped before acceptance.
**Contracting Entity and Contact Information**
- **Contracting Office:** NAVSUP Weapon Systems Support Mechanicsburg (NAVSUP WSS), a federal office under the Department of Defense, Department of the Navy.
- **Primary Contact:** Jordan D. Neely, Telephone: 717-605-8197, Email: [email protected]
- **Notice URL:** [SAM.gov Opportunity](https://sam.gov/opp/cbe8f95e0aad4378aeb6c2ba26ebb686/view)
**Procurement Type and Special Considerations**
- **Solicitation Type:** Fixed-price supply contract.
- **DPAS Rating:** Any contract awarded will be a "DX/DO" rated order certified for national defense use under the Defense Priorities and Allocations System (DPAS).
- **Buy American/Trade Agreements:** Compliance with Buy American, Free Trade Agreements, and Balance of Payments Program is required.
- **Small Business Subcontracting Plan:** Applicable for DoD contracts, as referenced in the solicitation.
- **Warranty:** One-year warranty from date of delivery for supplies of a noncomplex nature.
- **Quality Assurance:** Higher-level contract quality requirements apply, with detailed inspection, certification, and compliance documentation required.
**Constant Elements Throughout Contract Lifecycle**
- The requirement for rigorous quality assurance, traceability, and certification will remain constant.
- The need for compliance with technical specifications, government inspection, and acceptance procedures will persist.
- Configuration control, including the submission of ECPs for any changes, is a standing requirement.
- The prohibition of mercury and weld repair on QQ-N-286 material is ongoing.
- The obligation to maintain and document a compliant quality system, subject to government audit, is continuous.
- All certification data must be submitted and accepted prior to shipment, with no exceptions.
**Summary for Contractors**
This solicitation represents a highly specialized and critical supply requirement for the U.S. Navy, demanding strict adherence to technical, quality, and traceability standards. Contractors must demonstrate robust quality control systems, proven past performance, and the ability to manage complex certification and traceability processes. The opportunity is best suited for manufacturers with experience in producing Level I/SUBSAFE material for defense applications, particularly those familiar with naval shipboard systems and the associated quality assurance protocols. Interested parties should review the full solicitation and ensure their capabilities align with the comprehensive requirements outlined herein.